What is the solution for no more than space because windows xp files

Similar Questions

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• MS, what IS the solution for the ERROR CODE of 0 x 80240437?

  Looks to me like PERSON DON'T know what the solution to the problem is YET many people say online the fault lies with the last update from Ms.

  I just got a NEW laptop Gateway (NE56R41u) and it comes with bloatware to/from Windows 8.  The store said I need to 21 updates, yet all say that it cannot load due to this error code.
  So if nobody seems to have a solution, should I just sit and fiddle while Rome burns?  My solution is to delete everything that needs updates for and find one comparable application/software other than comparable MS/MS.  To see all the complaints and problems that have been created by the said error tells me that maybe there is no control of the quality at the top when it comes to release updates or solve the error in a timely customs codes.  Some of us have businesses where these codes are an obstacle, perhaps even bad, but no one knows what to do.
  If there is an answer, of course, I'm going to see/read the solution for it.  I'll even write back and say "Alright, it works now!
  I will say that States out constantly updates without checking and adding more noise to its 'small box only enlarges the problem... ".
  It is MY FIRST point in this place and I am disappointed... later, people!

  method 2 worked for me. Thank you very much! Very grateful!

• What are the solutions for remote use unauthorized computer via a virtual private network?

  Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" without authorization.   Called internet provider.  They claim that they do not deal with the configuration of the virtual private network. Tech said there is more than one device connected to my computer!
  I went to "Computer management" and delete all except myself as a user and the administrator.  Obviously, too late as a person UNKNOWN has defined itself as "NT Authority\Authenticated Users".  Locked computer: would not recognize my password.
  Formatted drive / reinstalled windows.  Able to use the computer for "allocation of 7 days; my computer then froze again.  AT and T Tech indicates that UNKNOWN use of my computer and no recourse.  Are there solutions to the unauthorized use?

  Hello

  I suggest you post your question Forums Technet for assistance on this issue.

  Windows XP Service Pack 3 (SP3)

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• whenever I try to send an e-mail via the internet explore the message fails to reach and I get a message saying that outlook windows had stopped working what is the solution for this problem of screen?

  whenever I send a mail via Internet explore, the message fails to pass and I get a saying of window, that microsoft Outlook has stopped working and the system tries to the solution but in vain, no resolution, I need your support online

  Hello

  -Did you change on your computer due to which the question has begun?
  -What operating system is installed on your computer?
  -What version of Outlook and Internet Explorer are you using?

  Suggestions for a question on the help forums

• My computer has sometimes get stopped working and gives message windows explore is restarted, what type of error is this and what is the solution for this?

  my title is best question exlpanation

  Hi risacond,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with Windows Explorer.

  I will certainly help you in this matter.

  Follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• What is the benchmark for Intel WIDI play DVDs on windows media player

  What is the fix to play a DVD on Windows Media Player using Intel WiDi and Belkin ScreenCast, so you can watch it on a TV Vizio 65 "?

  Hello

  As we do not really know details on Setup, see this link:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031069.htm
   
   
   

• What is the solution for write-protected pen drive?

  Hello.

  I using the key USB 8 GB sandisk, but for a few days I can not write or remove something from her, and I couldn't get the option to format my USB. Is there a solution to convert write protected..,?

  The missing information, it is if it is a problem for all USB flash drives or simply a pen drive.

  If it's for all the readers of the pen, there is a policy that can be set in Windows that prevents writing to all readers.  You can check the setting using the gpedit screen:

  Click 'Start'-> type "gpedit.msc" in the engine of search then Ctrl-Shift-Enter

  Enter if requested administrator credentials

  Once the gpedit window opens, navigate to:

  Computer configuration-> administrative templates-> system-> removable storage access

  Make sure that none of the lines of "deny write access...". "are enabled.

  If it's just for your pen drive...  The pen drives storage area can (and does) go bad over time.  (There is a limit to how many write in Flash technology cycles)  When a bad block is detected by the pen drive, it replaces it with a block of a reserve of spare on the device blocks.  When the reserve block on the device are exhausted, then the camera turns in a write protection mode which is the way you say it's time to save what you can and replace this USB key.

  (see also <> http://www.uwe-sieber.de/usbtrouble_e.html#write_protected >)

  HTH,

  JW

• What is the solution for font management recommended for a creative cloud Enterprise Deployment - Design edition (not TypeKit include)?

  We deploy creative cloud on several systems today and this is under the assumption that TypeKit came with all versions. Most of our team has Design edition - no typekit. How do you recommend that manage us fonts? Were using Suitcase Fusion before our upgrade.

  Hi Jill,

  I would like to inform you that Adobe Typekit is an online service that comes with the deployment of user name only. I would say to manage your licenses through Adobe enterprise dashboard that allows the online services for users. Please see the article below for more information.

  Using creative cloud | Create or modify a named license packages

  I hope this helps.

  Thank you

  Ashish

• What is the solution for the problem of mutation

  What will be the best solution or work-around in the event of mutation? Thanks in advance...
  
  Published by: wael amar on April 24, 2010 12:21 AM

  Take a look at:
  http://asktom.Oracle.com/pls/asktom/asktom.download_file?p_file=6551198119097816936

  http://www.java2s.com/Tutorial/Oracle/0560__Trigger/SolutionfortheMutatingTablesProblem.htm

  Greetings,
  SIM

• FF15 - what is the solution for this JavaScript TypeError?

  After FireFox update (15) "JavaScript Application TypeError: cannot access object dead" during private eyebrows: see screenshot http://gyazo.com/c3c6cd95d2574842f9280f7fdd61114b

  Funny D... Just got this error-> Image

  Disabled dragdropupload 1.9.38 and... Hellaluja! So far so good...

  One last question: fact FF auto update checker are looking for updates on the disabled modules?

• What is the solution for: "disconnection is not complete...". We couldn't you disconnect from these websites: Hotmail

  It happens on my wife's account to hotmail signout

  You can delete cookies manually to get disconnected from Hotmail. Hotmail, which leaves a lot of cookies behind anyway even if you connect to. You can search cookies live.com and MSN and msn if you w3ant to cleaning. In the past, it was necessary to enable third-party cookies get logged correctly, but that is no longer necessary for me and activation of third party cookies will give you many additional cookies of all kinds of advertising sites.

• What is the solution for invalid on Presario CQ57-308TU product information

  Invalid product information

  The following product information programmed on the system board is missing

  1 motherboard 00 (a) - product name
  2 motherboard (00 a - serial number of the product
  3. motherboard 00 (a) - product number

   

  Enter-continue starting

  More information visit: \techcenter\startupwww.hp.com.

   

  Hello
  Please contact HP. These values can be restored only in the service of HP.

  How to do? Click on the link below and choose your country:
  Contact HP worldwide

• What is the solution for the error... rundll32.exe is not a valid win32 application

  Please tell me the steps to resolve this error. Thank you

  Hello
   
   
  1. have you made changes on the computer recently?

  Method 1.
  We forst launch a virus online scan. Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm

  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

   
  I hope this helps.

• What are the default programs to use to start a Windows Vista home Premium

  Several programs are running at startup, what is the solution for this.

  Should we indicate programs that must be in the start menu to the top

  try to do a cleanboot following the instructions

  Perform a clean boot Note if the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. Log the computer by using an account with administrator rights.
  2. Click Start
     

     type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

     

     If you are prompted for an administrator password or for confirmation, type your password, or clickcontinue.

     
  3. On the general tab, click to select the Selective startupoption, and then click to clear the Load Startup items check box option. (The box use the Boot file is not available.)
     
  4. On the Services tab, select the hide all Microsoft services check box, and then click disable all.
     

     Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. Click OK, and then click restart.