What is the order of installation/uninstallation of upgrade of items 12 and 13

Similar Questions

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• What are the instructions for * installation * the Windows Service 'nativewifip '?

  What are the instructions for * installation * the Windows Service 'nativewifip '?
  Comments: The file "nwifi.sys" exists in the \windows\system32 directory, but the Windows Service does not exist and so must be "installed" (created). I understand that the command "sc" (service configuration) is probably the way to do it, but I do not know the correct settings for this particular Service. The nativewifip Windows Service is needed to support the Service of autoconfiguration WLAN according to the system of error events that occur when I try to start the autoconfiguration WLAN Service.

  Hey Timmy,

  I suggest you to report this issue in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• What determines the order that CSS styles class and/or target rule are listed in the menu of the class of the HTML or CSS property inspector in Dreamweaver CC?

  Using Mac OS 10.10.4 and Dreamweaver 8 and Dreamweaver CC 2015 or Mac OS 10.6.8

  What determines the order that CSS styles class and/or target rule are listed in the menu of the class of the HTML or CSS property inspector in Dreamweaver CC?

  Is it possible to change the order in the drop-down list so that a frequently used class style/Targeted rule is listed first (to the top of the list)?

  I just have an attached style sheet and which shows alphabetically in the drop-down list. Maybe, if you have more than one style sheet, the styles appear in the load order of the leaves and alphabetically within each worksheet.

• What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?

  Original title: upgrade of Microsoft XP on an emachines T3830 Dell

  What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

  What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

  Hello

  eMachines is owned by Acer, Dell No.

  Here is the information IF you ever want to upgrade a computer to a later version.

  But I can advise you that your eMachine is capable of running Windows 2000 and Windows XP.

  http://www.eMachines.com/EC/en/us/content/drivers.html

  Put your model number in the link above > then search under operating system, provided drivers

  @@@@@@@@@@@@@@@@@@@@@@

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no update free from XP to Vista, 7, 8.1, or 10.

  Forget Vista as support extended for Vista SP2 will end April 2017.

  Follow these steps before you buy Windows 7; Windows 7 SP1 to support extended to January 14, 2020.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buying and upgrading (new installation) of Windows 8.1; extended support ends on January 10, 2023.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10; extended support ends 14 October 2025:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• What is the oldest version of iTunes that can update an iPod and it runs on Intel Macs before?

  What is the oldest version of iTunes that can update an iPod and it runs on Intel Macs before?

  1. it depends on the iPod.

  2 iTunes 10.6.3 and earlier, will run on the PowerPC Mac.

  (138965)

• What is the order of driver installation

  Hai guys

  I use dell inspiron 15 3521 with windows 10. I reset my PC this morning due to software problem. After the reset of all the programs and drivers are uninstalled (ie: I can't find a single program in Control Panel > uninstall program and features). I want to reinstall all drivers and programs. I want to know the correct order to install all the drivers. Please suggest me an order of installation.

  Thanks in advance...

  Subash Baskaran,

  You can click on the link below to download the Windows 10 drivers for your computer.

  The second link provides information to pilots.

  Manual, downloads and drivers Dell Inspiron 3521

  Using drivers, tutorials, and Install command

  Your computer may or may have some drivers are not included.

• Engine performance and the order of installation NOR-DAQmx

  Hello fellow developers:

  I'm looking at a product manual which contains instructions to install the driver OR-DAQmx, a software product installer created with LabVIEW 2009 SP1 full, then the 2009 LabVIEW runtime engine in that order.

  This seems wrong - especially if a LabVIEW 8 (or previous) Run Time Engine is already installed.

  Because I need to test the installation of my builds prior to distribution I will need to install on machines that have never had any product NOR and also on machines that can have previous engines run.

  In my view, the correct order is to install the engine time run, OR-DAQmx and THEN the application.  Before running the application USB device should be plugged in so the "Add Hardware Wizard" may install the USB driver.

  What is the consensus on this?

  Best regards,

  Saturn

  Dear Roman:

  I know that the standard installation order.  The product manual that I referred to is a published by a customer for their installation, not a OR Manual of the product.

  I'll ask my customer to change their manual.

  Kind regards

  Saturn

• Adding more than one host ESX and the upgrade at the same time.  What is the order of preference of the operations here?

  We are budgeting for more licenses and hardware for 2014 and want to do immediately in January.  I am trying to decide what is the best order of operations for adding two vmware hosts additional to our current installation of vsphere and also upgrade our vsphere / esx 4.1 u3 for the latest and best.

  We have 3 Dell PowerEdge R710 running ESX 4.1 U3.  In this vmware cluster, there is a vcenter server 4.1 U3 virtual machine handle this.  The three servers are about 90% memory used so we add 2 additional servers.  Probably the Dell PowerEdge r.620 since we get up 2 in the space of a 710.  Storage is on a san EMC NX4 NFS which will become too but not yet, let's just deal with the vmware part.

  When adding additional r.620 2, should I install ESX 4.1 on them and join them to the existing cluster and THEN pass vcenter and each one esx?  I ask precisely because 90% of use on 3 current servers, I need 2 other servers to support the update operations take place.  They would be able to repel vmotioned vm while each host receives an upgrade at the same time.

  So which is the best way to go about adding of the hosts and the upgrade?  Would I add as 4.1, then they would be available as targets vmotion and so I have room to start the hosts one upgrade at a time?

  If I update vcenter to the latest version, it is comparable backwards and can manage the 4.1 hosts, but also hosts 5.x?  I guess version 5.5 is the last one I would get from VMWare?  It is right of ESXi, then, how is this ESX ESXi 5.5 4.1 upgrade?  How much storage space do I need for ESXi 5.5, as I'm dechatoiement out of these r.620 Dell and need to know what hard drive to put in.

  The steps that you must follow

  -Updated vCenter Server

  -Upgrade of the ESX hosts (because we do a updating of the material we will install 5.5 on our new guests and add them to the cluster and then dismantle our existing)

  -Upgrade VMWare tools

  -Update data warehouses

  ESXi 5.5 has these storage requirements:

  • Installing ESXi 5.5 requires a boot device is at least 1 GB in size. When booting from a local disk or SAN/LUN iSCSI, a 5.2 GB drive is necessary to allow for the creation of the VMFS volume and a scratch 4 GB partition on the boot device. If a smaller drive or logical unit number is used, the installation program attempts to allocate a region scratching on a separate local disk. If a local drive is not found, the scratch partition (/ scratch) is located on the disk virtual ESXi host, linked to the/tmp/scratch. You can reconfigure /scratch to use another drive or logical unit number. For best performance and memory optimization, VMware recommends that you leave no /scratch on the ESXi host ramdisk.
  • To reconfigure / scratch, see Configure the Scratch Partition of vSphere Client vSphere Installation and Installation Guide.
  • Because of the sensitivity of the I/O devices, USB and SD, the installation program does not create a partition scratch on these devices. Therefore, there is no tangible benefits to the use of the great features of USB/SD that ESXi uses only the first 1 GB. When installing on USB or SD, tent Setup devices to allocate a region scratching on a local disk or the data store. If no disk is local or data store, /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • In Auto deploy facilities, Setup attempts to allocate a region scratching on a local disk or the data store. If no local disk or data store is found /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • For environments that start from a San or use Auto Deploy, it is not necessary to assign a separate logical unit number for each ESXi host. You can co-locate areas scrape for several hosts ESXi on a single LUN. The number of hosts assigned to a single LUN must balance the size of the LUN and behavior I/O virtual machines.

• What controls the order of the types in the list of paette type

  TS2012

  I have a bunch of custom in my file of sequence types, and when I go to the range of types and look at the types associated with my file in sequence, they are in the 'disorder' which is not very useful for me - I would have preferred that they are in a specific order which groups them according to the category of tasks they do.   Basically, I want to be able to manaully specify the order of the types.  Worse still, as I modify some types, their order and after the editing changes they get inserted somewhere else in the middle of the list (not very useful).

  The sequence that the user interface of the editor does not provide a way to 'Capture' a type and drag around manually update the order, or be able to sort the headers of columns for the type palette.  (Heck - which would be too convenient here).

  So... try to reverse this engineer and get there myself.

  There seems to be 2 different pieces of possible orders of the information for the types that I can find.

  (1) order that they exist in the file in sequence if I save it in XML format and begin reading from the top down.

  (2) the specific type typelistordernum

  I have a case where, if I open the pallet type in the sequence editor, I see

  TypeA

  TypeB

  TypeC

  Typed

  TypeE

  If I open the file in the sequence in the text editor, I see

  Typed (typelistordernum 49)

  TypeE (typelistordernum 50)

  TypeC (typelistordernum 51)

  TypeB (typelistordernum 52)

  TypeA (typelistordernum 29)

  The order in the movie file, or the order number of type list seems to dictate the order that they appear in the range of types of the sequence editor.

  I checked that each type in the example are ONLY used in this file a sequence - not shared in any other type of sequence pallets or files of type.

  If I write code to load the sequence file, obtain a reference to it, it cast to a propertyObjectFile and retrieve the TypeUsageList for this file, I get an ordered list that corresponds to the order of typelistordernum.  I can call the MoveType against this TypeUsageList method to reorder the items in the list type and save the file in the sequence.  The next time I open the file in the sequence, the tool retrieves the TypeUsageList for the file of the sequence in question and the order and numbers are the same that I saved the last time, but the order types as seen from the range of types of Sequence Editor is no different (my sorting tool did not help to this point of view).

  All the suggestions here about what is happening, and how can I do feel how the order types is displayed in the palette of type sequence editor, and what I can do to get my types of "sort" I like.

  (1) Yes, you can reorganize the types according to the type via drag and drop. At least since the 2012 version of TS this works reliably.

  (2) the typelistordernum defines the order types are displayed in the view of types.

  (3) you can sort the columns in the view types.

  Maybe you accidentally sorted one of the columns in the view of types and the sequence editor is forgetting that for what you see is actually the order sorted, based on one of the columns.

  I'm sure that drag - move is disabled when you have a sort column so this explains very well what you see. Check your headers to sort for this point of view and make sure that you do not have up and down arrows.

  Hope this helps,

  -Doug

• What is the order to turn off the constraints and index

  Hi, I need to make some out of constraints and indexes on tables to load quite a date in them. I know that I can just drop them and recreate later. But is it feasible to figure who forced and in what order must be do disable or unusable before a load and after the load that is to say. without dropping to preserve? R before P data loading, and then P before R like I think that controls can jump in evertytime and are quite safe to deal with. But I did not carefully think about more, maybe you have some scripts that say exactly what should be the order to turn off the coast and later on this subject.

  Thank you!

  Hello

  946279 wrote:

  Hi, I need to make some out of constraints and indexes on tables to load quite a date in them. I know that I can just drop them and recreate later. But is it feasible to figure who forced and in what order must be do disable or unusable before a load and after the load that is to say. without dropping to preserve? R before P data loading, and then P before R like I think that controls can jump in evertytime and are quite safe to deal with. But I did not carefully think about more, maybe you have some scripts that say exactly what should be the order to turn off the coast and later on this subject.

  Thank you!

  That's right: disable foreign key constraints before disabling the primary (or Unique) key constraint correspondent.  When you reactivate them, re - enable the constraint of primary (or Unique) key before the corresponding foreign key constraints.

  Aside from that, the order should not issue.

• What is the order of operations

  Where can I find the order of operations that are evaluated by the Oracle database? I mean, for example, for a query like this:

  Select an element, rank on (partition of order in...) r

  from t1, t2

  where t1.x = t2.x

  and t2.other_something = 'value '.

  order by 1;

  We can say that: "order by" going to last, "rank" works on lines after that the paintings are "United" and "selected". So in a sense, there is an order of operations. I understand that the actual order of operations when execution can be different if optimizer concludes on an equivalent, alternative execution plan. But what is a sort of operations of op "basic" order Oracle follows "to understand" the request even before trying to understand the alternative form. Is there such a list of order of operations?

  Thank you

  Hello

  946279 wrote:

  Where can I find the order of operations that are evaluated by the Oracle database? I mean, for example, for a query like this:

  Select an element, rank on (partition of order in...) r

  from t1, t2

  where t1.x = t2.x

  and t2.other_something = 'value '.

  order by 1;

  We can say that: "order by" going to last, "rank" works on lines after that the paintings are "United" and "selected". So in a sense, there is an order of operations. I understand that the actual order of operations when execution can be different if optimizer concludes on an equivalent, alternative execution plan. But what is a sort of operations of op "basic" order Oracle follows "to understand" the request even before trying to understand the alternative form. Is there such a list of operations?

  Thank you

  No, I've never seen any kind of official list like that, no doubt because, as you say, the optimizer does not follow these rules; the optimizer has done what he thinks is the fastest way to get the results that you specified.

  It may be useful to imagine things in the following order:

  1. Subqueries
  2. Joins (including the join in the WHERE clause conditions)
  3. PIVOT and UNPIVOT
  4. START WITH and CONNECT BY clauses
  5. WHERE clause
  6. Clause GROUP BY and aggregate functions
  7. HAVING clause
  8. Analytic functions (for example, RANK)
  9. ORDER BY clause

  Again, this has the same relationship to what actaully goes according to the drawings of atoms you see in science books have to the real atoms.  It can help you to remember (for example) that an analytic function (n ° 8 in the list above) may rely on an aggregate function (#6), but not vice versa.

  Yet once, SQL is not a procedural language, and the optimizer does not actually follow a rule of procedure like this.

• What is the order of evaluation of Page elements

  I wonder what the order of execution of the page point assignments are in the page rendering process.
  Sequence (+ region), the Type of items, more skilled checking dependencies?
  I couldn't find anything here, or looked at with the wrong keywords.
  
  I just need to know, what reliable hypothesis on the dependencies between page elements?
  
  Which is visible in the APEX code? A pointer to that would be OK.
  
  Thank you very much
  Thomas

  Hello

  If you have a process 'Automated row fetch', then APEX will fill the session state of all elements on the page where source type = "Column DB" when the process is run.

  All other types of source page point are filled in the order that the elements of the page are rendered.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

  Published by: Patrick Wolf on November 15, 2012 13:47

• What is the order of the film?

  I have all my pictures from 2011 in a single folder.  The film has been in the order that the photos were taken, except that now the photos of 12/24 appear forward, rather than backward.  The metadata says correctly they were taken on 24/12/2011.

  That is what it is?

  Chuck

  Even as the order of the grid, that you can edit in the toolbar.

• Need to correct the order of installation driver Win 7 for Satellite P500 / 01 G

  Hello

  I have a Toshiba Satellite P500 and had to replace the HARD drive after it was abandoned by the son.
  I do not have the recovery disk so I loaded Win 7 image on USB.

  Downstairs, I loaded all drivers but have been thwarted by a number of things.
  The webcam seems to be impossible to run despite trying every difficulty that I could find online and some unknown devices in Device Manager.

  The Toshiba site lists several audio, display and wgich wireless cards, it is difficult to know the correct driver to install.

  I needd a list of appropriate driver and the order they are installed in

  Model is Satellite P500 / 01 G (PSPGSA - 01 G 003)
  Windows 7 32 bit

  See you soon

  There is an easy way to know which device has your laptop.
  Look for the vendor ID and the device id in the pci database.
  How?

  Here, you will get step by step instructions:
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  By the way: Toshiba recovery partition cannot be set manually. It will be created using the recovery disk