What is the best way (maintaining the quality wise) for the material of the DVDs in PE9?

Similar Questions

• What is the best way to create a bookmark for a user to return?

  Hello to all... hello again Steve... I'm back with another question - what is the best way to set up a bookmark system so return users can pick up where they left off in a lesson of AW? I tried the usual internet research, always do, but a few samples and answers I found were AW5, not a lot of help...

  I have a dozen or so cards attached to my frame, I would like a user to return to the last card that he read before the close. (My AW communicates very well with database Access, so if passing a variable to access and back to AW when begins the lesson is on track, let me know...) If the answer here is too complicated, perhaps pushing me in the right direction and I'll me dive in.

  Thanks in advance to all those who have some tips, I really appreciate it!

  Terry

  Try this overview, see if it helps...

  Enter a reference to the map as you enter, then save to the database when you exit.

  You want something that will give you the equivalent of a page number - if you have 7 cards hung the setting, and the user is in the 6th plan when it stops, you want to save the number 6.

  There are dozens of ways to do it, but probably the easiest way is just to attach a calc to each card that has this code

  (I do not have Authorwar very convenient to check the syntax, then you should check out!)

  BookMarkPage = ChildIDtoNum (IconParent (IconID), IconID)<-- tells="" authorware="" to="" return="" the="" "page="" number"="" of="" the="" current="">

  Save BookMarkPage in your Access database to the exit.

  In return, read the bookmark in BookMarkPage, ask the user if he wants to go back to the bookmark. If so, use a calculated navigation that uses

  ChildNumToID (@the of your frame name or its ID, BookMarkPage)

  Note that you could argue something similar by recording the your card, the IconTitle or IconID but these two can break if never update you your file by adding or removing pages, renaming etc. With this method, all you need is a simple page County check that makes sure you don't try to nav for a page number that does not exist (use IconNumChildren).

  Steve

• What IS THE DVD BURNER DH 16ABLH double layer compatible

  I want to know if the DVD on my computer is compatible to playback and burning double layer?

  Hello

  It should be, but to verify, you can visualize all the multimedia capabilities of your optical drive using the free app at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• Best way to generate a PWM for a stint with LabView2010 and a laptop

  Hello

  as mentioned in the title, I'm looking for the best way to generate a PWM signal to a relay. I want to use a laptop computer and the LabView2010 for she. I have read through several topics, but after a time that he just got more confused. For example the NI USB-6008 OEM case seems to be a solutiion at low prices, but I don't know if I can use for the generation of PWM signals like this thread says is not possible:

  http://forums.NI.com/T5/Multifunction-DAQ/using-PWM-on-NI-6008/m-p/231860/highlight/true#M13339

  But then again this thread right here makes it seem as if it was doable:

  http://forums.NI.com/T5/Digital-I-O/generating-a-PWM-using-USB-6008/m-p/421654/highlight/true#M5527

  Once again in abbreviated form.

  What I need:

  -the best way to generate a PWM signal to control a relay

  What I have so far:

  -LabView2010

  -Laptop

  If possible, it would be good to have two channels for two separate signals, but it is more low importance right now.

  Hey Kambra,.

  The first thread you mention is correct, you can't make output PWM in any deterministic mode with a 6008. The 6008 is strictly software timed, which means that each digital writing that is done in the unit must go through the operating system and down to the device. And there is a lot of jitter of the involved BONE. The second article you mention says the same thing. They emphasized that they could reduce the jitter of some, but still can not remove it entirely. In the second thread, they mention using a M-series USB device do output PWM deterministic (timed material).

  The compromise really down to your application and its requirements. If your application to control the relay requires no determinism, then you can use the 6008. If you need precise control over the relay, try the USB M series.

• best way to specify a folder for a new virtual machine

  Hello

  I am currently working on a system that has the following file structure:

  DC1

  Prod

  Linux

  Windows

  Other

  Dev

  Linux

  Windows

  Other

  Beta

  Linux

  Windows

  Other

  What is the best way to specify a specific folder for a new virtual machine. At the Moment so I just say Linux it is said that there are several files with the same name. I discovered a way to get the good record, but it's very nearby. Any comments would be much appreciated.

  Kobus

  Perhaps the function in my folder through post might help?

• What is the best way to make http connection for my application can access internet on blackberry

  Hi I have crazy small application and create the regular http connection in my code.

  I m able to use internet in defining the apn but internet will not work in my application when I m using other equipment that required donot APN setting and work mobile without parameter APN there internet conection please let me know what setting that i could spend while creating the http connection so that my application work on all devices.

  Kind regards

  Navneet Gupta

  This can help you.

• Best way to optimize Windows 7 for the base image

  I know there are a couple of "official" guides out there for Windows 7, optimization, but how many of these guide people follow?  Can I get away with not doing all this?

  You have to do all this, that some items may not be appropriate for your environment.   I would go through the guide and do as much as possible.   There is also the tool from Microsoft that can help the optimization of

  http://blogs.technet.com/b/deploymentguys/archive/2010/08/31/Optimising-Windows-7-images-for-use-in-VDI.aspx

• What is your best way to center align two objects without moving one of them?

  I would greatly appreciate your advice.

  Use the align palette and define an object as a key object. Choose align to: and that is defined on the object key (if not already set)

  

  1. Select a group
  2. Shift click to add the next group to the selection
  3. then click on a group to set this as a key object (the sketch will turn into a "BOLD" since CS4 to mean is a key object)
  4. Choose alignment in the Align Panel

• Best way to parse a string for use in a lookup table?

  I am trying to create a system by which users can create a premade simulation and store simulations in order to easily load at their convenience. The way it works now is that when the user creates a simulation, information on the characteristics of the simulation are condensed down to a 12 string, which is written in a text file with the same name as its content. This string is then read, and ideally, I would have some sort of lookup table to convert characters in the information they have been condensed to. For example, a variable X can have possible values {650,720,851} who gets the mapping to {A, B, C} during the creation process. When loading, I would be able to send in a Sub C - VI and took her out in 851, group in a cluster. How can I perfectly realize this in LV? So far the best I have is this messy thing:

  

  Basically, who runs the string character by character and includes the appropriate value for the character at the given offset.

  You want to use the configuration VI palette.

  These screws makes it stupid simple save and load the values in the file by using Sections and keys.

  You can use the keys 'A', 'B' or 'C' and section 'X' to complete your example.

• Best way to index a table for display

  I often do something like this for indicators on a Panel, as you can see the block diagram is messy and it takes a lot of space.

  

  There must be a better way.

  You can also use auto-indexation with a structure in case of having a cleaner schema.

  

• What is the best way to have a form of request for a page web app that tells you what element of web application they watch?

  In previous old web apps, I used the see a scenario of a friend, even if it was not ideal, it did / still works for the most part elderly. It's a long time I don't remember putting it in place! What is the best way to make a request for information from the page now? Any help appreciated

  If you have a form on the detailed view of the web application, and you fill in the fields, lets say 'product name' with the actual tag name as the value of the entry. So who will automatically fill.

  Given that the user has no need to change it, you can even hide the field filled with his car.

• Best way to display a report of the hierarchy tree to APEX 4.2

  I have a hierarchical query spans four levels over two tables.  The application works very well and also includes columns hierarchical sum (i.e. the parent displays the sum of all children) using functions.

  I wonder what is the best way to view these data for users?

  At the moment I think I would have a collection now my connection with the edition special 'show' column.  Then I would include HTML to define values correct show/hide and refresh the report when you click on a node.  In my view, this would probably work, but may not be the best way.

  I disassembled my request for necessary columns (no column of the sum) and the tree APEX regions work well for this.  Y at - it a plugin alternative jquery or anything that people with what will give me the directory structure 4.2 native while allowing me to display additional columns with links?

  If I need to provide more info let me know!

  LSDev wrote:

  I'm going to use today to test these ideas, and if they don't work I'll go with the classic report hack, I thought.

  AEC: I'll try the plugin and report back on the question if I can get the links to work.

  The plugin code is clear and simple. However, the links generated HTML text in the query as:

  ...
  '' || apex_escape.html(ename) || '' employee
  ...
  

  does not work out of the box as the plug-in is escaping in HTML output column values:

      -- Render all other columns
      FOR j IN 3 .. l_value_list.count
      LOOP
        sys.htp.p('' || sys.htf.escape_sc(l_value_list(j)(i)) || '');
      END LOOP;
  

  This can be changed to allow the links:

    -- Render all other columns
      FOR j IN 3 .. l_value_list.count
      LOOP
       IF l_value_list(j)(i) not like '' || l_value_list(j)(i) || '');
      END LOOP;
  

• What is the procedure to turn off a MD3000i?

  What is good/best way to take a MD3000i offline for a power failure?

  Once guests are stop is a stop command that I'm missing in the Storage Manager?

  Or does it just turned off via the power switches.

  
  

• Best way to keep a list and a synchronized SimpleListProperty

  Hello
  What is the best way to (i. e. - for the moment work) to keep my 'plain' list and JFX SimpleListPropertry synchronized? Currently, I think something like that, but I'm sure that there is a better way:

  public class MyEntity {
      private List<String> myList=new ArrayList<>();
  
      // getters and setters
      public List<String> getMyList() {
          return myList;
      }
      public void setMyList(List<String> myList) {
          this.myList = myList;
      } 
  }
  
  
  
  
  
  public class MyEntityJFX {
      private MyEntity backer=new MyEntity();
      private SimpleListProperty<String> myList=new SimpleListProperty<>(FXCollections.observableList(new ArrayList<String>()));
  
      
      
      
      //Constructors
      public MyEntityJFX() {
          this.bindToBacker();
      }
  
      public MyEntityJFX(MyEntity backer) {
          
          //backer attribute checking logic ommited... 
          this.backer=backer;
          
          //filling the SimpleListProperty
          if(backer.getMyList()!=null && !backer.getMyList().isEmpty())
          {
              for(String s : backer.getMyList())
              {
                  this.myList.add(s);
              }
          }
          this.bindToBacker();
      }
      
      
      
      
      //Service methods
      /**
       * Synchronizes JFX properties' values with backer's
       */
      private void bindToBacker()
      {
          this.myList.addListener(new ListChangeListener<Object>() {
  
              @Override
              public void onChanged(Change<? extends Object> c) {
                  //not sure if this is a good approach
                  //and what exactly to do here
              }
          });
      }
      
      
      
      
      //Getters and Setters
      public SimpleListProperty<String> myListProperty()
      {
          return this.myList;
      }
      
      public final List<String> getMyList()
      {
          return this.myList.get();
      }
      
      public final void setMyList(List<String>myList)
      {
          //don't like this at all
          this.myList.clear();
          if(!myList.isEmpty())
          {
              for(String s : myList)
              {
                  this.myList.add(s);
              }
          }
      }
  }

  Use Bindings.bindContent (list, observableList)

• What is the best way to make a PDF file several Photoshop images, while maintaining editable layers?

  What is the best way to make a PDF file several Photoshop images, while retaining the layers in editable for later use mode? I tried to do in Acrobat, but it does not keep separate layers. I also tried to automate the PDF presentation in Photoshop, but it combines the layers as well. I need to enable layers from photoshop retain their ability to be edited.

  It is not possible at this time, Photoshop is not a page layout program and pdf is hardly a format suitable to hold several files psd layered or editable page layouts.

  Why would you do that anyway?