What is System.Data.ni.dll

Similar Questions

• error starting "C:\Document and Setting\user_name\Application Data\wlaplg.dll the specified module cannot be found"

  Original title: error loading of C:\Document and Setting\user_name\Application Data\wlaplg.dll the specified module could not be found

  For two or three weeks there whenever I boot my netbook and connect to my user account window I found this error message RUNDLL pop-up window:

  Error loading of C:\Document and Setting\myusername\Application Data\wlaplg.dll

  The specified module could not be found

  What is the problem? and how to solve?

  Hello

  Click on Start menu and click Run.
  Inside run, type MSCONFIG and press Ok.
  Now, you will get a System Configuration window.
  Inside you go to the tab called start-up
  In the Startup tab, you can see a list of files from loading when you start the computer.

  There, you can see the above file Rundll32, "C:\Document and Setting\user_name\Application Data\wlaplg.dll ' like this.

  A chech this one and press apply and press Ok.
  Now you will be asked to restart the computer.

  The problem will be solved after restarting...

• What I do with gdiplus.dll?

  What I do with gdiplus.dll? He appeared recently on a separate disc I have. I have several internal hard drives. It is not on the c drive.

  I can't know when it appeared, and it is probably due to an update of Windows.

  Any advice?

  Thank you.

  I have 7 copies of gdiplus.dll in different folders.

  One is for the FTP program I use, one for MS Office, one for a program to screen capture that I use and the other 4 are in different windows side by side (c:\windows\WinSxS...) files.  All the gdiplus.dll file are made by Microsoft, but they are different versions under the folder of installation of these programs.

  I don't have Nero installed so can't look down there.

  Files in WinSxS files are created and filled when you install several C++ Redistributable Runtime and contain executable files and DLLs that some third-party programs that you have installed may have need, so you could have more, less or no files in WinSxS.  WinSxS is the technology that allows you to have multiple copies of the different versions of the files with the same name on your system at the same time.

  Some of mine back in 2001, but it is not the date they have been installed, it is the date of creation of the file.  Some of my friends are of different sizes, dates and versions, but all belong to Microsoft (look at the properties, the company and the product name).  The programs that need to use the gdiplus.dll file to retrieve the copy they need to in the right place at the right time when they need.

  If you say where you found the file mysterious gdiplus (which is the full folder path to the file), then you know what program installed and put there.  I don't think it should just be hanging around flapping in the breeze, a place...

  If you don't like it, rename it to something like gdiplus.xxx and if something he needs to spend between the program and your screen or printer and can't find it, I can see this program would be a bad operation and if all goes well complain is missing.

• blue screen error message: < root Windows >-system 32\ hal.dll. missing or damaged

  Problem: Cannot start (not even in safe mode)

  Operating system: Windows XP pro

  PC: DEll 2400

  Error message on blue screen:
  "Windows did not start because the following is missing or damaged:

  ------System 32\ hal.dll.

  I do not reformat the hard drive and lose all my programs and data.

  If anyone can help, I would be extremely grateful.

  Thank you

  HAL811

  Hello

  I have fixed many times by the steps described in this article...

  http://support.Microsoft.com/kb/330184

  This is not guaranteed because the problem can be reduced to hard drive failure rather than just the corruption of the boot.ini file.

  If it does not solve the problem, post back and I will get back on it.

  Tricky

• Receive error message: "C.\windows\system 32\TAPI32.dll" is not designed to run on Windows at startup.

  original title: how to fix "C.\windows\system 32\TAPI32.dll".

  When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider."  What can I do to fix this?

  Hello

  You did changes to the computer before the show?

  Method 1: Follow these steps and check if that helps.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• ESXi 4.1 reinstall without loss of data in the system data store

  Hello world

  because of incorrect tape device configuration (see more low http://communities.vmware.com/thread/289847?tstart=0), I have to reinstall Esxi 4.1 in the same place where the system partition is also home to the Oracle data disk (I didn't have the choice because the system starts on the table of great raid with SSDS, there was no such thing which allow me to pre partition the RAID disk into several partitions and choose) only a small partition to install ESXi files), what happens if I reinstall ESXi with the method of "REPAIR"? will be large files within the system data store destroyed or intact?  Help, please.  Any suggestions are greatly appreciated.

  When you do a normal installation of ESXi, the whole installation drive is wiped regardless of the existing partitions that exist.  With a repair only install ESXi system partitions are left.  Any data store must be perserved and after the repair, you can save any virtual machines that were welcomed on this data store.  If the repair not proceed with the installation (for example, if the data store exists in the first 900 MB of storage), then you will get a warning in this sense and a new facility (wipe the entire disk) is performed.

  So with a repair, you should be fine, but I want to take a backup without worrying.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• I thought WWDC 2016 TEU June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  I thought WWDC 2016 was just June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  WWDC is the 13th week, not a single day. However, at 10:00 13 will be the speech. It's what you want to watch. You can download the application to your computer via: Developer Apple WWDC Watch - WWDC -. You can download the app for iPhone, iPad, or contact via the iTunes Store.

• What are the data size of the buffer on PX1394E - 3 50

  Hello

  I bought this drive a few days ago and I'm a little confused on the
  the size of the data buffer. The box indicates 16 MB, Toshiba web page says 8 MB, etc...

  Nobody knows, what are the data buffer size of this model?
  Is there a SW or the request to meet with whom?

  BTW, great car, fast, noise, however, extremely when it comes to finding large files.

  Thank you
  Francisco

  Hello

  I have lurked around a bit and it seems that your drive has buffer of 16 MB that is absolutely definitely sure. To check the details of your computer, you can use the tool "Sisoft Sandra". You can download [url href = http://www.sisoftware.net/index.html?dir=&location=downandbuy&langx=en&a=] here [/ URL].

  After download, just install it and you will get all information about your computer, as the size of the buffer of your external hard drive.

  Welcome them

• I have a desktop computers G4 and G5 that I would like to upgrade the operating system.  Should what operating system I install?

  I have a desktop computers G4 and G5 I want to install the more recent/better OS for these machines.  What operating system should I buy?

  I would recommend Tiger (10.4). Its more stable then Leopard (10.5).

• What operating system I use for iPhone 4?

  What operating system I use for iPhone 4? It will work with OS 9?

  7.1.2 No. is as high as possible.

• What is a data? What is its use?

  What is a data? What it is?

  Kind regards

  Karine

  Also look at this pdf file

• Motherboard - Z68MA-ED55 (B3): what operating system should it install?

  One of my friends has old computer that has the motherboard called, "Z68MA-ED55 (B3).

  He lost the XP CD and it's serial number, the cause of incidents.

  He wants to install OS in this computer.

  What operating system, it must buy and install?

  And if there are drivers of OS (Windows) for "Z68MA - ED55 (B3)"?

  Hello

  You always check the Web site of the manufacturer of the motherboard for the compatibility of the operating system and drivers.

  The motherboard manufacturer provides drivers, not Microsoft.

  http://us.msi.com/product/MB/Z68MAED55_B3.html#hero-overview

  See you soon.

• HP connection manager exe. Could not load the Assembly system.data, Version = 1.0.61.0, culture = SQ Lite...

  have new laptop dv7 and continue to receive the window... HP connection manager exe.

  "Cannot load the Assembly system.data, SQ Lite, Version is 1.0.61.0, culture = neutrral, db937bc2d44ff139 = public key token.

  The application will now exit.

  Please identify your laptop / pc

  Look at the basic/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Do not post not the serial number of your product because it is private and considered to be personal information. ###
  
  Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

  Not showing information as requested could delay our responses and troubleshooting slow the question that led you to create a thread. We want to help you, so please help us help you.

  Have you gone to your laptop's web support portal and tried the HP software box software?

  This would certainly be a good starting point.

  Removing and reinstalling the software HP Connection manager is also a good plan. It is also located on the web portal of support for your laptop.

  Best regards

  ERICO

• What operating system is compatible with PaperPort Professional 12, Dokmee home 3.2.0.17 and BlueDoc?

  What operating system is compatible with Port Professional 12, Dokmee home 3.2.0.17 and BlueDoc paper?

  Hello
  I suggest you refer to the following article provided by the manufacturer of the program.
  http://www.nuance.com/for-business/by-product/PaperPort/professional/index.htm
   
  It would be best to contact Nuance for help.
  Shade support: http://www.nuance.com/support/PaperPort/index.htm
   
  Hope the information is useful.

• What is the date of end SQL server 2008 SP2 support?

  What is the date of end SQL server 2008 SP2 support?

  Have you tried Google? or:

  ASK THE QUESTION IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer