What is the dashboard?

Similar Questions

• What is the speed of data transmission when using the dashboard of data?

  Hello, everyone, I've seen it doesn't matter if an iphone or a Chinese tablet is used, the speed of transmission of data with the shared Variables and dashboard of data is almost the same and is at reduced speed. Does anyone know how I could measure this baud rate? Thank you in advance.

  Hello there;

  The rate of updating the dashboard data for 1.0 is set to 1 second of webservices and 0.2 second for variable network shared, of course depends on the amount of information on the network continuously. On the second version of the dashboard of data, you can specify your update frequency within a range

  You can find this info in this KB

  Hope this info helps.

  See you soon

• The user must select what facts he wants to see in the dashboard

  Hello
  
  I have a user who wishes to choose a combination of facts (for example 3 facts in a list of 9 facts)... as a line of dashboard and needs this selection to reflect through the dashboard which consists of various reports (tables, tabular reports, and pivot) most of which using different dimensions with different filters in their...
  
  Is this possible? Any ideas?
  
  Thanks in advance.
  
  Ash.

  Hey...

  If possible, then rename these columns in the presentation layer of RPD itself precisely you wanted to see in the guests...

• On the table edge Mac & the application of the dashboard?

  on my Apple iMac computer in the Mac Dashboard, I have a few Mac Dashboard app that I used a lot

  but for some reason the ESPN App & The Movie Theatre dashboard Dashboard not working more

  It is impossible to get the content?

  did stop work of the dashboard application Apple make these 2?

  in this way for a few days now and I wanted to know what is happening?

  so I just need to check with you guys to see what is happening?

  other then that my Apple computer iMac works perfectly

  Remove these applications of dashboard, then reinstall it.

  To remove a Dashboard widget, click the Remove (-) button in the lower left corner of the dashboard, and then click the button close the unwanted (X) widget.

• What is the largest hard drive or the RAID supported by El Capitan and Yosemite?

  What is the largest hard drive or the RAID supported by El Capitan and Yosemite?  Also, WHERE can I find this specification?  Drobo claims that 16 TB is the largest external RAID supported and I do not.

  FYI............ 2 UPDATES since I posted this question:

  "1. Drobo has updated their FIRMWARE to allow now to 'beyond' 64 power to RAID".  Thus, their original 16 TB limit has now been replaced by their new limit of 64 to.  Also note that when you use a Drobo, Apple Mac OS does correctly shows space 'Drive' and the 'free space', if the Drobo 16TB exceeds the size; but the Application DashBoard of Drobo displays the correct numbers.  For example, my Drobo 5 d contains 5, 8 TB disks, for a total size beyond 40 to RAID (theoretically, since most of us should know, now, that the ACTUAL SIZE IS SLIGHTLY SMALLER than THE THEORETICAL SIZE).  AVAILABLE FOR USE ACTUAL SIZE IS ONLY 28.9 TB.  Thus, 40-28, 9 = 11.1 TB gets used in place for the PROTECTION of RAID beyond and the difference between REAL SPACE and SPACE THEORY.  It IS NORMAL because any RAID 5 device always uses about 1 size of hard drive for its Protection.  So, knowing this, the DeskTop icon showing 28.9 TB disk space and free space as everything that is not yet used.  However, instead, the Mac OS shows 70,37 TB disk space and free space like 68,37 TB, which are both incorrect.  Although I'd love it if Mac OS has been magically increase my disk space, in fact, these two numbers are false.  Drobo knows this, and Apple has not, in my discussions with both.  So I hope, between the two companies, that this problem can be corrected.

  2. after many hours on the phone with Apple Support, through no less than 6 people including 2 senior advisers, NONE OF THEM COULD ANSWER MY QUESTION ON CE WHO IS MAXIMUM ALLOWED HARD DRIVE or RAID SPACE AUTHORIZED BY Yosemite and El Capitan.  For me, THIS IMPORTANT FACT SHOULD SIMPLY BE LISTED IN THE OS SPECIFICATION TECHNIQUE, it's quick and easy to read on the Support Site.  But Apple is the new bureaucracy, they are, I don't see what is happening any time soon.  So, be aware that, for now, HE IS No. LIMIT ON SIZE, as an Apple adviser said; but could not confirm in writing; and, IT IS AN INCORRECT DISPLAY SIZE AND FREE SPACE, if your drive is greater than an unknown 16 + TB in size.  Note that I have 3 other RAIDs that are properly in place showing that 9 TB, TB 12 and 18 to size; but I do not know how the SIZE IS IMPORTANT to ensure that the operating system display it correctly, except for my Drobo TB 40.  So, the bottom line, somewhere between to 18 and 40 to is where he goes wrong, in its display of sizes.

• How do I move the dashboard to another space?

  I recently got a new iMac, and after the migration from a Time Machine backup, my widgets now have their own space.  On my Mac Pro widgets open in every space, and I want to make it work this way again.  But it is not possible to remove the space from the dashboard (not), and I can't find a way to change the dashboard to work in each space (there is no popup Options that I can see).  I want widgets to pop up on the current screen what he can be, so I can see what's behind the widgets.  For example, if I appear a calculator and see a list of numbers in a document at the same time.  I don't WANT widgets in their own space with just a white background.  How can I do?  Or is - it is no longer possible with El Capitan?

  Go to system-> Mission control preferences and set the dashboard for "like"recovery."

• When I open the dashboard it closes and opens up safari to a link of farmville. How can I fix it?

  When I open the dashboard it closes and opens up safari to a link of farmville. How can I fix it?  It's been since ages... thought that updates system could possibly set

  iMac 21.5, end of 2012

  This procedure will reset the configuration of your dashboard to the default value.

  Back up all data before proceeding.

  Please triple - click anywhere in the line below on this page to select:

  defaults delete com.apple.dashboard layer-gadgets && killall Dock

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

• How can I customize chumby apps in the dashboard?

  [color = #4000FF:2h8jkxao] How can I customize chumby apps in the dashboard? [/ color: 2h8jkxao]

  I tried creating an account @ chumby.com and update applications online, but is not displayed in the dashboard, for example the Netflix apps display/update queue you, see what @ home, new versions and one other application, the Yelp app? When I add those on the dashboard it is said on the lower right corner on 'Customize online @ chumby.com' but how does it work for the dashboard? Someone has an idea?

  I thought about it! log on to dash.chumby.com to manage apps there is a link to customize here.

• One user away from the dashboard of the range Windows Server 2012 R2 Essentials

  We migrated from SBS 2008 for Windows Server 2012 R2 Essentials range. All users and computers have successfully migrated and their list is visible in the ADUC.

  However, a user is missing from the Windows Essentials Dashboard (users in the navigation bar, tab users).

  The user can work normally: connecting to Active Directory, it can see shared folders and so on. But it is not in the list above. Because of this, it cannot be administered in the dashboard (for Windows Server Essentials).

  What can be the problem? How can get us in the list? What other information should we supply for you to find the answer?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• What is the flashing light all under audio beats logo on a monitor of 610-1280 touchsmart?

  What is the flashing light all under audio beats logo on a monitor of 610-1280 touchsmart?

  It is the indicator LED for the IR (infrared receiver) for the remote control.   He indicates that he thinks he gets a signal from the remote control.   Take the remote control, press volume / down - you should see it blinking.   If it flashes solo - with nothing else around - there is probably a source of IR in your area that is triggering.   Trying to hide something and look at it as much as you can - see if the frequency has declined.   If not - it will take can be worked (either one - or do as the car talk guys recommend for dashboard lights - try to use black on tape ;-)

• SQL Server - HADR always on error - cannot always display on the dashboard

  Hey everybody! While we have recently obtained our first availability of SQL Server 2012 running group. We have the name of Group of availability with two nodes for this group. However, I don't know how to turn the dashboard found at [Server] > HADR > always on. When I try to see it from a particular node, I get the following error:

  

  In case you can't read that, the error is "this SQL server version is not equipped to always on the ability." But I am positive, we are currently running SQL Server 2012 and we have a working group of 100% availability. Here you see the version of the server:

  

  Sorry for the blurry photos. If you can't read that, it says that the version is 11.0.3000.0 (SQL Server SP1 2012). You can also see under HADR the always on the icon is grayed out.

  So basically I'm wondering if anyone knows what is the problem? Anyone encountered this before? I would not be surprised if it is just a few little configuration or something, but I've searched and can't seem to fix this. Anyway, please let me know if you have any information. Thanks in advance!

  For reference, in my view, it is perhaps the issue: https://support.software.dell.com/foglight/kb/123084

  Basically, there is just a bug with the version of the SQL Server cartridge I use. Someone on the team in my company will be upgrading to the latest version next week, how I will update this post with the results.

• Driver problem for the dashboard of media

  Hello

  I installed the dashboard of media today, but there is a problem. The first time that an SD card is inserted in the jury he identified OK. After the withdrawal of the security, it is not identified more and cannot be opened. I need to restart the PC (Windows 7 64-bit) to open a card again. What is the solution to this problem? The seller has no drivers and said Windows 7 should identify the device.

  Hi Alexander,.

  If this is the scenario then, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Press the Windows key + R to open Run box.
  • Type devmgmt.msc in the run to open Device Manager.
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Keep us.

  Kind regards

• To an existing dashboard, how can I go back and discovers the source of data for the items in the dashboard? More precisely to determine why the data not displaying on the dashboard for a host where the agents seem to work fine.

  Here are the servers in the cluster.  The active cluster in the attached image is PrdERx2.  The zeros should have a count associated with them equal to zero.

  Thank you

  Barry

  Hi Barry -.

  If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.

  I hope this helps.

  Robert

• How to pass the time slot to the dashboard in URL parameters

  Hi all

  Does anyone have example on how to spend the time slot to the dashboard in URL parameters?

  That's what I tried. Normally, the dashboard has timeRange as a required context, I deleted and added "startTime" and "end" like required context, so that I can spend 2 timestamps in URL, and then I created a 'extra context' called "timeRange", which calls a WCF function to create a CustomTimeRange, it works pretty well. But the problem is if I have exploration down this dashboard to a different dashboard, the slot not transmitted properly. So I guess, I was not the right way. Does anyone have an example?

  Thank you

  Xiaoning

  1 re: timeRange not spent in drilldown pages

  Please confirm that you have defined one or more entries in context "Required". If you do not, please add a (like "hostName") and re - test. It work?

  2. with 'nologin' user URL redirects to the login screen

  Yes, what is expected. With nologin user, you should always use the form http://foglight_fms:80/console/foglight_ext?viewId=system:mywcfmodule.1?hostName=myhost of the URL rather than the

  form of http://foglight_fms:80/console/page/System:mywcfmodule.1?hostname=myhost .

  It would be great if you could post a brief description of your design dashboard once you have this work. That sounds like something that the other members of the Foglight community would be very interested!

  Kind regards

  Brian Wheeldon

• Change the dashboard 'summary of active host.

  Hey everybody! I'm new to Foglight (using 5.6.5), but I was instructed to create a dashboard that will appear on a screen in the office. The dashboard is supposed to be the same as the summary of active hosts, who was created by default, the only difference being that it should only show servers 'Production '. Now, it seems really simple (and probably), but I've been struggling with this project days. I feel like I should just be able to copy summary of active hosts and make a quick change to the context and specify that it should Prod servers and not all servers, but I didn't understand how to do this.

  I was wondering if anyone has any advice on how to go about it? Am I right in assuming that I can just copy the AHS and change some of the settings? What I have to change? I've tried a few things, but to no avail. I hope this isn't a stupid question, I just jumped in the middle of it and trying to learn as I go. If you need additional information or screenshots, let me know. Thanks in advance, it is greatly appreciated!

  Dashboard active hosts summary

  

  Production group

  

  The host summary view active is a sharable view, so you can add it to your own dashboards.

  1. create a dashboard from the action panel

  2. in the control panel actions, select the view tab

  3. open the host section in the view tab

  4. drag the host summary view in the middle of the screen

  5. create a Service in the Service of guests of the Production Designer. Call the Service Production hosts and then add hosts to the service

  6. in your custom dashboard, in the summary of the host view, select Service selector, then select service Production hosts

  David Mendoza

  Foglight Consultant