Satellite Z830 - webcam not working not not because upgrade W10

Similar Questions

• Satellite C855: webcam not found - initialization failed

  * Hello.
  I have a Toshiba Satellite C855 and I had a problem because I spent in windows 7 64 bit (I was on 32 bits), the problem is that I can't find the webcam.and when I run the "Toshiba Web Camera Application" application in the device driver it displays this message:

  + the failure of the initialization of the webcam. Check the operation of the camera, and then restart the application or restart the computer. +

  I don't know what to do I just try to update the driver on the official website of Toshiba, also uninstalation instalation and all... nothing worked.

  Please help me.
  and I thank you in advance.

  Post edited by: soubou

  Is the webcam or any device marked with visible yellow exclamation point in Device Manager?

  Otherwise, the webcam module is defective and must be replaced.

• Satellite L500 webcam stopped working

  Hi guys,.

  I obtained through Satellite L500, webcam quality is very bad, especially @night time. But suddenly it stop working while I was on windowLive messenger with Windows 7.
  I tried a few settings but does not work. It shows the light but in window have only a green landscape.

  Could you please someone help me?

  > obtained by Satellite L500, webcam quality is very bad, especially @night times

  Check this Toshiba document on the quality of the webcam:

  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  and this one;

  + Bad image quality when using the internal webcam under dark light conditions +.
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  Welcome them

• Satellite Z830 - cannot install the Eco utility because of the wrong version of the OS

  I installed Windows 8 from the original CD (not an update) and installed many pilots. When I try to install the Eco utility, it goes all the way to the end but then tell me that the operating system is not supported with load (translated) and cancel the installation.

  What can I do?

  Concerning
  Benny

  NB: Satellite Z830 and this is the version Win8 Eco Util (eco-20121126101818)

  Can you please post exact model laptop (Z830-xxx)?
  I just want to check if Win8 drivers are available for your laptop satellite.

  http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp

• Satellite A300 - Webcam not working not because I installed Win7

  Hello

  I have toshiba laptop Satellite A300, it had windows vista installed in this laptop, but I formatted and installed Windows 7 and since I installed this windows 7 my webcam is not working it gives an error "webcam driver open fail.please restart camera or computer" and even after doing this its does not work.

  And after the installation of this window, I think that the display setting is also out of order, I tried to install the drivers and sorftwares support toshiba but without success.

  I need help to solve this problem. Help, please

  Thanks in advance.

  We hope to hear soon.

  Hello sajjad

  I ve made very good experiences with Satellite A300 and Win7. In front of me, I have Satellite A300-1LI. This is the PSAG8E model and I can confirm that everything works perfectly.

  I have an offer for you:
  Send us please phone model correct and we can check the Toshiba download page to see what's available for Win7 for your laptop model.
  I can also send you exact order facilities how to install all the stuff from Toshiba.

  Please let us know what you did to get the camera work.
  Let us know how you installed Win7 and all the stuff from Toshiba (drivers, tools and utilities).
  You have other issues with Win7 on your Satellite A300?

  See you :)

• Satellite A660 - Webcam not working not

  Toshiba Web Camera Application using - worm 1.1.1.15, no video or photos available.
  Blue light comes on and record sound in video mode, by plaayback.

  All active device manager looks OK.
  Uninstal USB 2.0 Camera, restart, log on to Toshiba get latest version of the software, without change.

  Install the new external camera OK.
  All advice please?

  Hello

  The laptop supports face recognition?
  In my case that the webcam is not working because of the facial recognition software something wasn't there and the webcam has been locked by another application... It's the facial recognition software

  I uninstalled the facial recognition, then webcam software
  Then I restarted the laptop and cleaned the registry with CCleaner (freeware tool can be downloaded many 3rd party pages).
  Then installed software of the webcam and facial recognition utility
  After that, the webcam reworked

• Satellite L350D - Webcam not working no-webcam must be restarted

  Hiya,

  first of all I don't know if there is a warranty issue, but I always seems to be getting in post offices closing at present.

  The new laptop sometimes seems to play and suggest the unrecognized USB device.
  In addition to that the webcam is not listed in the hardware setup.

  I tried to reinstall the webcam drivers, but although they install ok computer is actually the webcam, i.e. it is not listed in system devices and force Vista to get the camera does not lead to a bit of luck. (the adjacent microphone for the webcam works fine).
  Whenever I start the computer it tells me now that I need to restart the computer or the webcam.

  I'm running Vista 32 bit, the 250 d being a 1.9Athlon core duo with 2 GB of ram and certainly comes with a webcam (I don't seem to recall the little blue light come early during installation, but never again since).

  Is it worth getting a hard reinstall, even if Windows is normally good enough to pick up new equipment surely?
  I had a look on other webcam issues, but the drivers are not good because I can't really do the webcam anything.
  I've been on the guarantee page but you are trying to enter the serial No. He said: there is no.

  Any ideas?

  Thank you, Jason

  * Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.
  * Install the Service Pack 1 of Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
  * Update your e-mail software (MSN/Yahoo Messenger, etc...)
  * If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.
  * Try to close the bar Assistant camera on the left side of the office.
  * To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

• Satellite L350 - webcam not working not

  I can bring to the top of the toolbar web camera by moving to the left of the screen.

  But although I could make a couple of days, I now cannot start the camera.
  By clicking on the camera via the bar assistant software startup does not work either.

  When I click on each of the options in the toolbar, I get a very fast blue circle which rotates as it loads, but then it does nothing.

  Please can someone advise what I need to do?

  Hello

  Try to remove preinstalled Camera Assistant software for Toshiba restart your laptop and install the latest version of Toshiba support page

• Satellite C660 - webcam not detected in Skype, worked fine yesterday

  Hello

  Today morning when I open Skype and went to tools, Options, settings of the video, he gave "no webcam found.

  It was working fine until yesterday.

  When I check in DeviceManager, imaging devices, "Chicony USB 2.0 camera" is listed. When I rt click and say of the properties under the general tab it says: this device works properly, on the driver tab, driver date is 26/06/2006 and the driver version is 6.1.7600.16385. The driver update will solve this problem?

  Webcam is properly recognized in Device Manager?
  It works with Toshiba webcam application?

• Satellite A660 - Webcam not found at all

  Hello

  I was wondering if someone could help me please. I tried to use the webcam on my Satellite A660 PSAW3A 0TK00R using Windows 7 32 bit. When I open the Toshiba "Web Camera Application" application, the application will not load again and he says to the camera cannot be found.

  When I try to use the web cam on another application like Skype, webcam for TOSHIBA Analog Capture (Dev1 path2) he has said "unable to start the video. Try closing other programs that may use your webcam "."

  I tried to download the Toshiba Web Camera Application Webcam 1.1.1.15 Windows 7 32 bit 28,78 MB of the Toshiba site and who does nothing after she extracted. I followed the extraction to the temp directory and tried the file setup.exe. It uninstalled the Web camera Application. Restarted the computer, and then run Setup.exe and it reinstalled the program.

  After doing this, the problem is always exactly the same. I looked for the driver in Device Manager and you can not find a driver related to the webcam to restart. Anyone have any ideas on how to get the webcam working?

  Thank you very much

  Nick

  Hello

  I recommend a new installation driver webcam

  This means that you need to remove the current version of the driver for the webcam (Control Panel > uninstall a program) and then restart your computer. Use Ccleaner or another registry to remove bad registry keys and restart again. Then install the latest driver for the webcam that you can find.

  Check this box!

• Satellite A660 webcam not in the list of devices

  A660 PSAW3A-07R00R had for a few years, but cannot use the Webcam because it is not in the list of devices. I downloaded the webcam application several times, with the last V1.1.1.15, but does nothing after extraction.

  >.. .but does nothing after extraction
  It means that start software install doesn t or what?

• Satellite L670D will not be upgraded to 6 GB to 8 GB of RAM

  When I got my L670 I upgraded the RAM 6 GB by adding a module of 4 GB to 2 GB provided. Everything worked fine for a year., but now I want to spend the 8 GB maximum. I bought another 4 GB module to replace the 2 GB.

  However, the machine does not even the BIOS unless the 2 GB module is in the first Bay. It will run as a 6 GB machine with a module of 4 GB and as a 2 GB machine, but will not accept 4 GB modules in the first Bay or two 4 GB of all modules.

  Anyone got any ideas on this subject?

  With RAM modules compatible everything should work ok.
  Do you use 4 GB compatible modules?

  Plese post model mobile exact (L670D-xxx). I just want to check what part number has compatible 4 GB Ram for your laptop.

• All-in-one HP 1514: HP all-in - one 1514 print not because upgrading windows 10

  I have upgraded to windows 10 and since then have not been able to print from my computer. It is connected via USB.

  I can print test pages and conduct analyses, but when you try to print a document or email, it cannot communicate.

  I've done all the windows updates available for me, I've updated the drivers, I downloaded the e-all-in-one HP Deskjet 1510 serial printer drivers and full software functionality and followed the instructions. I have uninstalled and reinstalled the printer and restarted the computer after each retry.

  At first, he said that I needed to connect the USB key (even if it was connected). After uninstall and reinstall, it finally noticed that it was connected, but still will not print.

  Help, please...!

  HI @curl79,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Deskjet 1514, after the upgrade to Windows 10. And I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Once you complete these steps, run the program printing HP and doctor Scan and let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that these aid measures and hope to hear from you soon!

• Satellite A300 - Webcam driver open fail after the upgrade to Windows 7

  Hello

  Given that I improve my system to Windows 7 64 bit does not work my webcam. After installing the driver I get the message "webcam driver open failed. "Please restart camera or computer. The camera also do not appear in Device Manager and the microphone are not working also.

  I have a Satellite A300-1LT.

  Help!

  Tal

  Hi pro.surfer,

  You know the forum search? If this isn't the case, you must use because you will find many threads with this error message and lots of useful training, what to do to.

  I put t know which driver you mean, but you need the Camera Assistant Software for webcam. The microphone is a part of webcam, so you need to install the driver for the webcam. ;)

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.