What is windows newdreg.dll

Similar Questions

• What is error code--c:\windows\ipajahoz.dll

  I have a Dell with windows xp. What is error code--c:\WINDOWS\ipajahoz.dll?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• What is dkbjausr.dll - Rundll error loading: module specific C:\windows\dkbjausr.dll is not found

  When I boot Windows XP Professional Service Pack 3, I get a message:

  Rundll

  Error loading:

  C:/Windows/dkbjausr.dll

  Specific module could not be found

  Message is in a box with an "OK" button I click and the normal desktop screen.  Everything seems to work normally, but I noticed that IE 8 does not have certain things with other programs she before the above message.  IE 8 work, but some features are gone on some programs that run on IE8.  (but the functionality is there on firefox)

  What the heck is this message and that is that windows could not find the module?

  This kind of errors are usually because the registry trying to load a module/file that no longer exists, in your case, the "dkbjausr.dll".
  The file has disappeared, it is of a random filename probably against malware that had already removed the scanner, but the loading point is always present in the registry.

  Everything you need to do is remove the point loading, either by editing the registry or by using tools to remove.
  Try to uncheck the corresponding item in msconfig > startup.

  Or if you have the HijackThis program is installed, you can run it and difficulty of the relevant boot entry pointing to this file.
  http://free.antivirus.com/HijackThis/

  If you are familiar with editing the registry, here's the Startup registry keys:

  Just delete the value that points to the C:/windows/dkbjausr.dll

  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  HKCU\Software\Microsoft\Windows\CurrentVersion\Run
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnce
  HKCU\Software\Microsoft\Windows\CurrentVersion\RunOnce
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnceEx
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunServicesOnce
  HKCU\Software\Microsoft\Windows\CurrentVersion\RunServicesOnce
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunServices
  HKCU\Software\Microsoft\Windows\CurrentVersion\RunServices
  HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  HKLM\Software\Microsoft\Windows Winlogon, Userinit

  There are other tools that remove entries redundant reg, let me know if I can be helpful with your Hijackthis log.

• What is this C:\Windows\ubomupewukuwu.dll file?

  What is this C:\Windows\ubomupewukuwu.dll file?

  I guess you ask because you get an error message at Windows startup on this file...

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• When I restart my computer, I get this message error loading C:\windows\pxtdmap.dll, what should I do?

  Error loading C:\windows\pxtdmap.dll, what should I do?

  Hi Nancy,.

  The error message says anything else? Just, based on

  "C:\windows\pxtdmap.dll", I am unable to find a possible solution.

  The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?
  http://support.Microsoft.com/kb/308427
  It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error?
  http://support.Microsoft.com/kb/306084

• What does say, load error, c\windows\otibhct4.dll?

  everytime I open my computer a Rundll message appears error loading C\WINDOWS\otibhct4.dll.  Is this something that I need to fix and how do I solve this problem?

  It is always sensible in this situation to achieve a malware check

  Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

• Noise - HHCTRL. OCX occupied an address box reserved for Windows system DLLS

  OK so I have a satellite phone and since yesterday, whenever I turn on my laptop, I get this message: -.

  RTHDCPL. EXE - repositioning of unauthorized system DLL
  DLL user32.dll system was moved in memory. The application will not work correctly. The move took place because the DLL C:\WINDOWS\system32\HHCTRL. OCX occupied an address box reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL

  So, I sat like 1 million bulletin boards etc. and not got anywhere. I'm normally ok with computers, but this time I confess that I have not the slightest idea what to do. It of really bugging me, can anyone help? Some message boards have taken me to a link on the Microsoft Web site to download something, but it says you must have windows XP service pack 2 and honestly, I have no idea and do not want to download something to totally screw up my laptop! (ok, maybe I'm not very good with computers!) Also, I found a site telling me something to do but I had no idea where to go or anything! I need someone to tell me EXACTLY what to do to get rid of this really annoying message. Also some sites say that when you press 'OK' another message appears, mine isn't it just goes!
  Please help, has soon x

  Please do not post new discussions on the topic that were discussed here in the forum. I always recommend looking before opening the new thread.

  Then please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  This problem occurs because Microsoft released a new patch for the closure of a breach of security in Windows Internet Explorer.
  But this patch has a bad influence on the Realtek audio chip.
  That's why Microsoft has released a patch to fix the old fix. ;)

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Whenever I reboot I get the following message: error loading C:\windows\claprv.dll

  Whenever I reboot I get the following message:

  Error loading C:\windows\claprv.dll

  the specified module could not be found

  What does that mean?  The only thing that I found online, it is that it can be associated with some malware?

  Any ideas?

  Hello, Rojo97,

  You have something to do with skiing?  This site uses claprv.htm.  You will get a 404 error page not found but the site is active.

  http://www.Sloski.SI/resources/files/PDF/alpsko-smucanje/04-05/FIS/alp_claprv.htm

  Have you added new software to your system recently?

  Download Microsoft malicious software removal tool run a complete analysis

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

• error windows\ebodemaw.dll

  After starting I get errorloadingc:\windows\ebodemaw.dll

  Hello

  This looks like remaining associated malware (probably Trojan.Hiloti variant) in the run key of your registry charged through rundll32.exe
  You can manually disable it via msconfig > Startup tab. In the list, you should find a reference pointing to the ebodemaw.dll file. The displayname property is also random. Just uncheck that one, so there will be no more startup with windows.
  Or you can delete this value in the registry under the HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key. Normally, it should be there - otherwise, it is under the HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key, but since I suspect a Variant Hiloti rest here, it should be under HKLM.

  But I suggest instead of using msconfig here rather as tinkering with the registry is always a risk.

  What in any event, the actual file (ebodemaw.dll) is already gone, otherwise you would not get this error after startup. So it's just an orphan entry in the registry causes the error.

  I hope this helps.

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• c:\windows\axutunag.dll is not found

  I get this message box when I start my laptop Windows XP 32-bit.  In the message "RUNDLL" box - 'c:\windows\axutunag.dll is not found.  What is the axutunag driver, and how can I fix this error?

  What is the axutunag driver, and how can I fix this error?

  axutunag.dll is not a system component that should be running everything from windows...

  If there is anything that touches on axutunag to system tray boot disable it...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/
  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then look for the .dill file you have described here and delete this key...

• I get "RUNDLL error loading C\Windows\arelasiwitafabiz.dll." when I start my system.

  Original title: my first RUNDLL error.

  At startup, there is a small window on my desktop saying RUNDLL error loading C\Windows\arelasiwitafabiz.dll.

  It disappears if I click OK, but always returns to the start. I downloaded a couple of registry cleaners; It is on the advice of the other forums, being a registry patrol, but I later read this was a suspicious program, so I removed it. In fact it seems to be a large number of suspects in programs offering assistance, so now don't know what to do. Finally what effect an error RUNDLL has on a computer. Any help please

  The 10 landfills, three were from 2009 so I don't check those out.  Four were on 8 June, two of 14 may, and one from May 17.

  Finding bugs were IRQL_NOT_LESS_OR_EQUAL (4) or INVALID_WORK_QUEUE_ITEM (3).  INVALID_WORK_QUEUE_ITEM bugs were all attributable to the sunkfilt.sys on December 8, 2004 - the "USB driver for the 6 in 1 media card reader" (your system is a HP?).  The suggestion would be to update the driver, or off the device if you do not use.  Finding bugs IRQL_NOT_LESS_OR_EQUAL were of same and all inconclusive - not irrefutable.

  I would say that running chkdsk, and if you have a disk XP,SFC/scannow [Moreover, this], starting with.

• I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

  I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

  C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

  As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

  What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
  You could also disable the offending boot entry via msconfig > startup if it shows up there.

  Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
  04 entry in the log from hijackthis should look like the example below.

  "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

  O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

  http://free.antivirus.com/HijackThis/