What is the length of the supply cable 3 yoga?

Similar Questions

• What is the longest cable that you can use for a webcam If you want to move a piece

  What is the longest cable that you can use for a webcam If you want to move a room, you want to use as a granny cam

  I get up to a cable of length more camera more and then peripheral is not is not recognized. I Yawcam program on my computer which is optimal

  for a web camera to use invisably.

  According to the official FAQ USB. page here:

  http://www.usb.org/developers/usbfaq#cab1 ,

  5 m is the maximum length of a USB cable. A lot of points 3 and 4 on the above page dealing with how to deal with scenarios beyond this length.

  Personally, I have only ever went up to 4.8 m and it was with an external hard drive (which had its own separate power supply).

• What is the best cable for monitor DVI - D and VGA input connectors?

  I buy HP P6300z desktop computer with ATI Radeon HD 4350 (DVI, HDMI, adapter) graphics card and W1858 monitor VGA; DVI - D input connector. A VGA cable is supplied with the monitor. The VGA cable will give me the best viewing experience or should I buy another cable?

  Buy a DVI - D cable.  DVI means Digital Visual Interface. It will provide images of superior quality on your screen as VGA.

  VGA is analog.

  HDMI (High Definition Multimedia Interface) even better would have been

  Kind regards
  ERICO

  
  

• Diagnosis copper wire test on SG200-26 Gigabit Switch - what is the "open cable" telling me?

  I have installed a Switch Cisco's Gigabit SG200-26 to the installation of the client.  They have a severe latency on their network, so I was hoping the switches capacity could help me track down the problem with the statement.  There are 7 computers in white box on the switch.  Six computers have been sold at the same time and have the same motherboard.  A computer seventh was sold a few years later, and has a different motherboard.  All computers have the NETWORK card on the motherboard.  All seven computers come with ' Open Cable - cable is connected on one side "when the analysis of the copper is run under the Diagnostics tab.  Each test has an inclination of NS 8 pairs at least three reports four sons.  A router, server Dell, Cisco wireless router, used only as a point of access, an old computer (about 10 years) and a small Netgear switch good show all in the analysis of copper.  Each node is except the switch Netgear gigabit speed and the old computer.  None of the ports that are attached to the computers display errors.

  Thinking that maybe the wiring of the installation is all bad, I took a computer to the switch and connected a connecting cable of known network and in a good 5' from the computer to the SG200-26 Gigabit Cisco Switch and then I did a test of copper.  The results were the same - "Open Cable - cable is connected on one side.

  I am completely confused by all this.  First of all, what exactly does "Open Cable - cable is connected on one side?  These computers can access the Internet and the server and sometimes seem to have hours of access to resources, so I know both ends of the cable are connected.  And what is the inclination was trying to tell me?  Is it possible that all 7 computers, which are Windows 7 32-bit and a couple of 64-bit operating systems have a driver problem?

  Help here would be most appreciated.

  Hi txlmbardi_2,

  This really should not conduct so please open ticket with Cisco Small Business Support team to deepen this review:

  http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...

  Kind regards

  Aleksandra

• What is the length of the USB cable provided with the Lide 120

  What is all the USB cable that comes with the 120 Lide

  Hello.

  The cable is supplied with our scanners is about 5-6 feet in length.

  It has not responded to your question or problem? Find more help contact us.

• What is the length of cable max mini display port HDMI

  What is the maximum length of MiniDP to HDMI cable without loss of video signal?

  Jim

  Mini Display port, length max HDMI?

  http://www.PopularMechanics.com/home/how-to/a6751/how-to-extend-your-HDMI-cables /.

  http://forums.MacRumors.com/threads/long-mini-DisplayPort-cables.1178231/

  http://superuser.com/questions/451126/mini-DisplayPort-cable-Max-length

  It seems that it is very dependent on the quality of the cable and the resoloution

• What cable do need me to a second hard drive on the DV7 - 4104ca. The caddy kit is the wrong cable

  I bought the hard drive enclosure kit (605415-001) to install a second hard drive on my DV7 - 4104ca. The cable supplied with the kit is the same on the main hard drive, but the motherboard has only 1 conntector to cable companies. There is another free connector on the card that uses the same cable that the internal hard drive, but assistance phone HP has no idea what I'm talking about.

  Does anyone know which cable (part number) I need?

  Or even what it is that the type of connector called and then I can source my own cable.

  Thank you!

  You are the very welcome.

  It will be.

• What is the cable of data recovery?

  With my flame came a wire called 'data '. What is the difference with a normal Micro USB cable? Is it connected differently?

  I noticed that when I connect to my flame using a standard Micro USB cable, then it behaves funny. I saw him restart spontaneously, and also saw him plug and unplug several times. With the cable of data recovery, connections appear to be stable, but I wonder why. The Keon has worked well with a standard Micro USB cable.

  Hi Fekle,

  I'm not sure what the difference is in the cable of data recovery. For me, when I use this cable to recharge, my camera flame has strangely, sometimes requires me to remove the battery before restarting the unit.

  I had written to T2M asking how to use the wire and this was their response:

  Please follow the instruction below to rescue the phone.
  

  Firstly, we send a Recovery Cable with RED label with Flame phone, which is placed outside of Flame package. Please make sure that you have it.
  

  Secondly, please download Emergency rescue tool from http://cds.w5v8t3u9.hwcdn.net/Flame%20Rescue%20Tool.zip, unzip it, run Flame.exe and follow the attached PPT instruction to start the rescue.
  

  -Ralph

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?

• What is the point number (spare part) protects cable for ILÇE-7RM2?

  What is the point number (spare part) protects cable for ILÇE-7RM2?

  I'm looking for this part:

  http://Helpguide.Sony.NET/ILC/1520/v1/de/contents/image/b_cableprotector.PNG

  Thank you

  Michael

  I discovered, that it is the part number:

  Cable protector: X-2591-933-2

• Satellite A200-1UQ will not be on the way, power supply cable LED flashing

  Hello

  My A - 200 satellite 1UQ turns off suddenly when you are connected to the power. Now, he will not be in service.
  When I plug the cable LED (blue) - power cable on the laptop flashes quickly with no difference in speed or make a pause between flashes (so a balanced pace).
  I tried removing the battery and tried another adapter and power cable.

  So my question is: what does the flashing blue LED mean? And, possibly, what can I do to fix this?

  Thanks in advance,

  Matt Bloem

  Hello

  Check it please this Toshiba document as a first step and send a few comments - http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm

• What is the difference between the external SCSI cables and cables data acquisition

  Hi all, I would like to make a simple extension using an external SCSI cable and a NOR 184749/SH 6868. In other words, it would be: female HD68 bolt of the cable ends OR coupled to an external SCSI HD 68 male with a VHDCI 68 male cable. What are the differences between the external SCSI cables and cables as the (M) 6868EP of the CHS data acquisition. Other than the sex of the end of HD68 is usually on one. How is the posting hit buy using an external SCSI cable for an extension to tell a BNC-2090?

  Yes, I realize that NEITHER wants us to buy their cable, but in these economic times difficult, to do use all available resources, so I have to try,.

  Thank you

  joelowwatt

  Hello

  As long as you have compatible connectors, SCSI cables will work DAQ of basic functions.  They have the advantage of NO cables is that we can meet our DAQ hardware.  So, we can create pairs twisted differential pairs to HAVE, using the ground for shielding terminals and generally specialize the cable to minimize noise and crosstalk.  Because the SCSI cables are not specialized, you are likely to see the most noise and, if you go the sampling rates more Rapids, crosstalk.  If you are in a laboratory or factory with a good amount of noise EMF that your readings are not quite as clean, or if you have fluorescent lights you might see 60 Hz noise you might not see otherwise.

  If you want more details on the specifications of the SH68-68-EPM cable, I recommend these two articles.  The first example of the twisted pair and the principles of the SH cable shielding and the second gives the most precise specifications that you can compare with when looking for a SCSI cable.

  3GRD4C33 Knowledge Base: mapping list of the sons of SHC68-68-EPM & SH68-68-EPM cable

  1TGEHPDM knowledge base: detailed specifications for the SH68-68-EP cable

  Kind regards

• What's the deal with HPs "cable special fax phone"?

  I just want to know what is special. What did HP?

  My best guess? It's just a single line of telephone cable, one pair (1line ends RJ11 cable) cable. To reduce interference from line 2 - according to something I read.    Would like to know this.

  The phone cable that comes with a printer for faxing is a 2-wire cord. Used to make telephone calls telephone cable has 4 wires.

  The extra 2 wires in the cable non-telecopie are used for the antennas to help boost the sound signal. However, this causes the static signal that reduces the transmission of fax. That's why a 2-wire cord is used for the fax.

  I hope this helps.

• What is the difference between SATA and regular cables?

  I am a student in the article so I have a small doubt
  What is the difference between sata cables and normal

  "What is the difference between sata cables and normal."

  If by "normal" you make cables referring to the old SCSI or IDE/PATA cables in water it

  is a very big difference.

  SCSI (IDE/PATA are similar, but with the pins are connecting less) is the former cable style and support of the motherboard for the latter is way of disappearance on newer systems.

  

  SATA cables are used on the latest HARD drives and SSD and are supported by all the "modern".

  motherboards. The one in the photo was an end at right angles, but most are right.

  

  Two types of cable are used for HARD disk SSD and optical drives.

  BTW - As an IT student would serve you yourself well learn how to search the Internet for

  answers to these questions.

  .