Similar Questions

• What is the best size for the gigantic memory file pagefile.sys virtual?

  pagefile.sys is gigantic 8 GB of files in Windows 7, I want free space of HDD on my SSD for faster backup purposes, but I don't want to hinder the performance that comes first.

  I have 8 GB of DDR3 memory. What is the recommended size for the pagefile.sys for optimal performance?

  Tuesday, April 6, 2010 20:44:59 + 0000, EcoWhale.com wrote:

  > I wonder what would be the best size to choose for the performance as I have 8 GB of physical memory (assuming an SSD with a lot of space)?

  I recommend leaving it alone and let windows decide for himself,
  rather than make any custom setting. It works very well.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• What is the standard size for Web site?

  What is the standard size for a Web site? height x width

  I would like to create a Web site that is a good width and have the leangth develop if necessary depending on the content, which could increase in the future...

  Some sizes, I worked with in the past have been 760 x 360 (pixels) and 800 x 600 (height x width), but it was a while ago...

  As David says, it depends on your audience.

  Take a look at the stats of the site (if you have one at this point).  What kind of people are going to be viewing the site.  If it's a more technical audience, then they probably wide enough monitors, but it's a site of "mom & pop" type, so they can still use small monitors.

  These days, I went from 780 width (at a size of 800px wide window) to 980px width to meet the size of the window at 1024. With respect to height, not to declare a height at all.  This will allow the content to expand vertically as required, regardless of the size of the window.

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

  --------------------------------------------------

  http://Twitter.com/nadiap

• margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• What is the correct URL for the commercial intent tool?

  I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention.

  I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx

  I tried Microsoft and a google search...

  This tool still exist? And if so, where? What is the correct URL?

  Thanks for your help!

  This is the site for

  http://ADLAB.Microsoft.com/audience-intelligence.aspx

  But when I click on the online commercial intent tool, the page is not found.
  http://ADLAB.Microsoft.com/online-commercial-intention/

  I would like to use the contact information on this page to see if the tool will be available:
  http://ADLAB.Microsoft.com/contact-us.aspx

  Contact information
  • Microsoft Bing Ads Labs
  • 1 Microsoft way, Redmond, WA, 98052-6399
  • Phone: 425.882.8080
  • Fax: 425.936.7329
  • E-mail: * e-mail address is removed from the privacy *.
  • Website: http://adlab.microsoft.com

    Sincerely,

    Marilyn

• What is the correct syntax for the use of a variable in an ad-hoc query?

  Hi all
  
  I'm a casual user of the DB and right now need to update the records about 1000 + so that a certain column gets a unique value.
  
  So I thought I'd use a variable for this.
  
  Then, I built this type of SQL statement for only a small subset of records:
  ----------
  variable number recNumber;
  exec: recNumber: = 1;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  I get invalid SQL statement error when you try to run above (except for the guest who asks for a value I want to omit).
  
  In any case, I also tried this one:
  ----------
  CREATE SEQUENCE seqCounter;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  Of it, I got the error ORA-01722: invalid number... I guess it's because seqCounter is of type number and the COL_TO_BE_UPD is of type character... (?)
  
  Then I want to ask is what is the correct way to define and use a counter variable type to add a number at the end of a string?
  
  Also another question I would ask is that are variables that are used in queries ad hoc, also called "bind variables"?
  
  Thank you muchly

  If you want to add a unique number to a column, then it would be:

  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
  WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
  

• What is the correct notation for complex variables

  I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly

  It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag

  (< FileExists('#request.site.imgupload#\max_#MultiPowUploadFileName_0#') cfif >
  < cffile action = "Rename".
  source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
  destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
  < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / >
  < / cfif >

  < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / > is what gives an error construct CFML invalid encountered, ColdFusion was looking at the following:

  _max.jpg

  Then I try

  < cfset thisFiletoMove1 = #request.currentimgid & "_max.jpg" / > and I get
  

  The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid

  So now I wonder, what is the correct way to do this?

  Bianca

  bianca_homedev wrote:

  I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly

  It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag

  
   
  source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
  destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
     
  

  is what gives a construction of CFML not valid error found, ColdFusion was looking at the following:

  _max.jpg

  Then I try

  and I get

  The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid

  So now I wonder, what is the correct way to do this?

  All are both wrong:

  
  

  You were near. What you meant was probably

  However, are even better
  
  

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• What is the correct value for "simultaneous: GSM enabled.

  What is the value for the option of profile:
  
  ' Competitor: GSM enabled.
  
  Is this 'Y' or 'yes '?
  
  Can someone give me a link to the 11.5.10 docs that show this?

  Hi Chris,

  What is the value for the option of profile:

  ' Competitor: GSM enabled.

  Is this 'Y' or 'yes '?

  It's there for Yes and N for no..

  You can refer, please
  * [How to set the simultaneous Option profile: GSM enabled for N using AutoConfig | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391240.1] *.

  * [How to solve problems when the Workflow Services descend | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=564394.1] *.

  * [Services start correctly with the active GSM | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391239.1] *.

  * [Troubleshooting problem Manager Start Up related to the Service Manager competitor | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=735148.1] *.

  Thank you
  Anchorage :)

• What is the best size for a buffer overflow in BlackBerry?

  Hi all

  In my application, I need to read data from an input stream. I put the current size of the buffer for reading as 1024. But I saw in some applications Android size memory buffer has been preserved as 8192 (8 KB). Is there a specific advantage if I increase the buffer size in my application up to 8 k?

  Any expert opinion will be highly appreciated.

  First thing to note is that the method "isAvailable()', in my experience, does not work on OS 5.0 and earlier versions.  It is attached to the OS 6 (at least in my tests).

  Because isAvailable() has been broken, (and for other reasons of demand) that I put in place for a socket connection is that each message is preceded by a length.  So I read in the socket connection, the length of the message, and then the actual data.  This is done with no lock - in other words, I read the entire message, regardless of their size.  I recommend you do the same.  The message must exist in full somewhere, so it makes no difference if it's in memory managed by the socket connection, or some memory managed by you.

  Note also, until the 5.0 OS, when you made reading so that you get all the data fill the buffer you had - in other words, it was blocking.  After the OS 6.0, playback can finish without giving you all the data.

  In your case, you could work in a post OS 6.0 only, so you could use isAvailable() - create a buffer of this size and read all that.  I don't see that it makes a difference if you have the bytes of memory managed by taking, or managed by you.

  But in fact, I would say that the best approach is one that makes your simple treatment.  So, for example, if you know that the following message is 200 bytes, then read 200 bytes and then process this message.  Then read the next message.

  You could spend a lot of time trying to manage the buffer to match the underlying socket buffers.  I don't know exactly how the underlying socket of BlackBerry processing code, but it is not put data directly in your buffers.  Then let it manage its buffer size to optimize the network, you manage your buffer size to optimize your treatment.  That will work best for everyone.

• What is the correct process for the construction of webworks + apps cordova with ripple?

  Hello, I'm developing an application targeting os6 and 7 devices using phonegap and tests through the emulator to ripple. The emulator seems to be missing the package for blackberry in cordova apache mode option. Switching mode webworks brings up the option. However, the deviceready event that cordova expects is not raised in this mode. Therefore, do not start apps according to the deviceready event.

  Is there something that I am missing?

  WebWorks and Cordova are two separate web platforms.

  WebWorks mode, you will be able to imitate WebWorks APIs belay the WebWorks SDK to your content of HTML5 (sign) package in a BlackBerry application.

  In Cordova mode, you will be able to emulate the Cordova APIs (including the deviceready), however there is no integration with the Cordova SDK for real packaging process. You will need to follow the documentation of Cordova for packaging and signing.
  http://Cordova.Apache.org/docs/en/3.1.0/guide_platforms_index.MD.html#platform%20Guides

• What is the correct version for version OA Framework 11.5.10.7RUP

  Hello
  Can you please suggest me which is the correct version of jdeveloper, I used version.
  
  OA Framework 11.5.10.7RUP
  Oracle Applications Extension 9.0.3.8.13 - build 1570
  Business 9.0.3.9 components
  UIX (Cabo) 2_2_24_5
  BiBeans Runtime 3.1.0.82 no Debug BI beans 3.1.0.x
  MDS 9.0.5.4.89_562
  XML Oracle XDK Java 9.0.4.0.0 Production
  Object Applications AOL/J, Java Core Library roll up Patch J
  Servlet 2.2
  Java 1.5.0_20
  Driver JDBC 9.2.0.8.0
  Database Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  SunOS 5.10 operating system
  Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0)
  
  Kind regards
  Adhi

  Hello

  Download patch Patch 8751878.

  Kind regards
  GYAN

• What is the correct syntax for it?

  Hey guys

  If...

  trace (rowsHolder.getChildByName("MC"+newStr).y);

  .. .correctly outputs it coordinate with (in this case) mc001, how out the coordinate y of a clip called item_base_mc that is located in the timeline of mc001?

  trace (rowsHolder.getChildByName("MC"+newStr).item_base_mc.y);

  .. .save me an error display object.

  I tried the permutations of the above with the brackets in various places, but have not cracked the code.

  What would be the right way to write?

  Thanks for taking a peek.

  Shaun

  trace (MovieClip (rowsHolder.getChildByName("mc"+"001")).item_base_mc.y);

  hope this will help you!

• What is the best size for a header?

  Hello

  Adobe Illustrator has defined the size of letter in 21,59 * 27,94. Most of the letters that I receive by mail are A4 size. I wonder if I could get a couple of opinions on what would be a more appropriate size to build on for my portfolio? I would prefer to get used to the design on the most commonly used size.

  See you soon.

  In the letter WE U.S. size is standard the rest of the World A 4 is standard A 4 is based on the metric system it is a rational segment of a certain standard size metric sheet of paper. US 8.5 x 11 inch letter is based on something more arbitrary or t less lost in history. The method of determination, it has ceased to exist and it is just everywhere.

  The latter is used for the most part, the United States of Mexico and the Canada, but I think that the last tow countries also use A4.

  A4 is rarely used in the United States, which is the basis for determining what size to use.

  .