What is the HP USB 2.0 Docking Station driver for?

Similar Questions

• Dell SuperSpeed USB 3.0 Docking Station model: D3000 lose 2nd monitor connection

  My Dell SuperSpeed USB 3.0 Docking Station model: D3000 is connected to my Dell Inspiron 17R 7720 SE as well as two external disk drives, an external DVD drive, printer and speakers as well as an external monitor.  Recently, I took my laptop on a trip, and when I got home, when I reconnected it it to the docking station it is no longer recognized my external monitor.

  I went through several stages of diagnostics not limited to unistalling then reinstalling the DisplayLink software and accidentally fell on the only action that seems to work - power omitting the Docking station (pulling on the power cord).  Unfortunately, this is a pretty serious action to be taken and the patch does not seem to stick, as I had my second monitor drop out after restarting my computer.

  The biggest problem is that I spent over a week trying to figure out where to get assistance for the Docking Station and the DisplayLink software.  It seems that my only alternative is to call and talk to Dell Technical Support, but is very annoying because my work hours are with Dell Technical Support, but it comes to my personal computer.

  PS another problem I have with the Station of host USB 3.0 SuperSpeed from Dell which is the rubber feet on my Dell Inspiron 17R SE 7720 are outside the width of the laptop docking Station can be positioned on top of the Docking Station because it slides right out.

  I thought I should update the Dell Community in the hope that a few users will read this BEFORE buying a Dell Super Speed USB 3.0 Docking Station.  I would update my opinion on the Dell site, but this is not supported by Dell, after entering a review you can not update.

  Since my original post here, I've known some even more frustrating failures.

  1. Failed to connect Ethernet- My Ethernet connection failed, resulting in the loss of connection with my router and although obviously internet.  I made the important diagnosis and it is finally down to pulling on the power cord of the Station of Dell Super Speed USB 3.0 host.
  2. New router connection not recognized- I bought a router of Netgear R6300 WiFi as I bought the Dell Super Speed USB 3.0 Docking Station, unfortunately I can't the device works with the Docking Station in the loop.  It is with the Dell USB 3.0 Docking Station.
  3. -Speaker problems I had problems with my speakers mounted externally which I thought maybe Windows 8 questions but finally came down to problems with the Dell Super Speed USB 3.0 Station home, fixable in some cases of powerfailing the docking station.
  4. Lack of support- Want to know if this could be caused by the software support, I discovered that the consumer is caught in the middle.  The software providing the support bi-ecrans

  In summary - I found the Dell Super Speed USB 3.0 Docking Station to be a totally reliable device with the announced characteristics does not always, including: dual screen, ethernet, sleep mode and support of speaker connection.  In addition the Docking Station does not efficiently, requiring two connections and not providing the simplicity with docking stations specific previous Dell machine.

• What is the best way to backup a hard drive full of pictures and videos on another external hard drive?

  What is the best way to backup a hard drive full of pictures and videos on another external hard drive? I want an exact clone-

  Drag and Drop? Time Machine?

  Thank you. DB

  < object edited by host >

  If you want an exact clone, you will need to use a utility like utility disk, Carbon Copy Cloner or SuperDuper!

• What are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes game against external hard drive, Solid State etc. to store my songs iTunes, playlists, ratings etc?

  First question: what are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes Match against Solid State external hard drive etc to store my songs iTunes, playlists, ratings etc?

  Please let me know what are the alternatives for storage of my songs, playlists, song etc. other than iTunes game ratings ($ 24.99 / year)?  Is there a way to store all my songs with my song ratings, playlists, etc. with a CD song quality? Most of my (currently 130 GB) songs on my computer are CD quality that I prefer to keep as well as my notes of each song (i.e. 5 * vs. 4 * etc.), playlists, groups (music, classical, popular, country etc.).  What are the advantages and disadvantages to store my iTunes songs while CD quality with my personal notes, reading lists, groupings in the cloud?  ICloud of Apple Drive ($ 2.99 per month or $36 / year for 200 GB) would be the best way to automatically update and maintain my rankings iTunes personal including the future editions of the song etc or using Amazon, IBM, Microsoft etc cloud or an external hard drive SSD would work as well and maybe cheaper?  I currently have my iTunes on a PC of 2007 with vista (I use a 1 8T Western Digital external upward by car for my personal info all over HP, songs, photos etc. which is currently close to 170 GB) but also have an Apple i-phone 6 & I Air cushion.  Although I did not need to have all of my music with all their sides, etc. available on all of my devices at all times as iTunes game, I still would have easy access to information on both my PC and my iPhone or iPad?  Thank you.

  In my opinion?

  I back up my data to an external drive for several reasons.  The first is my data - if I put on the cloud, someone else has control over it, they can see what I have and change the preferences to what they see of marketing.

  Almost as important as that - if I had to rely on the cloud whenever I wanted to update my playlists on my phone, I need a better internet connection I have now (working at sea).  To get the best out of the cloud, you need a solid link to home, work or mobile.

  As a spin-off - I hate the fact that Apple take away a feature in their software updates and then allow an app to be sold in their store to replace this feature - or worse still, some features that were available before the updates are now "cloud only."  And Yes - you have to pay for the cloud.  I like most of the people do not appreciate the 'accomplished fact. "

  From the back of the external hard drive ASI downside, is that to be safe, you need to store outside in a separate computer place.  If keep you them together, if one is lost, probably, they are both.  That is to say for me a full backup before you travel, then a new upward as soon as I go home.  Downside is how much data may be lost between the two back ups if I needed to restore.  For me, its worth the risk.  If I was away and say had bought a ton of new music and couldn't go home anytime soon, I can always head to the store and buy a new external drive, they are massively expensive.  Even if my computer has to go for repair and my remote is to halfway around the world - I want to buy a new one.

  Now, some will say that once you buy a new external, you spend more than you would on a cloud subscription.  It's true, but in the 6 years following the purchase of Mac that I've only had to buy a new external once - so with a little luck and planning - it works.

  I left took well - I am not a subscriber of cloud, nor do I want to be.

• What is the value of a registry entry "PromptRunasInstalNetPath" Windows for?

  What is the value of a registry entry "PromptRunasInstalNetPath" Windows for?

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies]

  "PromptRunasInstalNetPath" = DWORD: 00000001; Guest ' run as ' install Net way -?

  It is not yet in the "WindowsServer2008R2andWindows7GroupPolicySettings.xlsx" Microsoft Excel spreadsheet Data-Base; so that is it for exactly?

  Ditto for the following RegEntries 3:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Network]

  "NoWorkgroupContents" = DWORD: 00000000. No content of working group -?

  "NoFileSharing" = DWORD: 00000001; No file - sharing?

  "NoPrintSharing" = DWORD: 00000001; No print sharing -?

  JPD

  Hi JPD.

  Thank you for visiting the Community Forums of Microsoft.

  We don't have enough resources to provide a good explanation for this query. It is better suited for the professionals on the TechNet Forums. So, please post your question on the Forums Pro TechNet Windows 8 IT from this link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information is useful.

• It is possible to move my profile of the user of the c:, d: and reserving my main drive for the OS only

  I use windows Vista that is installed on drive C: (OS) year 80 gig hard drive plus I also drive D: (DATA) one new secondary 320 gig hard drive installed.  I want to use the system more effectively by saving and store my files on this hard drive automatically is it possible to move my profile of the user of the c:, d: and reserving my main drive for the OS only

  There are instructions of third party to do so, but this is not supported by MS and can cause problems

  Maybe redirect Documents libraries on the D drive

• I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.

  I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.

  Thank you

  Try Google.

• What is the correct USB 3.0 PCIE card for Z800?

  I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

  Hello

  Based on the following specifications, the machine has a lot of options:

  http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

  You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

  http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

  You should check the slot to get the support of the card right.

  Kind regards.

  PS eBay is another story, you can buy some card dollars.

• Super Speed USB 3.0 Docking Station - no power supply laptop?

  Laptop is on and plugged in the docking station which is "powered".  Connection to the monitor / keyboard and mouse is fine, however I am surprised to see a less power - plug is soon message.  Docking station is not supposed to power the laptop?

  In fact, I think that what makes a docking station for a docking station, because it is a device that actually connects to a docking port. Thus the name docking station. A usb port isn't a docking port. A docking port is a single port that provides many pine so different protocols such as video, audio, usb, and Yes power etc. all have their own connections so that they can operate at their full potential. A docking port is not a conversion of many protocols for a usb signal, then try to cram two ways between the pins a lot less. And saw that all the "docking ports" as far as I know, have connectors to supply them, I do not see how Dell calling a port replicator a "floor" could confuse someone. I don't think whether a good faith error or another, simply tactical knaves in the marketing department to take advantage of what people believe to be a docking port so that they can make a nickel. Think that a wharf shipping, with access full power, fuel, water, sewer connections, the whole shebang. But rather a boat anchor so that you can anchor your boat to the coast, so take your time waiting on what ever ashore ship transport boats you can find the basket with a limited amount of resources via a limited method.

• E6420 not recognizing USBs when at docking station

  New Dell 6420 running Windows 7 32-bit - when you are connected to the docking station, it does not recognize the USB ports. Ive connected my USB mouse in every usb port and nothing to receive. I connect it to the port on the laptop itself, moored and its recognized. My first thought was bad docking station, tried another (both are new) with the same result. I actually ended up trying all 4 together during my whole process. Ive done the full restart, plug back on and off the docking station with the same result. I tested the usb ports moored in the bios - the mouse is recognized in all ports. That's when the laptop is docked, in the bios settings. So I thought Windows problem, maybe a bad installation... I started Windows and now all but 2 usb ports on the docking station (or port replicator, I should say) detect the usb mouse and other usb devices. I also checked the device (while only docked and undocked) Manager the only thing Bell is an unknown device under usb devices (this unknown device stays anchored and detached).  Any suggestions on what can happen and what I should fix this... im trying to stay away from doing a full reinstall.

  Thank you.

  WARNING: THIS MAY NOT SOLVE YOUR PROBLEM (but there is an equal chance that it will be then I would try it if I were you)

  Hello

  I just started a new job and had the same problem. I fixed it as follows:

  Go to the computer

  Go to system properties

  Go to the Device Manager

  You should see "Network adapters" section full of "Unknown devices" for me there were two of them and two other devices with unrecognized names.

  Right click on each one from the first on and select "update driver software...". »

  Select "search automatically.

  After I updated all of these drivers and plugged the nano-receiver for my keyboard and wireless mouse in the dock of the computer finally recognized and let me use the keyboard and mouse, I use what I'm typing this message :)

  I hate to see these tickets up on sites for years without anyone answering them that it's really frustrating, and not a good sign for a manufacturer/vendor like Dell. Hope everyone who comes on this forum with this problem is it resolved.

  Best,

  Mike

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.

• Tecra M9 - save the settings of display with docking station

  Hey there.

  I have a user who has a Tecra M9 on a docking station.
  There are 2 monitors connected to the docking station with VGA, the other with DVI. I use the Nvidia Control Panel and configure the screens and all is good in the world.
  That is until the user off the laptop, some work at home, then puts the laptop in.

  Therefore, only one monitor works, with the second out of action.
  I can go back and reset the configuration, but the user does not want that to happen every day.

  Any suggestions on how to get the laptop to save your setting as the case not docked or anchored?

  Thank you!

  > That is, until the user off the laptop, work at home, then puts the laptop in.
  Do you know what the user did in the past?
  To my knowledge there is not any special options that could save it. If you click on the button (apply) the changes are made and recorded.

• USB 3.0 docking station pro with two monitors

  I have an E550 connected to a dock, Pro USB 3.0. To get two monitors working, I got a VGA plugged into the laptop to a monitor and a SVGA from the platform to the other. I want then to the main display on the second.

  But I can drive both monitors of the dock? It is not clear in the manual if this can be done. I suppose that if I hang a HDMI VGA adapter to the dock, I can then drive the first monitor from the dock too?

  I can confirm that it works.

  A DP/DVI for dock first monitor and a DVI/DVI for the dock to the second monitor gives an extended through the two display.

• The m7 HP Envy laptop: docking station connector

  I bought the computer laptop hp envy m7. It is not compatible with the connector for my docking station, HP xb3000 notebook expansion base. Is there an adapter for the expansion base to the portable Envy? Is there a docking station for the HP Envy laptop?

  Thank you

  Bryan

  Hello

  The m7 envy laptop does not therefore docking port, you will need to use USB docking port. There are many ports of USB docking around such as:

  http://www.Amazon.com/HP-Replicator-docking-H1L08AA-ABA/DP/B008KMDVME

  (HP store says there are 11 products but the site is inaccessible, you can wat to get a complete list

  http://store.HP.com/us/en/MDP/accessories

  Kind regards.

• what I have to write the serial number. before you download a driver for my printer?

  What is the serial number helped and I have to write down it before you download a driver for my printer?

  I have my printer and I want to download the driver that is related to my printer, I searched but did not find where I can write the serial number to reduce the possibilities of the wrong driver.

  There were also 3 options after that I named my printer:

  1. HP Officejet 4500 all-in-One Printer - G510g

  2. HP Officejet 4500 all-in-One printer - G510a

  3. HP Officejet 4500 Wireless all-in-One Printer - G510n

  I don't know what I should choose.

  

  Best regards

  So, you can use the Installation Wizard of HP printer if your using Windows 7, 8 or 8.1.

  If you have any of the above operating systems, connect the printer to your PC via the USB port or connect it to your network.

  Then run the next tool that will detect your connected printer and download the correct driver for it:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/PIW/&softwareitem=MP-122330-1

  If you have any other operating system, please specify your printer model exactly as shown previously.

  Kind regards

  Shlomi