What is the solution for write-protected pen drive?

Similar Questions

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• MS, what IS the solution for the ERROR CODE of 0 x 80240437?

  Looks to me like PERSON DON'T know what the solution to the problem is YET many people say online the fault lies with the last update from Ms.

  I just got a NEW laptop Gateway (NE56R41u) and it comes with bloatware to/from Windows 8.  The store said I need to 21 updates, yet all say that it cannot load due to this error code.
  So if nobody seems to have a solution, should I just sit and fiddle while Rome burns?  My solution is to delete everything that needs updates for and find one comparable application/software other than comparable MS/MS.  To see all the complaints and problems that have been created by the said error tells me that maybe there is no control of the quality at the top when it comes to release updates or solve the error in a timely customs codes.  Some of us have businesses where these codes are an obstacle, perhaps even bad, but no one knows what to do.
  If there is an answer, of course, I'm going to see/read the solution for it.  I'll even write back and say "Alright, it works now!
  I will say that States out constantly updates without checking and adding more noise to its 'small box only enlarges the problem... ".
  It is MY FIRST point in this place and I am disappointed... later, people!

  method 2 worked for me. Thank you very much! Very grateful!

• whenever I try to send an e-mail via the internet explore the message fails to reach and I get a message saying that outlook windows had stopped working what is the solution for this problem of screen?

  whenever I send a mail via Internet explore, the message fails to pass and I get a saying of window, that microsoft Outlook has stopped working and the system tries to the solution but in vain, no resolution, I need your support online

  Hello

  -Did you change on your computer due to which the question has begun?
  -What operating system is installed on your computer?
  -What version of Outlook and Internet Explorer are you using?

  Suggestions for a question on the help forums

• What are the solutions for remote use unauthorized computer via a virtual private network?

  Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" without authorization.   Called internet provider.  They claim that they do not deal with the configuration of the virtual private network. Tech said there is more than one device connected to my computer!
  I went to "Computer management" and delete all except myself as a user and the administrator.  Obviously, too late as a person UNKNOWN has defined itself as "NT Authority\Authenticated Users".  Locked computer: would not recognize my password.
  Formatted drive / reinstalled windows.  Able to use the computer for "allocation of 7 days; my computer then froze again.  AT and T Tech indicates that UNKNOWN use of my computer and no recourse.  Are there solutions to the unauthorized use?

  Hello

  I suggest you post your question Forums Technet for assistance on this issue.

  Windows XP Service Pack 3 (SP3)

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• What is the solution for the problem of mutation

  What will be the best solution or work-around in the event of mutation? Thanks in advance...
  
  Published by: wael amar on April 24, 2010 12:21 AM

  Take a look at:
  http://asktom.Oracle.com/pls/asktom/asktom.download_file?p_file=6551198119097816936

  http://www.java2s.com/Tutorial/Oracle/0560__Trigger/SolutionfortheMutatingTablesProblem.htm

  Greetings,
  SIM

• FF15 - what is the solution for this JavaScript TypeError?

  After FireFox update (15) "JavaScript Application TypeError: cannot access object dead" during private eyebrows: see screenshot http://gyazo.com/c3c6cd95d2574842f9280f7fdd61114b

  Funny D... Just got this error-> Image

  Disabled dragdropupload 1.9.38 and... Hellaluja! So far so good...

  One last question: fact FF auto update checker are looking for updates on the disabled modules?

• What is the solution for: "disconnection is not complete...". We couldn't you disconnect from these websites: Hotmail

  It happens on my wife's account to hotmail signout

  You can delete cookies manually to get disconnected from Hotmail. Hotmail, which leaves a lot of cookies behind anyway even if you connect to. You can search cookies live.com and MSN and msn if you w3ant to cleaning. In the past, it was necessary to enable third-party cookies get logged correctly, but that is no longer necessary for me and activation of third party cookies will give you many additional cookies of all kinds of advertising sites.

• What is the solution for no more than space because windows xp files

  XP running on six different PCs and a laptop and I have no space on any left all have CCCleaner and no program other than what is required to run the pc hard disk. Windows xp and its updates and patches have taken rooms. I'm available on more than 2% function. If I go to Windows 7 will finish with all the patches, or I add 7 and then delete all the XP patches? Help.

  Hello

  You can try to remove unnecessary files or folders and check. You can also use the disk cleanup tool.

  If you plan to install Windows 7, then you will need to free up more disk space. Also check if your system meets the minimum requirements of Windows 7 system.

  The following article might be useful.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• What is the solution for the error... rundll32.exe is not a valid win32 application

  Please tell me the steps to resolve this error. Thank you

  Hello
   
   
  1. have you made changes on the computer recently?

  Method 1.
  We forst launch a virus online scan. Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm

  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

   
  I hope this helps.

• My computer has sometimes get stopped working and gives message windows explore is restarted, what type of error is this and what is the solution for this?

  my title is best question exlpanation

  Hi risacond,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with Windows Explorer.

  I will certainly help you in this matter.

  Follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• What is the solution for font management recommended for a creative cloud Enterprise Deployment - Design edition (not TypeKit include)?

  We deploy creative cloud on several systems today and this is under the assumption that TypeKit came with all versions. Most of our team has Design edition - no typekit. How do you recommend that manage us fonts? Were using Suitcase Fusion before our upgrade.

  Hi Jill,

  I would like to inform you that Adobe Typekit is an online service that comes with the deployment of user name only. I would say to manage your licenses through Adobe enterprise dashboard that allows the online services for users. Please see the article below for more information.

  Using creative cloud | Create or modify a named license packages

  I hope this helps.

  Thank you

  Ashish

• What is the solution for invalid on Presario CQ57-308TU product information

  Invalid product information

  The following product information programmed on the system board is missing

  1 motherboard 00 (a) - product name
  2 motherboard (00 a - serial number of the product
  3. motherboard 00 (a) - product number

   

  Enter-continue starting

  More information visit: \techcenter\startupwww.hp.com.

   

  Hello
  Please contact HP. These values can be restored only in the service of HP.

  How to do? Click on the link below and choose your country:
  Contact HP worldwide

• What is the max for a storage HARD drive?

  I want to buy an Optiplex 330 or Vostro 200 with 2 GB of ram and dual processor pent.  In addition to the 160 GB that comes with them, I want to be able to add a 1 TB sata drive.  If this possible?

  Mahalo

  Vostro 200

  OptiPlex 330

  
  

• I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do.

  I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do

  Hello

  You can follow the steps below to solve the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  1. click on Start, typeregedit in the Start search box and press ENTER.

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  
  3. If the key exists, go to step 7.

  4. in case the StorageDevicePolicies key does not exist, you must create a new.

  a. right click on the empty field and select new > key.

  b. name the new key as StorageDevicePolicies.

  5. turn on highlight StorageDevicePolicies, and then create a new DWORD called (32-bit) as WriteProtect.
  6. double click on WriteProtectand set its data value to 0.

  7. If the key already exists, double click on WriteProtect and change its value from 1 to 0 to allow write access.
  8. exit the registry editor.

  Check whether the problem is resolved.