Print spooler does not work

Similar Questions

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Printer spooler does not work. Printer registry file corrupted

  My printer HP Deskjet F2430 does not work. The print spooler is not running. I can't stop and restart services. The registry file is damaged. No printer is displayed in the printers and faxes Control Panel site. How can I clean up the corrupt registry files? Thank you very much.

  Hi MIchelle,

  What exactly is the problem? You are not able to start the service of coil?
  Try to click on Start-> Run Type & -> services.msc-> spooler printer-> Double click on-> start and select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• My printer is installed and then quit all of a sudden - when I go to the printers and faxes, he won't let me not reinstall my printer - the prompt says print spooler does not work. What I can do. "

  My printer has been installed then suddenly stop working.  When I go to printers and faxes, he won't let me not reinstall my printer - I get a prompt that displays the print spooler isn't available...  What is it and how can I solve this problem

  Printer in Windows problems
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324757

  J W Stuart: http://www.pagestart.com

• I get a message that the print spooler does not work

  printer was arrested, computer, shut down, turn on the computer, open a word file, checked the spooler.exe and it sees immediately 99% CPU usage.  Then I get a message that says that the spooler is not enabled.  What should I do?

  Are you trying to print before you get the error message or just come to the top as soon as you open a microsoft word file? are you sure this is spooler.exe which is taking up all the CPU not all processes combined?

• the print spooler does not work

  removed and reinstalled the Lexmark 2600 software, but without success.

  Click on the Start Menu, click Run, type "services.msc".

  In the Services pane, click on "Alert" and scroll down until you see "print spooler".

  Click on "Start service" or "Restart Service", as the case may be.

  The print spooler should work now.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Message error "the print spooler does not work.

  SONY VAIO laptop

  The print spooler service is not running

  How to fix this?

  my computer - click right-manage-click on services and applications-services-look for printer spooler click on TI-restart then set to auto.

• print spooler does not work cant use printer

  I have already commented on a previous post, but have not been answered so wrong to send the link to this post with what I posted and steps iuve taken complete with pictures and descriptions perhaps comment you on this post or this one ill control the two ty

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-wont-run-cant-find-printer/fb28decd-8488-4AD5-995a-ddbf90fbab66?tab=question&status=AllReplies#tabs

  Your question is very difficult to understand.  It is not at all clear who, if any, you have followed the procedures proposed by KB810894.

  Assuming you have Windows 7, download and run this Microsoft Fix It program--> http://go.microsoft.com/?linkid=9829711

• Print spooler does not. Unable to use printer

  Cannot print.  Cannot add a printer.  Can't download new drivers.  C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Print spooler does not

  all my printers have disappeared.
  It won't let me uninstall it it says that the print spooler does not work?

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer
  (check with the manufacturer for the latest driver).

  Check Mr. Fixits here and if you must use other methods to go back
  and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - you can find at the top of the list and do a RIGHT CLICK.
  RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type in the Find box-> Services find at the top of list - make right click on-
  RUN AS ADMIN

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I'm unable to install a printer - print spooler does not

  I have a problem with the PC.  No printer is displayed in the Control Panel printer page. When I try to add a printer the message tells me that the print spooler does not work.  Can I also book error code: "error 0x000006e". I tried all the usual bugs without success.  Gives the print spooler to think it's on; I have reset several times and it shows, but the message I get when trying to add a printer says that it does not work.  I have attached the sfc/scannow process found no corrupt files. I tried a 'restoration' without success.

  The laptop can find the printer, a Canon Pixma MP 550 and it works well but the PC just cannot find all printers in the control panel or through different programs (WORD, etc.) and will not let me add a few.  The home network seems fine and both recognize each other and I can access files on the other computer.  But on the PC, there is no printer on the network.

  Grateful for the advice.  All the usual bugs have been tried.

  Also, I tried the canon Pixma MP 550 "My Canon" routine Diagnostics.  It did not find the printer even when it is plugged directly into the PCUSB slot.  This could be a problem of LPT 1?  So, I don't know how to access the LPT to reconfigure.

  I also opened OUTLOOK and WORD and tried to add a printer in this way, but I get the message: "the Active Domain Services are currently unavailable.

  Grateful for any help here.

  Concerning

  I found this link to Arthur Xie that worked:

  http://social.technet.Microsoft.com/forums/Windows/en-us/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/cant-add-printer-print-spooler-crashes-error-code-0X000006BE?Forum=itprovistaprinting

  It seems that there are some conflicts of registry HiKey.  Following his procedure got all printers on the control panel/devices and printers screen and allowed me to download the current driver.

  Thanks to all who have helped me to the right solution. Restore point created now.

  Grateful and TY Arthur Xie.

• My canon iP4300 not work on64 bit XP said ' print spooler does not.

  I recently changed my computer until I ran a system of 32-bit xp and now Iam updated to xp 64 bit system and my previously fine printer will not work. The message arrives:-"print spooler does not" ideas?

  Hello

  Step 1: I suggest you to download and install the driver appropriate from the following link:

  http://software.Canon-Europe.com/products/0010386.asp

  Step 2: Try the procedure described in the following article:

  "You can not print and you receive the error message"Spooler subsystem app has encountered a problem and needs to close"": http://support.microsoft.com/kb/810894