What is the best way to correct this image

I know a few ways to fix an image through the levels, histogram, brightness/contrast etc.. I have several of these photos and I want to just do a basic setup. What would you suggest for a simple correction. They must be perfect right now. I just want to get on facebook

Thank you

Mike

For a fixed fast and comprehensive to put you in the neighborhood of local correction:

Choose curves and click on the highlight eyedropper and choose white collar in the lower right.

(Pipette has the RGB value of 247 each.)

Go to Hue/Saturation and adjustment indicated here.

Tags: Photoshop

Question

What is the best way to detect that the text typed by the user (or added programmatically) exceeds the available space container and find where the truncated part begins? There are others (as described below) highlights the easy way to detect or to prohibit controllers to receive more characters that can be displayed in the area of publication given?

My attempt partially (Simplified)

For example, lets say I have a textflow editable with joints two instances of ContainerController.

var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
    firstController = new ContainerController(firstSprite, 100, 30),
    lastController = new ContainerController(secondSprite, 600, 30);


flow.interactionManager = new EditManager(new UndoManager());
flow.flowComposer.addController(firstController);
flow.flowComposer.addController(lastController);

flow.flowComposer.updateAllControllers();

Vertical scroll policy enabled I can compare the height of the composition in the last controller with the height of the content:

var bounds:Rectangle = lastController.getContentBounds(),
    overflow:Boolean =  lastController.compositionHeight < bounds.height;

trace('Content does not fit into given area?', overflow)

But when I change of vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF)-Unfortunately this does not work anymore... (In my case scroll must be disabled, since the text boxes can have only one line with narrow width)

Use cases

I want to create the form to fill out. Field can have one or more lines. A field could start in the middle of the page, continue in the following line, where it spreads throughout the page and put an end to the third line - long quarter of the width of the page. Text typed by the user may not exceed given the region since it could cover some static text that is located just after in below field.

Something like ascii image below:

--------------------------------------------
|                <PAGE>                    |
|                                          |
|                                          |
|                                          |
|               [Field starts here........ |  
| ........................................ |
| ........................................ |
| Ends here..]                             |
|                                          |
|                                          |
| [Another field] xxxx  xxxx xxxxxxxx x xx |
| xxxxxxxxxxxxxxxxxxx                      |
|                                          |
|                              [One more.. |
| .....]                                   |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
--------------------------------------------

Info:

 [......]  <-- form fields starts with '[' character, and ends with ']'
 xxx       <-- sample, static text
 | and _   <-- page borders

If you want to detect the overflow in the final container, there is another thread discussed before.

http://forums.Adobe.com/thread/795264

You can detect it with lastContainerController.absoluteStart + lastContainerController.textLength «»<>

What is the best way to achieve this?

What is the best to do the following?
Form1 lists items that have a cost value
Form2 is a form of invoice
What is the best way to export goods of a value of cost of form1 to form2?
A user would be making selections of point in form1 and save the form, and then send it or export data.
Then form2 would retrieve the selections point of form1 and display cost values that I can sum up at the end of the form2.
Thanks in advance for any advice!

Hello

If both forms have the same objects to the items and the same names, then export to xml of form1 and import of xml in form2 should work.

Data in the xml file that does not match the names of the objects to form2 will be ignored.

In both forms, objects that you want to export/import must have their liaison, the normal/name of the object value > Bindings tab.

Niall

What is the best way to correct the registry errors without the use of a registry cleaner in XP?

I am sorry to raise this issue that so many people who have asked me. I read pages and pages of discussions on the MS forum on this subject, and without exception, all the experts said Microsoft registry cleaners are completely unnecessary and that junk in the registers has no performance impact at all. Instead, they say, to do x, y and z. I am running Windows XP on my desk for five years, and gradually, he got so slow it's almost unbearable. It takes 10-15 minutes just to start, and sometimes it takes 2 minutes or more just to open a window of browser (IE8) or go to the previous page by using the arrow to the left. Before you tell me all the things it could be, please let me say that:

1. my PC has not always been this slow! It is getting worse.

2. all my Windows software is up to date. I have automatic updates on.

3. I have a lot of disk space, almost 75% of free space on a hard drive of 80 GB.

4. my PC is free of viruses, spyware and Trojans. I have McAfee antivirus running and I also sometimes run Malwarebytes and Trojan Killer, because they always find things that don't have McAfee.

5. I defragment my hard drive on a regular basis.

6. I regularly delete all my temporary files by using the Windows Disk Cleanup utility.

7. I have very little, if any "Add-ons". No toolbar Yahoo or Google (or Bing!).

8. I removed nearly every program that I start, so that they are not running in the background.

9. I uninstalled all the programs that I don't use.

However, I still have a slow ever-more computer. Sometimes, when I see ads on TV to increase the speed of my PC, I download the 'free' software, and they claim to find hundreds or thousands of "registry errors. When I look at the newspapers, I see many entries in registry for 'Netscape' and 'Google Earth', which I uninstalled years ago, as well as entries for the videos that I downloaded, seen once, and deleted a long time ago.

So, what's the problem? If it's not related to my registry (which Trojan Killer says has more 6 000 entries!), what else could be? I would appreciate greatly any advice you can give, because there are dozens of companies on their touting their registry cleaners and the uninstall (for a price) programs, and after reading reviews of the MS MVPs, I'm skeptical of their claims. Thank you. :)

I can't disagree with a lot of things have already been said.

I'm willing to accept that your machine does actually takes 10 to 15 minutes on the clock. It's completely absurd.

Some people call your "Windows Rot" problem. Becomes just the slower windows over time. It is a collection of things that are happening in the background. Yes I believe that the register contributes. Using a registry cleaner is not a "magic" solution But it can help a little.

The PC care program/process you described is above average. I suggest you add CCleaner. Disk Cleanup is not bad, CCleaner is better, cleaning of other stuff which does not resemble the DC. It won't be a significant difference because disk space is not your problem, but it will help a little.

'Play' with the registry is VERY risky. If you decide to go ahead, I would say that first make you a copy of the full image backup using a utility that can be started and run from a CD/DVD. Just in case the registry cleaner breaks of your machine.

Registry cleaners is that they take a "best estimate" to what is no longer necessary. Sometimes they think wrong. And each vacuum cleaner will clean slightly different sets of places. If the tool does not provide a way to back up the registry before you start cleaning, do not use it. He is not careful enough.

If vacuuming offer 'levels' of cleaning, enjoy. Open for more aggressive cleaning, with resetting and long series of normal use between cleanings.

You are looking for a tool which also makes registry "defragmentation". The registry is a database that get disorganized by additions and deletions. Defragmentation will be re - organize and get rid of a 'lost' space, making it the smallest file, afterwards faster to read. It is not something you need to do frequently, but since you've never done it in 5 years, it would help, after cleaning registry.

Another place to find CPU and RAM wasted resources is Windows Services. These are small programs that start at boot time. They run in the background and provide support services to all applications or specific applications. Many applications services are running even though you don't really need them. You can find information on which you can set by Googling for 'Windows XP hardening'. There are a lot of sites with good information. They call it hardening because by disabling unnecessary stuff, you leave less possible openings for the "bad guys" to the attack.

Ultimately, I think your best bet will simply bite the bullet and re - install windows and all your applications. It's the best way to restore your computer to almost any performance fees factory. (It is not exactly factory fresh because you need to add a ton of Windows updates).

Before you re-install, do copy image 1 or more full backups. At least one must be done using a tool that will easily allow you to extract the files. You data backup files separately to make it easier to restore the reinstallation. IE, copy it to a USB key.

Many "experts" actually expect to, and do, re - install windows every 6-12 months! I think it's a bit exaggerated, but they swear by it.

Once you do your re - install, create a copy of the magnified image
Install a firewall application (before the windows updates)
Once you do all updates of windows, create a copy of the magnified image
After that you re-install all your apps, create another copy of the complete picture.

In this way, in the future, you have more current points to restore your computer to. It will reduce the time you spend to get back to the current configuration.

On a 5 year old XP machine, you have probably 512 MB - 1 GB of RAM. You might also consider taking in the shop (or DIY) and bump the RAM up to at least 2 GB or better still max out. The current versions of the applications use much more memory than they did 5 years ago. Even XP will be since he has been seriously corrected since then.

I replace a website done previously before Page with a new site that I built in Dreamweaver, but wants to keep the URL address, what is the best way to achieve this?

I replace a site is at the top with a new website that I'm building in Dreamweaver, but want to keep the same URL which is the best way to go about this?

If you want to keep the same hosting provider, you have nothing to do. Just delete the old files of the site and download your new.

What is the best way to change this program and to read 1 sample of each channel?

The initial program was conducted with NOR-traditional DAQ. I change it to DAQmx the best I could. The program, he is already the application of voltage to generate code (Daqmx Write.vi). But I have problems with the acquisition of tensions, give me readings rare (Daqmx Read.vi) I don't know if I have to make a (Daqmx start Task.vi) for each channel in the program or if I can make it work with a single. Notice I have no significant changes a lot because this program is already running in another lab, and they send us the program so we had no problems so much but rather than get the BNC-2090, they got the BNC-2090 is who uses DAQmx instead of the traditional. If anyone can help?

A BNC-2090 is just a connection block. It has no effect on the question of whether you should use traditional DAQ or DAQmx. Which is determined by the DAQ card that you are connected to the terminal block too.

You can refer to this document, differences between the BNC-2090 and connector BNC-2090 blocks has, but it's just saying to change the label of the Terminal Board to reflect the new DAQ cards.

What problems are you having with the new VI you just posted? You get an erro rmessage? I don't know what mean "rare readings.

You really shoud look at some cases DAQmx in the finder of the example. Some problems that you are experiencing, is that your blocks of data acquisition are all kinds of disconnected. Generally, you should connect the purple wire from your work function of creation, through the beginning, reading or writing, then the narrow task. Many of your data acquisition functions are sitting there on the small islands now. You should also connect to your son for the error.

With DAQmx, you should be combining all your analogue channels in a single task. It should resemble Dev0/AI0... AI7. Then use a sample of channel 1 N DAQmx read to get an array of the readings, you can then use array of index to break.

Other things you need to do is to replace the structures sequence stacked with flat sequence structures. Turn on automatic growth for some of your structures such as loops. At the end of the day, you might find, you can eliminate some of the structures of the sequence.

What is the best way to get this layout of the chapter?

I have a document which is now a large flow of pages.
However, there are "chapters, in this 'book'. A 'chapter' actually starts on the right page. But I want the left page to participate in the design of the spread of the beginning 'chapter '. This means that left before the start page real "chapter" is reserved in control of layout and all "chapter" before that would end on a left page, needs a right-hand page empty inserted, after which the left page of the early-'chapter' spread follows.
Now, I can do the pages on the left of the start "chapter" start a section and to correct even a page number. That it is positioned on the left side. But when I add pages from the previous section, this means I have to change the page numbers of the beginning of all the sections that follow hand.
Are there not a better way to do this? Somehow I don't have to worry about the numbering of the pages myself while still getting the page before the "chapter" included in the section of this "chapter"?
(I write "chapter" because these aren't chpaters Id in an Id book, but a few sections in a single document Id).

If the previous "chapter ends with a page of pairs (left hand), you add two pages, if it ends on the right add you a..

Another way to do this automatically is to set an Option to keep on the paragraph style that you use for the first paragraph on the page at beginning of chapter, then it will start the section on the next odd-numbered page.

What is the best way to perform this batch export operation

Hello
I could use some pointers on the next task before I have stark wasting a lot of time to go in the wrong direction:
I have about 1000 records, each of them containing a .psd file I need to export a single group in .png in 4 different resolutions.
4 different resolutions must be named correctly as well as the name of the group in photoshop, for example the group 'Cup of tea' will result in exports in 4 resolutions named 'teacup1.png', 'teacup2.png', 'teacup3.png', 'teacup4.png '.

No indication on how to proceed in the most effective way is much appreciated
Cheers, Moritz

You might look into Dr. Russell Brown Image Processor Pro

You can also try to combine your own Action with the batch or Image Processor scripts

Try to line up and the image of the product turn to all air essentially uniform - what is the best way to do this in a jackpot?

Hi all

I recently did a photo shoot with about 150 different, but very similar products on a white background totally blown away. Each is turned a little differently and positioned slightly differently than others. I want all upward line them in the same place on the chassis so that when you view a catalog online page they appear uniform.

What I come up with so far is to bring them into a photoshop file stacked in the layer, then slide guides where each corner should be (they are roughly square, but turned to a sort of diamond) and adjust each layer and turn to adjust. Subsequently I toggle visibility on each layer and save it in JPG format.

Any thoughts on a better process? I have the creative suite together to work with.

Thank you!

Without some of the images to test, the following is offered as a possible solution that spin, align and Center the image. It's the strategy:

Write an Action that will be:

1. open the file and garbage of the lock.

2 Cmd + click click the new layer in the layers panel to place a layer underneath the product.

3. return to the upper layer and double-click it in the layers panel to bring up the layer Style.

4. in the section mixture if at the bottom of layer Style, move left until that disappears white blown in the illustration the high gray-scale slider to the right page. (It will be the same for all).

5 layer > merge down (image precision silhouette is now a single layer and has a transparent border)

6 file > Automate > Crop and straighten photos (since the skin is transparent, it will turn the picture. Selection not required).

7. save the file

Then:

Load files into a pile

Choose all layers

Select the Options toolbar move and align on the center vertical and horizontal (or low) of each image

Save layers as files

What is the best way to correct this image

Similar Questions

Question

My attempt partially (Simplified)

Use cases

Maybe you are looking for