What is the actual size of a varray (empty) in a folder?

Similar Questions

• What is the maximum size of print for Photoshop sketch for ios?

  All I can find is that you can export to illustrator at 4 x the size. 4 x what? It never specifies what is the actual size. Is the original 12 parsecs everywhere? 6 lengths of banana? 17 mm? Nobody knows the answer to that?

  The resolution is 2048 x 1536 for the sketches created on the iPad. Sketches created on iPad Pro are 2732 x 2048.

• What is the maximum size of HARD drive, I use in my dc7600 CMT

  I use a HP dc7600 CMT, which works well after the upgrade to a Samsung 128 GB SSD Intel Pentium D 3.4 GHz, 4 GB of RAM and an AMD Radeon HD 6450. I'm under Win 8.1 Pro x 64, with the most recent upgrade and have absolutely no problem. Now, I want to add a second internal HDD and I wonder what is the maximum size that I can go to. I can't go up to 2 TB, or am I limited to a lower number? 1 TB? 500 GB? 250 GB?

  Will be happy to help here, especially if he actually tried to apply in practice.

  Thanks in advance.

  Best regards

  Hello:

  In theory, you'd be limited to 2 TB.

  The biggest HARD drive I have ever installed in my dc7600 CMT was a 1 TB of HDD, so I can't confirm that a 2 TB drive will absolutely work.

• Questions regarding the process of implementing container/control. How "parent of filling" and how to get the actual size of the control?

  I'm writing some UI component custom waterfalls. I went if the document several times and still have two questions:

  1. is it possible to adjust the width of the control to fill the container parent without specifying the number hardcoded in pixel? I see many example of code uses '768' as hardcoded width.

  2. I understand that the 'preferred size' could be ignored in some cases. Is it possible that I can get the actual size of the control on the screen programmatically?

  3. is there any signal was issued when a control container/finish covering all of its child nodes? How do I know what size of a control is finally decided?

  Thank you

  mdodd wrote:

  (1) you can use (QML)

  horizontalAlignment: HorizontalAlignment.Fill
  

  or (C++)

  myControl->setHorizontalAlignment(HorizontalAlignment::Fill);
  

  This will cause control occupy the entire width available to its parent. However, keep in mind you may have to use this property on all containers of parent to the node root to get the width of the full screen.

  As far as I KNOW simon_hain is located on the other two issues.

  ((2) & (3) I just dug around and you find LayoutUpdateHandler would do the job:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__layoutupdatehandler.html

  mdodd answer on question 1) is correct.

  I can't believe they made a separate category for such a common task. Framework of stunts have had some serious consistency problems, that's what I feel.

  Thanks to all who have contributed to

• When I resize a photo to the web LR displays a very small image, not the actual size.

  When I resize a photo to the web LR displays a very small image, not the actual size that appears when I download on a website! ???

  Yes, it should work. It should show you exactly what the image will look like on normal, non-retine displays. At least if you have the resolution of your screen (in preferences-> display system) the value 'best for display '. In this case your computer exactly double the resolution.

  The link I posted above is for when you want to go further. In fact, he shows how to send images of different sizes to people looking at your site on the retina against those who seek to your site on normal screens. This will allow a still sharper image that people can get on a display to display. What it basically does is make their web browser asks a 1600 pixel image if only they are viewing on a screen high resolution while asking a low-resolution image 800 pixels for people using normal poster. This example uses all available pixels to choose the type of display. It takes just a bit of HTML and javascript coding. My main site done automatically like smugmug has this built already, but my blog site does not automatically so I had to code around it. This makes your images look amazing on the screens with high resolution such as on the screens of the retina and iPads.

• Why export dump shows at least that the actual size?

  Why export dump shows at least that the actual size?

  A large number of parameters must be taken into account. For example, for an empty table, only the DOF will be exported even if the segments are re-created when import. I'm not sure of what you are looking for and why, but a size of dump export has a little to do with the occupation of segments.
  I suggest you read the note * overview of original export and import utilities [61949.1 ID] * +, it is well explained.

  Nicolas.

• What is the minimum size Flash DRIVE bootable installation of Sierra?

  When you make a bootable installation of Sierra, what is the minimum size of USB that is required?

  8 or 16GBs.

  Installers for OS X Mavericks to Sierra bootable USB

  First, review this introductory article: creating a Setup program bootable OS X Mavericks or Yosemite - Apple Support. Second, see this diagram how to create an El Capitan bootable Installer. Just replace the Terminal command with that of the previous article by copying it in the Terminal window.

  You will need a 8 GB or more flash disk USB that has been partitioned and formatted for use with OS X.

  Drive partition and format

  1. Open utility disk from the Applications\utilitaires folder.
  2. After disk utility charges select the drive (entrance Out-bumpy with of the mfgr.) ID and size) in the list to one side.
  3. Click clear in the utility disc toolbar. Name of the player, "MyVolume". <-IMPORTANT!
  4. In the Group dropdown set the GUID partition scheme. Define the type of Format Mac OS extended (journaled).
  5. Click apply and wait for the done button to activate it. When it click on it.
  6. Quit disk utility.

  Create the installation program

  Open the Terminal in the Utilities folder. Choose according to the command line appropriate (in red) on the OS X installer you want. Paste this entire command line by underneath at the Terminal prompt:

  Order for macOS Sierra:

  sudo/Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia--volume/Volumes/MyV--applicationpath/Applications/Install\ macOS\ Sierra.app

  Order for El Capitan:

  sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/MyVolume--applicationpath/Applications/Install\ OS\ El\ Capitan.app X\ X\

  Order for Yosemite:

  sudo/Applications/Install\ OS\ Yosemite.app/Contents/Resources/createinstallmedia--volume/Volumes/MyVolume--applicationpath/Applications/Install\ OS\ Yosemite.app X\ X\

  Control of Mavericks:

  sudo/Applications/Install\ OS\ Mavericks.app/Contents/Resources/createinstallmedia--volume/Volumes/MyVolume--applicationpath/Applications/Install\ OS\ Mavericks.app X\ X\

  Press RETURN. You will be asked your admin password. It won't echo on the Terminal window. Press RETURN again. Wait for the prompt to the Terminal, meaning that the process is complete. It takes a while to complete. Be patient.

• What is the largest size SSHD I can put in my Macbook Pro 2015?

  I have a model early 2015 MacBook Pro 13 w/retina with 8 GB of RAM with a 128 SSHD.  I want to upgrade the SSHD and I have a few questions:

  1. What is the largest size that I can install it?

  2. how to re-install the operating system?

  Thanks in advance for your help...   I apologize if this question has already been asked, but I couldn't find the answers.

  Technically, SSHD refers to a drive of Fusion purchased in-store, with a rotating part (the hard drive) and a Solid State Drive, all in one package.

  I think you meant to ask about Solid State Drive or SSD. That's all that will fit in the MacBook pro 13 - in 2015.

  Line of OWC/Macsales Aura of "stick" form factor drives go up to about 1 TB at a price:

  5 https://eshop.MacSales.com/Shop/SSD/OWC/MacBook-Pro-Retina-Display/2013-2014-201

  .

• Satellite Pro 4600 - what is the maximum size of HARD drive?

  My age Satellite Pro 4600 has a 20 GB HARD drive. These are now very difficult to obtain, does anyone know if superior capacy HDDs can be used and, if so, what is the maximum size of the HARD drive.

  (Despite his age that I always use the Satellite Pro for some jobs).

  Hello John

  Satellite Pro 4600 is old enough for laptop and it is not easy to find the exact info. The fact is that this laptop comes with 10 and 20 GB hard drives.
  My opinion is that you can use 30 or even 40 GB HDD. I think that 30 GB new HARD drive should be enough for your some jobs.

  What do you think?

• Satellite M70 258: HDD upgrade question - what is the maximum size supported

  I need to upgrade the hard drive from my Toshiba Satellite M70-258.
  I would like to know what is the maximum size of the disk that I can install it.
  I would like to know if it is suportts Sata drives.

  Thank you in advance.

  Best regards

  Fernando Silva

  The problem is that there is no official information on the maximum size of HARD drive on laptop series different. If we can only speculate on the supported formats.

  But I found it here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=93195𖰋

  The user has updated the own M70 with the 160 GB drive HARD Toshiba MK1637GSX and it works.
  So maybe this info helps a bit.

  Good bye

• HP 14-r025tx: what is the maximum size of hard drive I can replace my default one? &amp; other hard disk performance issue

  My default hard disk is almost full and I plan to update. What is the maximum size that this model could overcome? Very well is 2-3 to?

  Another question.

  I replaced my optical drive to a box with a 250 GB SSD HARD drive inside. I installed my new operating system here, and makes the default boot drive. The default value of HARD drive that comes with the laptop is my backup drive. This is configured by okay?

  or

  Do I have to put my SSD on the default HARD drive space and put my 2 to/3 TB harddrive on the caddy for maximum performance?

  Hello

  1. in theory, you can get 2 TB or TB but 1 TB has better peformance.

  2. you cannot boot from the caddy. My suggestion: use for normal Bay and 2 TB SSDS in the caddy. You both what you want.

  3. as (2) above.

  Kind regards.

• What is the maximum size of hard drive, which can be installed in a pavilion d4790y desktop computer?

  What is the maximum size of hard drive, which can be installed in a desktop pavilion d4790y?

  It would be a secondary drive, not the boot drive.

  The operating system is Vista Home Premium, 32-bit.  The version of the BIOS is 5.08.

  Are there any changes or upgrades that would allow an internal hard drive 3 TB to install?

  Here are the specifications and configurable options for your desktop HP Pavilion d4790y and here are the specifications of its card mother P5BW - THE (Basswood2). Based on the specifications and the age of the computer, I would expect you to use a hard drive 3 TB as a secondary drive on Windows Vista (DISPLACEMENT SP1 or SP2) and Windows 7. Formatted as MBR would require the drive to use with a minimum of two partitions. Formatted as GPT would require only a single partition. In no case will you be able to use the 3 TB as a boot device drive because your computer does not support a UEFI BIOS that allows booting from a GPT formatted disk. No changes or updated should be held.

• What is the best size for the gigantic memory file pagefile.sys virtual?

  pagefile.sys is gigantic 8 GB of files in Windows 7, I want free space of HDD on my SSD for faster backup purposes, but I don't want to hinder the performance that comes first.

  I have 8 GB of DDR3 memory. What is the recommended size for the pagefile.sys for optimal performance?

  Tuesday, April 6, 2010 20:44:59 + 0000, EcoWhale.com wrote:

  > I wonder what would be the best size to choose for the performance as I have 8 GB of physical memory (assuming an SSD with a lot of space)?

  I recommend leaving it alone and let windows decide for himself,
  rather than make any custom setting. It works very well.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• What is the recommended size of repository to store saves the backups of ACS SNS-3415-K9, v5.4

  Hello guys, we need your advice :),

  do you know what is the recommended size of repository to store backups of logs of ACS SNS-3415-K9 (v5.4.0.46.0a software)?

  We intend to create an FTP server to record a monthly full backup and an incremental backup daily.

  We would like to consider the worst case in which ACS View Database is complete and a full backup is required and daily incremental backups.

  In the second period, we would appreciate really any advice on how to maintain, say, only the last 2 full backups and all the related incremental backups in the FTP server, is there a way to automate the removal of the oldest backup when a new backup is generated?

  Thanks in advance!

  Hi Rodrigo,

  Honestly, there is not a suggested size of space available to FTP/SFTP server used as the size of your backups of data base of progressive and complete view depend on 100% of the amount of newspapers ACS server receives every day, so what I would suggest to take a look at a couple of incremental for 2 consecutive days and would help you to determine what would be the amount that you need for a period of 30 days (one month).

  And associated with your concern if the ACS would supports the option to manually maintain the last 2 full backups view, unfortunately, it is not available as an option.

• BlackBerry smartphones, what is the maximum size MicroSD card that can be used in a 8310?

  I have browsed the positions and don't see it asked or answered.  What is the maximum size MicroSD card that can be used in a 8310?

  According to what your BlackBerry OS is tells you what size microSD card you can buy. You can check under Options | Topic (will appear as v4.xx.xxx). Look at the table on the following link to see what size you can get - http://www.blackberry.com/btsc/KB05461