What is the best way to identify corresponding ctrl/indctr an orphan of the label?

Similar Questions

• Best way to AutoResize resize fonts to text/etc on container label?

  I looked around, but I can't really find any proper code for this.

  What is the best way to resize a text field or label police to integrate into its container after resizing the container? that is a container is made smaller, and if the font size is too large, it makes the text field too big for its container it resizes until he goes.

  Here is the code I have in place now: -.

  <mx:Canvas width="100%" height="100%" resize="">
  
  
  <mx:Text id="mytext" width="100%" height="100%" text="{data.label}"/>                                  
  
  
  </mx:Canvas>
  
  
  
  

  Hello

  You can access the canvas width and height as below:

  Best regards

  Pablo Souza

• Best way to identify the members of old / unused

  Hi all
  
  We had our planning application for almost 4 years now and to keep it nice and thin that we are eager to do a review of our dimensions and remove all members that have not been used in the last 2 years.
  
  I was wondering if there are ways recommended on the identification of members which have not been used in the last 2 years?
  
  Currently the only way us can think must either make a MDX query or a Smart View to the list of members who have no 2010 YearTotal amount, but creates the risk of kidnapping
  (1) members who come to be created
  (2) members who have some movement in the year but the total zero
  
  Any suggestions?
  
  Published by: PLIM on January 30, 2013 08:37 - clarify

  I would say that you should use sql to understand this.

  Take the export of data and load it into a table.
  Compare distinct members in your table in outline.
  Who is not export, but is in need of major lines to remove.

  For someone who is handmade to SQL, must be like a couple of hours.

• What is your best way to center align two objects without moving one of them?

  I would greatly appreciate your advice.

  Use the align palette and define an object as a key object. Choose align to: and that is defined on the object key (if not already set)

  

  1. Select a group
  2. Shift click to add the next group to the selection
  3. then click on a group to set this as a key object (the sketch will turn into a "BOLD" since CS4 to mean is a key object)
  4. Choose alignment in the Align Panel

• What is the procedure to turn off a MD3000i?

  What is good/best way to take a MD3000i offline for a power failure?

  Once guests are stop is a stop command that I'm missing in the Storage Manager?

  Or does it just turned off via the power switches.

  
  

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• What is the best way to get a customized version # from an ESXi host?

  Each quarter, we generate a sequence of updates (including patches and security scripts) which are performed manually on our 5.0 ESXi hosts. I don't have an internet connection and so I have to do it this way.  I would like to be able to identify the last quarterly update that has been run on the vCenter servers and/or Client VI.

  Right now, I think adding the quarter, example 1 Q 13 on the DCUI message, then help PowerCLI, vCenter to retrieve the message DCUI, crawled and paste the quarter in the field host Annotations on vCenter.

  Kind of ugly, but I cannot find a cool way to get data like this outside of the host.  I don't want to rely on my user manually set to nothing, for example the field of Annotations on vCenter that is also subject to errors.

  I really want something that can also be seen on the VI Client, too, as the annotations are only on vCenter.

  I have ideas about the best approach to tackle this problem.

  Thank you

  Not sure if this is the best way, but that's what I ended up doing.   It feels like there should be a better way.

  I've updated my quarterly script to add the version number at the bottom of the file, / etc/vmware/welcome, whenever it is run on an ESXi host (e.g. myScript version: v1.0 Date: 04June2013).  This file appears under the banner DCUI.

  Then, I wrote a script powerCLI to roughly the following:

  foreach ($vmHostObj in Get-VMHost-name *) {}

  # Get the full message of DCUI in/etc/vmware/welcome

  $msgObj = echo $vmHostObj | Get-VMHostAdvancedConfiguration-name Annotations.WelcomeMessage

  # Convert a hash of a string table welcome message

  $msgTxt = echo $msgObj.Item ("Annotations.WelcomeMessage")

  # find the clue for the string containing my script information, which is at the end of the welcome message.

  # This is important because the substring below function will extract everything after the index.

  $idx = $msgTxt.IndexOf ("version myScript :")

  If ($idx - gt 0) {}

  $label = $msgTxt.Substring ($idx)

  Set Annotation - remarks on the entity $vmHostObj - CustomAttribute - value $label

  }

  }

  This replaces the Notes field for each host, one day I can go back and make it more user-friendly where it replaces the version leaving the rest of the field notes intact.

• What is the best way to move the data from the app and Server data structures?

  Hi guys,.
  
  I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?
  
  Thank you
  Kim

  There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

  I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

  You can use method datapump oracle too.

  If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)

• Which is the best way for a function called identify the class name of the appellant.

  Which is the best way for a function called identify the class name of the appellant.
  
  (1) sun.reflect.Reflection using the function call
  

                  Class caller = Reflection.getCallerClass(2);
                  System.out.println("Caller Class Name ::"+caller.getName());

  Trace of function called battery 2) analysis of current threads

                  StackTraceElement[] stElements=Thread.currentThread().getStackTrace();
                  System.out.println("Caller Class Name ::"+stElements[3].getClassName());

  Y at - it all the other ways to achieve the same. What is the best way?
  Called function does accept no argument, I don't want the arguments of function calling function called t.
  
  Help, please.
  
  With greetings
  Paul

  798185 wrote:
  Which is the best way for a function called identify the class name of the appellant.

  Y at - it all the other ways to achieve the same.

  SecurityManager

      // 0 is the anonymous SecurityManager class
      // 1 is this class (also works in static context)
      // 2 is calling class
      static Class getClass(int i) {
          return new SecurityManager() {
              protected Class[] getClassContext() {
                  return super.getClassContext();
              }
          }.getClassContext();} 
  

• What is the best way to buy an iPhone Unlocked 7?

  Hi all

  I am currently using T-Mobile and want to get the new iPhone 7. Since there is no option for a sim-free iPhone, what is the best way to buy the new iPhone? Should I get the T-Mobile one full fare? I know that he will be released version but it will come with a T-Mobile sim so what will do with the sim card? Put it away or give it to T-Mobile? Or should I wait for the version without card sim to appear, which I don't think that will come out until November, and I don't want to wait that long.

  Thank you in advance.

  If you do not want to wait to pay full price for the model from T-Mobile.  You can do whatever you want with the SIM card.

• I'll do a clean install on a blank hard drive upgrade but want to keep my Firefox settings - what is the best way to do this?

  I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.

  Hello

  The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.

  Learn you more about the Firefox profile folder, how to backup and restore, here.

  I hope this helps, but if not, please come back here and we can look at in another option for you.

• What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  I have an iMac with a capacity to 1.11 - 679,49 GB available. With the software updated.

  Model name: I

  I have emails out of my different accounts in a "random" folder, but is not free up space. If I move an email in "Archives" and then it always remains in the e-mail account, apparently duplicate email in two places. "

  ERGO: the question is...

  What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  (I hope I've inserted which may be useful, but I'm not sure about that.)

  Thank you

  ilenefrombaltimore

  Archive messages or move them to some other local mailboxes or mailboxes on the server. Don't know what you are trying to do because it appears that you have 2/3 of your hard disk.

  Why do you think archiving emails in 2 places? Where are you trying to save space to?

• What is the best way to sync contacts with a host of webdav?

  I use Thunderbird and Contacts Android as of client applications with an owncloud 8 hosted remotely. I have activated the application Contacts on Owncloud and now I want to sync the contacts between these systems. What is the best way to do it?

  I try to get sorted first Thunderbird. I tried Addressbooks Synchronizer, but currently, it gives me a message telling me that my credentials are wrong or is sitting silently, do nothing. I am aware that it is a file synchronization, the method of synchronization not saved, so it is not ideal, in any case.

  Is there a better, good timing, method I can use? I refuse to the thing that he is an unreasonable request or that no one asked before me, but I can't seem to find the answer.

  Thanks, Martin

  WebDAV my initial reaction was sogo connector.
  These guys recommend the same http://kb.mozillazine.org/Sharing_address_books

  Here http://www.sogo.nu/english/downloads/frontends.html

• What is the best way to copy the 700 lots of e-mail files to a new computer?

  I'm moving my wife and an old (Thunderbird, Win XP) computer to a new computer (Thunderbird Win 7). It has about 700 local folders with thousands of emails in them. What is the best way to copy to the new computer?

  The easiest is just to copy the whole profile.

  Menu help > troubleshooting information

  Close Thunderbird

  In windows Explorer, select all and copy.
  just stick on a thumb or other portable media to read/write (not the CD or the DVD)

  on the new Machine to repeat the troubleshooting and close the steps to get the current profile folder

  This time all the portable media stick in the profile to replace what is there

  Open Thunderbird, your additions of e-mail contacts does it all

• What is the best way to retrieve deleted mp3 files? I am running OSX Leopard 10.5.8 on a PowerPC G5 tower. I'll be very grateful for any help in this matter. Thanks to Chris

  Hello

  What is the best way to retrieve deleted mp3 files? I had a lapse of attention and I deleted a folder containing most of my music files. It is for the most part, the mp3 but there was regular audio files and some wav files in there also. I am running OSX Leopard 10.5.8 on a PowerPC G5 tower. I have another PPC machine to help the recovery, if I need, but at the moment, he is not appearing on my network (3 computers). I'm trying to change this soon. I'll be really grateful for any help in this matter.

  Thanks to Chris

  If you emptied the Recycle Bin after you move the folder to the trash, and you don't have a time Machine or another backup, then it is lost, sorry.