What is the status of the network

Similar Questions

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• What is the network access Protection Agent and when should it be on?

  It seems to be disabled by default in the Action Center Security Section.  What does if it is turned on?

  Hello

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer. By default, the startup type of Network Access Protection (NAP), agent service is manual under services.msc.

  See also:
  What is the network access Protection?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-access-protection
  Networking of information that it pros

  http://Windows.Microsoft.com/en-us/Windows7/networking-information-for-it-pros

• What is the network access Protection?

  What is the simplest and most effective way to protect a home/business wireless network? (Other than WEP or WPA encryption).

  Hello RickMetta,

  Thanks for your post.  There are many methods that can help secure your wireless network.  Take a look at some of the literature that I've linked below:

  http://www.Microsoft.com/windowsxp/using/networking/security/wireless.mspx

  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  http://TechNet.Microsoft.com/en-us/network/bb530679.aspx

  See you soon

• PC laptop Pavilion 17: what is the NETWORK card in the Pavilion 17?

  This machine is my daughter-in-law. She had a HD crash & replaced the HD. She bought Win 7 Pro 64 bits/load

  on the new HD. I got all operational except for the network card.  I need to load the drivers for the NETWORK card, but I can't find any explanation as to what is the make and model in this machine.  News machine below:

  Model 17-e049WM

  Product E0J75UA #ABA

  SER # 5CD3201PVG

  SYS COUNCIL 1984

  Looks like it's realtek, both wireless and NIC manufacturer. Although the model of the NETWORK adapter is not available, you can download these drivers from here

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&PFID=4&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  or here at HP.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63396.exe

• What is the network latency acceptable in milliseconds for users on a WAN to come?

  I heard number as 125ms being a number to shoot for VDI and good user experience, but what is the number of the real world?

  Acceptable latency is the right number until all of your users start to complain that this document, http://www.vmware.com/files/pdf/view/VMware-View-5-PCoIP-Network-Optimization-Guide.pdf, said shoot for less than 250 ms.

• What is the "network error occurred" on the blu ray

  What is "network error has occurred", when you try to open Netflix and other applications

  I was also getting the problem of "a network error occurred" on my BDP-S590.

  I have read many solutions complicated this same question in this and other threads. And so I tried the very complicated (manually setting IP and DNS) proposed solutions without success.

  I went to http://esupport.sony.com and used the chat feature. "Levy" was good enbough to do this VERY simple solution:

  1. turn off the Blu Ray player

  2. unplug the power cord of the player blu - ray of the socket.

  3 plug the power cord into the power outlet.

  4. turn on the blu - ray player.

  5. check if the problem is resolved. (It was for me).

  Hope that helps...!

• Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I don't know anything. What is - this and how?

  Original title: computer not identified on the network

  Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I know nothing on my network. What is - this and what that can do. ?

  Implement the security of your network... How to do depends on details. If your network is at home on a wifi router, and then implement WPA2, which will prevent unauthorized as well as encryption of your data access.  Follow these steps on the router itself (once again the details depend on your situation.)

  While I'd love to implement WPA2, WPA2 will not accept my network and I am limited to WPA.  My point is that if it is a wireless intrusion (we don't even know if it's wireless at this point), then the security settings on the router must first be discussed with the manufacturer ISP or router so that they are appropriate for devices and services and programs.

  It could also be a USB transmitter attached to the computer.  It might be the malicious program or a problem with the firewall or a real hack of the computer through the firewall or caused by malicious software (even if you use cables or wireless).  It could be the entire network (but the number of computers which implies) or only this one computer.  It could also be a system service using the network and not really another computer in itself (in office what he says and where - some may be difficult to recognize and interpreted as another computer).  There are many possibilities.  We do not know what the warning generation program or what he says.  More information is needed.  I would also like to work on it - and it can follow to her new home.

• "I get a message when troubleshooting my message" printer does not "on my screen, it says"contact the network administrator. What does that mean?

  I think that the port of my computer does not accept my printer

  Hello

  (1) what is the brand and the model number of your printer? In addition, how the printer is connected to your computer?

  (2) is on a network or locally connected?

  (3) what operating system is installed on the computer?

  (4) when this printer worked very well for the last time?

  (5) where to get you the message printer does not, it is while printing a document or by pressing any button on the printer?

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.
  Note: The following troubleshooting applies for the Windows 7 operating system.

  Method 1: Run the printer Troubleshooter
  Name, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. below "Printing on the following ports" section, select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  I hope this helps.

• What is the use of the field status ACS 5.3

  whose status is disabled manually don not struggle to authenticate users and access management of network devices. which makes me wonder what is the difference between the enabled and disabled state?

  Thank you

  Kerim

  Kerim,

  I can't work Ray the way he used to in acs4.2. It's as if the RADIUS is dedicated to default network rather than deault network admin access.

  You're right, the default network access model is for authentication radius based, cannot assign a profile shell since it is of Ganymede... When you create a new access service - it uses either a model Ganymede or radius.

  even when I left RADIUS default netowrk access, I was not able to associate the profile shell, which allows private-level 15.

  Make sure your authorization profile has the right assigned cisco-av-pair (shell: priv-lvl = 15).

  GBA 4.2 If you're admin group u just see # switch invited him but ACS5.3 If you use RADIUS you switch > prompt.

  If you pass the attribute above make sure that the 'radius of group by default aaa authoration exec' command is configured

  How can I solve this? the other problem that I am facing is, when my two instances of the acs are autonomous, they work fine, but as soon as I do one of their secondary, secondary education cannot authenticate to server RSA he just authenticates users the only. whay is it? I think that if we can solve this am ready to go into production with 5.3.

  I see no reason why this is the case right now the top of my head. Your best bet for this problem is to open a tac case to install a webex and take a look. I'm sure it's something simple, but webex is the fastest method because all the parts it takes to do this job.

  Thank you
  

  Tarik Admani
  * Please note the useful messages *.

• What keeps visible Hello on the network printers?

  Hello

  We have problems with a certain printer, which became visible many, many times on the list of visible printers on the network. OSX users still about 100 of these lines, which represents a single printer. Who is plugged into half a day already. It looks like this:

  

  How to get rid of this...? What keeps this list life anyway? Other Mac computers on the network? Judging by the documentation of this HP, I'm not alone. But it is not explained how to solve this behavior. Any suggestions?

  It is the result of a Bluetooth peripheral malfunction on the network, most likely the printer itself or a third-party router with incompatible settings or firmware. Restart the router can help temporarily. Otherwise, check with the manufacturer for support.

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• ConfigFree network traffic meter - what do the bars?

  What does the bars up and down the network traffic meter in the configfree SP2 version?

  Hello

  Unfortunately, I m not sure what bar do you mean but the ConfigFree includes a feature to help clean with lots of useful information and helpful tips.
  Please start the Configfree and press F1. Now, aid should start.

• Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

  Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

  What should do?

  All you can do is to try to circumvent some of the bugs crawl into El Capitan.

  Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

  Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

  Wait a minute

  Turn on the modem first and let it run by itself for 2-3 minutes

  Then, switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Recheck the AirPort Utility

  If still no luck, we will have to try some repellent on Mac.

• What is the nodes of wireless sensor network measuring to measure: 4-20mA, 0 - 10V and Pt100?

  I'm looking for a wireless sensor node to measure:

  -4-20mA signal

  Signal - 0 - 10V

  -Pt100 signal.

  What is the node position OR better.

  Best regards

  Alioscia

  Hi alioscia,.

  For all of these measures, you probably better off using an NI WSN-3226 if you want to measure all parameters in one place. You can use a shunt resistor and apply the Ohm's law to calculate the measure 4-20mA.

  See you soon,.

  Brian has

  R & D Product Support Engineer | WSN/network DAQ/University

  National Instruments

• What is a source valid and display it for the installer of the network of NIVLM 2.0

  Hello

  I am trying to create a version of Labview, Labwindows CVI and the last Measurement Studio 8.0 installed network.  Now, when I started the network in the menu Setup options NI Volume License Manager 2.0, I select the Browse button select the CD Source and I select Browse to select the directory that contains the package created. By clicking on NEXT shows an error message saying: select a valid source and the how to Setup network.

  Can anyone tell what a directory source and how valid or where I can find answers to this problem?

  thnx in advance

  Ruud Habets