What is the best way to my test app on Android devices?

Similar Questions

• What is the best way to test connection keys?

  I created several key connection for different rolse on a new site. When I select the key, it asks if I want to replace the existing connection, which I really don't want to do.
  
  What is the best way to manage this sort the administration login isn't affected?

  Also create a connection for you key Administrator role, so you can quickly return.

• What is the best way of reformatting my MacBook ssd for resale?

  I'm preparing my 2015 12 '' MacBook 1.3 GHz 512 for resale.  What is the best way to erase and reformat the SSD drive?

  Thanks in advance!

  -jag

  Before you sell or give away your computer, and more the steps listed in this article to support, please follow these steps:

  1. run the Diagnostics from Apple or the Apple Hardware Test. The buyer will do (or it should), and you won't be surprised by the results.

  2. reset the PRAM and the SMC, which may contain personal information.

  3. If you set a firmware password, remove it by running the utility in recovery mode firmware password.

  4. If you turn on FileVault in OS X 10.7 or later, turn it off.

  5. If you use Boot Camp, the partition must be deleted.

  6. If you have created another partition of data on internal disk, remove them in disk utility.

  7. If the machine has an internal hard drive, erase the remaining data partition with the possibility of putting the data to zero. An SSD has no need to be set to zero.

  8. remove the machine from your list of registered products. If it is still covered by an AppleCare Protection Plan, transfer the warranty to the new owner as described in the terms and Conditions AppleCare (under the heading "Transfer of Plan.")

  Note also:

  You can legally or transfer almost any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. This includes OS X, so if you've switched to OS X 10.7 or later, you need to reinstall an operating system older, either from the installation media, if any, or by commissioning in recovery mode of the Internet (option-command-R start ringing.)

  The new owner will have to re-download everything software that came on the App Store, as appropriate, including updates of OS X, under her Apple ID. If you never updated applications bundled iLife (iPhoto, iMovie and Garage Band) through the App Store, you can not transfer these either. The buyer must buy them. Note that iPhoto has been suspended and is no longer available for purchase.

• What is the best way to install XP on Vista Equium A100-338

  I want to install XP on my Equium A100-338, who has already installed Vista. What is the best way to do it, I heard a lot of bad luck stories trying to do!
  I do it only as a new software, with that I need to work only works on XP.

  Any help appreciated

  Thank you

  Hello

  In my opinion, you must install the XP operating system on the second partition.
  In this case, you can use the two BONES; Vista and XP.

  Using these two s OS has many advantages. For example, you can always test the Vista and the new Microsoft features that are available in Vista and, in addition, you can use the XP if you need to run some programs and applications that are not fully compatible with Vista.

  Then first ask how o create a second partition in Vista.
  Well, this can be done in disk management. Right-click on the my computer drive management made right click on the disk to manage and modify the size of the partition.
  Then the free space on the HARD drive can be activated, and you can create the new partition.

  Then simply boot from Win XP and install it on the second free partition.
  The Toshiba drivers needed should be downloaded from the Toshiba page.

  Good luck

• Programmatically update nested arrays of Clusters? (What is the best way?)

  I have an array of configuration files that is loaded at startup. Then, I need to update the values in this table of configuration values. The attached VI works, but I was wondering if this is the best way. It seems not scalable I added elements that I do need to update (mostly because the real configuration file has a lot more items).

  What is the best way to update an element of tables nested clusters?

  In this version shortened:

  When I click on "Set a new value" it should set the updated for the selected Config values #, # test, a subtest #.

  

  Back panel:

  

  Thank you!

  A better approach is to use the standard bundle/unbundle and the subset model table index table/replace. A component of Inplace Structure using simplified, as shown:

  

• What is the best way to save an array of objects and then load it?

  Hi, what is the best way to save and load an array of objects?

  I hade a code like that, but it does not work:

  var test = new Array();
  test.push(new Foo("a"));
  for (var i = 0; i < test.length; i++) {
      console.log(test[i]);
  }
  // save and load, then show again
  localStorage.setItem("test", test);
  var test2 = localStorage("test");
  for (var i = 0; i < test2.length; i++) {
      console.log(test2[i]);
  }
  

  the problem is, the first newspaper that get the things I want. The second time I get:

  Uncaught TypeError: Property 'localStorage' of object [object Object] is not a function
  

  The work around this problem is to stringify before saving and then analyze before loading.

  http://StackOverflow.com/a/2010948/773263

  Although I said, it is better to use IndexDB.

• What is the best way to configure the Cisco IOS password?

  I'm under 15.2 (4) IOS on a router in 1921

  What is the best way to set up the password of the router?  I already tried once and managed to block me on another switch.  I would use the most secure method that encrypts the password.

  Current config:

  username admin privilege 15 password 0 cisco123

  Hey Kevin,

  Use the secret keyword instead of the password for the password more secure and encrypted.

  The syntax that you are using will display the password in clear text.

  R1 (config) #username, 0 privilege 15 password test
  R1 (config) #exi
  R1 #sh runn
  * 00:00:25.523 Mar 1: % SYS-5-CONFIG_I: configured from console by console
  R1 #sh runn | in test
  username password 0 privilege 15 test
  R1 #.

  If you use the keyword secret then it will get encrypted.

  R1 #sh runn | in test1
  username privilege 15 secret 5 test1 $1$ PV6g$ sGMYxxmW8hD9Cdy7TsmHF0
  R1 #.

  Concerning

  Knockaert

• What is the best way for foglight consume a webservice

  I hope that this is has not been replied that a bazillion times and if it is please send me the link I'm open to that.  What is the best way for foglight consume a Web service and respond with an alarm if the response from the Web service is not what is expexted.

  for example, calls Foglight webservice to acme.com/areuup and he responds with correct status in json format process.  If it does agree return, then foglight must send alerts to correct individuals.

  Thank you

  Kaleb

  in the end, we have used a perl script to capture the webservice and treat it and tables configuration.  Here is what has been written and created an agent custom.

  I apologize to all those who find the bulky comments, but it's my edition of journal of the script. I removed the comments once the script has been published and used.

  ===

  #! / usr/bin/perl

  #############################################################

  # Author: Kaleb J. Albee

  # Depandancies: SOA webservice

  # Engineers: Marc and Manu

  # Date: 28/02/2013 perl: (v5.14.2) built for x86_64-linux-gnu-thread-multi

  # Operating system: Linux 3.2.0 - 29-generic eam-ops-test #46 - Ubuntu SMP Wed Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  #############################################################

  use strict;

  use warnings;

  use Try::Tiny;

  use SOAP::Lite;

  use SOAP::WSDL;

  Use Time::Local;

  My = @soaenvs ('BSE - dev', 'BSE test', 'BSE-scene', 'BSE');

  # parameters: $_ [0] receives a call of SOAP client object.

  #

  void toStr {return $_ [0] == 1?} 'up': 'down' ;}

  void getBusResults {}

  # $_ [0] will be the $client spent

  # create a different buses SOAP connection.

  my $result = $_ [0]-> (getMessagingEngineHealth)

  # arg0 is used to set the setting for what is expected on the soa web service.

  SOAP::Data-> name (arg0 => $_ [1]));

  # $_ [1] will be the bus happened in

  return (Lk ($result) "started" eq? 1: 0);

  #return $result;

  }

  # Start sampling.

  My $curTimeStamp = "";

  my $count = 0;

  Print "LdsEsbBusHealth5\nSTART_SAMPLE_PERIOD\n TABLE";

  foreach my {$soae (@soaenvs)

  my $client is SOAP::Lite-> service ("put the url of the webservice here.");.

  $count ++;

  # create an object to inspect objects. My $insp = Data new::Inspect->; Download the time stamp for this.

  my ($sec, $min, $hr, $day, $mon, $year) = localtime;

  # format the year correctly for useage.

  My $curyear = 1900 + $year;

  # the hand to the fglam agent fields at the tables.

  My $soacei = getBusResults ($client, "messaging.000 - CEI.esb.BUS");

  My $soaapp = getBusResults ($client, "messaging.000 - SCA.APPLICATION.esb.Bus");

  My $soasys = getBusResults ($client, "messaging.000 - SCA.SYSTEM.esb.Bus");

  $curTimeStamp = ' $curyear$ MON$ day$ hr$ min$ s ";

  Print "SoaEnv.String.id=$soae\n";

  Print "CeiBusNum = $soacei\n";

  Print "AppBusNum = $soaapp\n";

  Print "SysBusNum = $soasys\n";

  Print "CeiBusStr.StringObservation.obs =". toStr ($soacei). "\n";

  Print "AppBusStr.StringObservation.obs =". toStr ($soaapp). "\n";

  Print "SysBusStr.StringObservation.obs =". toStr ($soasys). "\n";

  Print "Daterun.StringObservation.obs=$curTimeStamp\n";

  If ($count<=>

  Print ("NEXT_SAMPLE\n");

  }

  } {$soae foreach (@soaenvs) #.

  Print "END_TABLE\n";

  Exit 0;

  ===

  I hope this helps someone out there!

  Bravo!

• What is the best way to migrate from forms to ADF?

  We are in a big mess. Our company has been developing Oracle Forms for more than 15 years. We have applications developed in Forms 6i and 10 g. We have about 5 products and these 5 products have different versions of 25 to 30. that is, we maintain about 30 different versions of our applications. Each version of the application has about 100 forms and 100 States.
  
  Now, given that the forms came at the end of life of 11 g we want to pass to the ADF. We tried forms of ADF migration tools but failed. So now, we decided to manually to rewrite applications in the ADF.
  
  Our forms / PL/SQL developers, designers and analysts (about 40 in total) are all people of Oracle Forms. They have no experience in Java.
  
  What I want to know is:
  (1) what is the BEST way to do this?
  (2) need to learn Java, JSF, and ADF? (i.e. every 3)?
  (3) it is mandatory to learn JSF?
  (4) assuming that may benefit from a full training, how much time will it take for people of forms learn the ADF?
  (5) what kind of training will be necessary? (Java, JSF, ADF and JDeveloper etc..)
  (6) how LONG will take? that is to train all 40, then to rewrite an application forms 100 + 100 + reports? (Ballpark is OK).
  (7) any other technology we should learn?
  
  Published by: user12240205 on July 18, 2012 05:48

  Obvoiusly liked you training the better, but I think the minimum would

  (1) Java skills - I think to start, 1 or two days read some thing like head first Java http://www.amazon.com/Head-First-Java-Kathy-Sierra/dp/0596009208
  (2) I would then get the http://www.amazon.com/Quick-Start-Oracle-Fusion-Development/dp/0071744282/ref=sr_1_1?s=books&ie=UTF8&qid=1343201618&sr=1-1&keywords=jdeveloper+quick of "The Quick Start Guide to Fusion Development" (declaration: I am the author so have an interest, but I still think it's a good point of departure - this should be about 2-3 days to read and also to try things.)
  (3) in parallel I would observe these http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html#a1 ADF Insider Basics - a few hours
  (4) I'd so try this tutorial http://www.oracle.com/webfolder/technetwork/tutorials/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm - 3 hours.
  (5) if necessary, if you come from a background of forms I would also read http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/SummitADF/SummitADF_Redevelopment.pdf and watch http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/Forms_Redevelopment_ADF/Forms_Redevelopment_ADF.html - which is about 2 hours of work.

  I think it would be the absolute MINIMUM at least be able to build basic applications and begin to feel your way all also described in the http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADFTour/ADFTour.html 'ADF COLLATERAL TOUR' could be shot as you start to build a proof of concept. However, I would say don't you try to build a real application with a single exposure of weeks (in the same way, I don't expect you to design a database of product with the formation of a week only). I would probably expect your developers to have at least the above training, then spend a month or so evidence of (minimum) building of the concepts (or test themselves with the ADF Insider Essentials tasks). In addition, I would probably expect to have at least a senior developer/architect, with much more experience that may be decisions on things like reuse, partitioning, architecture, etc..

  Of course, it's all subjective, but I hope it helps.
  concerning
  Grant

  PS
  Of course, we also have lectures for university training Oracle which you could attend (or they can be bought to watch online).

• What is the best way to cause a VM enter the pending state question?

  I work for a small company that makes a product that allows for the management of Virtual Infrastructure of a SmartPhone (BlackBerry, iPhone, Android etc.) and I want to test our feature that allows you to answer questions VM. But I can't find an easy way to get a virtual machine with a question! Then...

  What is the best way to cause a VM enter a State of "pending issue"? We have vms (200 x, XP) windows and some linux vms.

  Thank you!

  fly to roveit.com

  The easiest way is to copy a virtual machine and it associated the file and when you move it over a data store different and you just update the descriptor entries + VMDK file VMX, one thing people forget to do is also updating uuid.location that refers to the data UUID store. When you try to turn on the virtual machine, you will always have a question asking if you want to

  (1) cancel

  (2) I_moved it

  (3) I_copied it

  Now to replicate this and always get it without copying files is quite simple and takes< 1min.="" create="" a="" dummy="" vm,="" call="" it="" whatever="" and="" you="" don't="" even="" need="" to="" allocate="" much="" space,="" 1gb="" thin="" will="" do.="" you'll="" then="" want="" to="" unregister="" the="" vm,="" right="" click="" and="" remove="" from="" inventory,="" don't="" delete.="" now,="" you'll="" need="" console="" access="" to="" the="" vm's="" .vmx="" file,="" use="" either="" the="" classic="" esx="" service="" console="" or="" unsupported="" busybox="" console.="" if="" you="" have="" access="" to="" neither,="" then="" you="" can="" use="" the="" datastore="" browser="" to="" download="" the="" .vmx="" and="" make="" your="" changes="" and="">

  I'll assume you have console access, go to the data store where the configuration of the virtual machine is stored. Edit the file and look for the entry "uuid.location" and simply change the first two numbers to do anything, say 11 and then save the file. Now return to the store of data browser and re - register your virtual machine, your VM should now appear once again and then try to turn on the virtual computer. If everything was done correctly, you will get a question arises for the virtual machine and it will not until he said.

  You can probably even write a shell script that will copy a backup .vmx file and re-save to automate this process as you write your script/program.

  =========================================================================

  William Lam

  VMware vExpert 2009

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• What is the best way to support the retina screens?

  Hello

  I've done recently for my custom panel UI code only, but my retina users report that everything is still pixelated (I did have the chance to find a machine of the retina to test yet myself). I had hoped to make the user interface in the code would make it works naturally, but appears not to be the case.

  In this research, I stumbled upon the users of mobile applications using FlexGlobals.topLevelApplication.applicationDPI together a target DPI, but appears not to exist in the CS Flex SDK 3.4.0 (which seems to be something Flex 4).

  What is the best way to support the retina display for my Panel? As far as I know, Flex 4 does not work with the CSXS library.

  Thank you

  Cameron

  Looks like there is no way for you to do this in Control Panel. We need to update some components to be HiDPI aware first. Stay tuned...

• What is the best way to buy an iPhone Unlocked 7?

  Hi all

  I am currently using T-Mobile and want to get the new iPhone 7. Since there is no option for a sim-free iPhone, what is the best way to buy the new iPhone? Should I get the T-Mobile one full fare? I know that he will be released version but it will come with a T-Mobile sim so what will do with the sim card? Put it away or give it to T-Mobile? Or should I wait for the version without card sim to appear, which I don't think that will come out until November, and I don't want to wait that long.

  Thank you in advance.

  If you do not want to wait to pay full price for the model from T-Mobile.  You can do whatever you want with the SIM card.

• I'll do a clean install on a blank hard drive upgrade but want to keep my Firefox settings - what is the best way to do this?

  I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.

  Hello

  The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.

  Learn you more about the Firefox profile folder, how to backup and restore, here.

  I hope this helps, but if not, please come back here and we can look at in another option for you.

• What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  I have an iMac with a capacity to 1.11 - 679,49 GB available. With the software updated.

  Model name: I

  I have emails out of my different accounts in a "random" folder, but is not free up space. If I move an email in "Archives" and then it always remains in the e-mail account, apparently duplicate email in two places. "

  ERGO: the question is...

  What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  (I hope I've inserted which may be useful, but I'm not sure about that.)

  Thank you

  ilenefrombaltimore

  Archive messages or move them to some other local mailboxes or mailboxes on the server. Don't know what you are trying to do because it appears that you have 2/3 of your hard disk.

  Why do you think archiving emails in 2 places? Where are you trying to save space to?

• What is the best way to sync contacts with a host of webdav?

  I use Thunderbird and Contacts Android as of client applications with an owncloud 8 hosted remotely. I have activated the application Contacts on Owncloud and now I want to sync the contacts between these systems. What is the best way to do it?

  I try to get sorted first Thunderbird. I tried Addressbooks Synchronizer, but currently, it gives me a message telling me that my credentials are wrong or is sitting silently, do nothing. I am aware that it is a file synchronization, the method of synchronization not saved, so it is not ideal, in any case.

  Is there a better, good timing, method I can use? I refuse to the thing that he is an unreasonable request or that no one asked before me, but I can't seem to find the answer.

  Thanks, Martin

  WebDAV my initial reaction was sogo connector.
  These guys recommend the same http://kb.mozillazine.org/Sharing_address_books

  Here http://www.sogo.nu/english/downloads/frontends.html