What is the cause of my recent BSoD?

Similar Questions

• What are the causes of silverlight N8007 error code.

  What are the causes of silverlight code error N8007?  I have already been able to view the contents of netflicks, but no more.  He has always played by this "Silverlite" program or a recent change?

  Thaks in advance for your answer.

  Hi GaryFelder,
   
  Post your request in the Silverlight forums for assistance on this issue.
   
  Visit the following link to do the same thing:
  http://forums.Silverlight.NET/

• Device: usb fax modem; fatal error, what is the cause of the problem?

  using my usb modem-fax, the result is fatal error, the response of the device that I can't send your fax due to an unexpected error, pls help.

  I already installed and installed the device, remove and installed gain but the problem still there, pls help.tnx

  Duplicate the content of the Post-

  USB FAX MODEM FAIL TO PERFORM

  'THE FAX CANNOT BE SENT BECAUSE OF AN UNEXPECTED ERROR' IT IS THE MODEM ANSWER AFTER DIALING THE NUMBER, BUT BEFORE IT WAS OK, PLS TELL WHAT IS THE CAUSE OF THE PROBLEM AND TO SOLVE IT, TNX

  Hello

  
  1. What is the error code when printing / fax fails?
  
  2. What is the brand and model of Fax Modem?
  
  3. use an internal card for your fax and modem functions or an external modem?
  
  4. what was the recent change in hardware or software performed on the computer before the question?
  
  Please follow the links below to solve the problem.
  
  Method 1
  
  Check the compatibility of the device in the Windows 7 Compatibility Center.
  
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=fax%20modem%20&OS=32-bit
  
  Note: Check the categories of SOFTWARE and HARDWARE.
  Method 2
  
  Follow the links to help resolve the fax modem
  
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan
  
  Reference, the LEARN Section.
  
  Method 3
  
  Uninstall the program interface for Fax and reinstall it from the manufacturer's website.
  
  Run the uninstall program tool set up to help install questions.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Also follow the instrunctions from the link below.
   
  Solve fax problems

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

   

  Applies to Windows 7.
  I hope this helps.

• I get the A12E5 error when I try to install Lightroom 6. What is the cause?

  I get the A12E5 error when I try to install Lightroom 6. What is the cause?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  A12... Download & install error http://forums.adobe.com/thread/1289484

  -A12... discussion http://forums.adobe.com/thread/1045283?tstart=0

• What are the causes my screen to instantly display several small pages?

  What are the causes my screen to instantly display several small pages?

  Your username appears to be rather ironic.

  Given the richness of the information you provided, I guess, whatever the version of Pages that you use, you've opened the model selector.

  Peter

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• I can't click on the icons at the top of a site. What is the cause?

  I have firefox and is having a strange problem today. When I'm on facebook, I can't click on the icons at the top. I do not click on the message, friend notifications, location, profile icons and do not click on the one that allows to disconnect. So I can't log out yet. I mean do not click on it is when I put the cursor over these icons, it does not change in the finger. When I left click it in any case, nothing happens. This does not occur in internet explorer, but I want to continue to use firefox. What is the cause? I also noticed that this happens not just on facebook. I uninstalled and reinstalled firefox. I restarted the PC. It did not help.

  The extension of the Yahoo! toolbar reported that causes this problem.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Help! Screen pink when adding photos to the slideshow - what is the cause?

  There is a "glitch" pink screen that keeps appearing randomly in my iMovie on some photos project. No one knows what is the cause? It's incredibly frustrating. Sometimes it will not appear in the preview of iMovie and then when I export the .mov file, that is! See screenshot below for the Visual representation. ANY idea is appreciated. Thank you!

  

  Only iMovie 10.1.1 is completely compatible with El Capitan.  Are you by chance using an earlier version?

  Geoff.

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• When I close a program, it seems that the page is molten! What are the causes that

  Just as I said, when I close my Internet explore the page looks as it melts down.

  When I close the Office computer looks like it is melting.

  What are the causes and how can I fix what is wrong

  I ran mcafee and malware programs.

  I have compaq presario v5000

  Windows xp

  32 bit

  do not add ons running.

  I don't see how someone can offer you promising ideas knowing more about your system.  The best you can get is speculation on what might work sometimes maybe. All we seem to know is what sort of a Presario V5000 with XP (there are a lot of different V5000s).

  It worked better in Mode safe or clean boot?  Even if it did, this does not your problem, unless you want to run mode without failure or boot for the rest of your life.

  If you restored to the factory settings in the past, then you have all your video drivers updated?  Chances are good that everything that comes out of the plant is outdated when it leaves the factory.

  If I were you, I would first take a look at your specifications and make sure that your video drivers are up to date.

  Should be considered ditching of McAfee (since it's a famous memory and CPU hog) and replace it with something with a smaller footprint like Microsoft Security Essentials (MSE).  You can simply use the McAfee uninstaller install temporarily and see how things work... you can always reinstall later if you are forced to do it, right?  (but I wouldn't).

  If you still have the problem after all and the verification of your video drivers, check the properties of your system performance (especially the Visual effects) Options.

  Why don't you do this so that we can see what you have:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Windows closes programs as it is to melt! What are the causes that

  When I close an Office program looks like it's melting!  Even when I turned off the computer.  What are the causes that?

  Thank you

  Deb

  Hello arcand1772,

  Thank you for the question!

  It is disheartening to know that have problems you while closing programs. As I understand it encounter you problems during the closure of the programmes.

  1. the is the problem with a particular program?

  2. were there any changes (hardware or software) to the computer before the show?

  Post a screenshot of the issue to help you best.

  How i: post a screen shot on this forum? -Microsoft Answers

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• What are the causes videos stop and start again during the transmission?

  What are the causes videos stop and start again during the transmission?

  Hello

  You can update the latest drivers for the video card and check.

  Also perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Let us know the results.

• What are the causes my download folder keep freezing?

  I have windows XP on both computers and computers that keeps freezing of the download folder. When I open it it takes around one minute before the content of the record shows. then when it dose I can't scroll the page but only one line at a time, and I have to wait 30 to 60 seconds before it scrolls to the next row. a few times, this caused the failed computer. the reason why he gave the accident was a file system unresponsive and cause windows to become unstable.
  I noticed the file system named inches if I remove this file, download folder will start to act directly and freely, I can scroll the page, but in 30 to 60 seconds, thumbs back, when it dose the scrolling starts hang up again. There is also another system called desktop file. It doesn't seem to be at the origin of the problems, but its not always... If the file Thumbs is the cause. How do I keep it out of my download folder? It is perhaps not what is the cause. but I would like to solve this problem. its very aggravating.

  Hi Mokey Moke,
   
  This problem could be due to some virus or malware camoufalged himself as a folder inches.
   
  Use the Microsoft Safety Scanner and scan your computer to get rid of the virus or malware.
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.