What it means to ISP fees may apply?

Similar Questions

• I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.

  It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.

  So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.

  http://en.wikipedia.org/wiki/S.M.A.R.T.

• I got the error code 646 on uninstalled updates. Does anyone know what this means?

  What is called NVIDIA GeForce 8300GS tried to install something on my computer yesterday.   He ruined my size and audacity of things on my computer.   When I am gone to see if it was of Micorsoft I discovered that I'm not getting their fixes is installed on my computer since May.   I got an error code today for 3 correct code 646 was, but I don't know what that means?   Is that what someone else has this problem and is there a solution for this?

  Vicki M

  Screen resolution:

  ·

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Error 646:

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• [Error number: 0x8024400A] trying to download SP 3 for XP, the error code is returned. What it means?

  [Error number: 0x8024400A] trying to download SP 3 for XP, the error code is returned.  What it means?

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.Microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• XP on a Dell computer. A bar just to appear at the top of the desktop with the word 'config' inside screen. Everything seems to work. -What this means and ho can I get rid of him?

  This bar has appeared without reason, said "config." Through the top of the screen when he's at the office. Everything seems to work, but may not know what it means, what caused it appear, how to get rid of him.

  Hi Mike_ffhs,

  ·         Exactly when you receive this error?

  ·         What is the full error message that you receive?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  See the article below for the procedure safe mode in Windows XP:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  Step 2: You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

   

  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Fatal error in WMI. What it means and how to fix it?

  I tried to do maintenance on my computer. However, I get the following message: cannot access the Windows Management Instrumentation software. Management of Windows files may missing or moved. I don't know what that means and I don't know how to fix it. I know that my computer is running like * now.

  If you see a message like this:

  Unable to access Windows Management Instrumentation software.  Management of Windows files may be displaced or missing.

  Either the Windows Management Instrumentation Service is not running or your information from WMI files are missing or damaged. It is easy to rebuild the WMI information files and replace all the files corrupted or suspicious.

  To solve your problem, stop the Windows Management Instrumentation service, rename the folder WMI suspicious or distressed, then restart your system.  When the system restarts, the WMI service will start automatically and rebuild the WMI folder and it's content automatically.

  Here's the process:

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services applet.

  Locate the Windows Management Instrumentation Service.  If the status column indicates that the WMI Service is started (ongoing), right-click on the WMI Service and choose to stop the WMI Service.

  Answered in the affirmative, if requested to stop Security Center and Windows Firewall Services (with stopped services, your system is vulnerable to attacks from the Internet, so do not receive is not on the Internet again until you reboot your system).

  Now would be a good time to check also the properties of the WMI Service to make sure the startup type is set to automatic for the Service WMI will start automatically the next time the system is restarted.

  The Explorer, navigate to the following folder (assuming that your boot drive is C):

  C:\Windows\System32\Wbem\
   
  Locate and then rename the folder "Repository" to something, as you remember, such as:

  Repository.Old

  Restart the computer, and then make sure that the WMI service is restarted automatically and that a new repository folder has been created to replace the one that has been renamed.  It may take a while to completely rebuild the file storage (several seconds or minutes) so expect it ends.
   
  After the reboot, you will notice the wmiprvse.exe Service running in the Task Manager and it will continue to run until it completes the reconstruction of the repository (this may take a little time).

  The rebuilding process could take several minutes depending on your system, but eventually the wmiprvse.exe Service ends and disappear from the Manager tasks.

  If you then look at the Event Viewer Application log, there may be some error messages like this:

  Event type: error
  Event source: WinMgmt
  Event category: no
  Event ID: 4
  Description:
  Failed to load C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V4.0.30319\MOF\SERVICEMODEL MOF. MOF by retrieving the file from the repository.

  This is normal because when the system restarts, the wmiprvse.exe process has to rebuild parts of the repository as well. It is a mistake to sequence as shown below. You should not see these mistakes again after the system has been rebooted and catches up and finishes rebuilding the WMI repository.

  Explanations for errors encountered in the case of the Application of visualization of the newspaper the WMI repository is rebuilt:

  Explanation
  Windows Management Instrumentation could have tried to compile the file (mofcomp) a .mof marked for ASR, but compilation failed. This is probably due to a sequencing problem.
     
  User action
  To correct the problem, try to compile the .mof again. If this does not resolve the problem, contact the provider of technical support for the program in question.

  You shouldn't need to do something about these error messages and do not see again them after that XP has finished rebuilding the WMI repository.

  I can't say how long this will take to rebuild, maybe 10 to 15 minutes until it settles completely.

• at line 0 stack overflow - what it means?

  I get a message that says "in line 0 stack overflow" what this mean and should I be worried?

  It means that whatever program is currently running has been a mistake and crashed. Because you forgot to tell us what you do or what program you are using when you get this error, which is also says I can get. If you want targeted assistance, these links are a good guide for your next post:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question
  MS - MVP - Elephant Boy computers - don't panic!

• execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• 'Test latency error' what it means and how to fix it.

  I've tried to do a test of broadbandspeed and in the attempt, I was told, there was error, namely "latency test. -What it means and how to fix it?

  Was it speedtest.net?

  If so, this see from their base of knowledge ( https://support.speedtest.net/entries/21544197-What-does-Latency-Test-Error-mean- ):

  «"Latency Test error" occurs generally when the server has been temporarily interrupted.» We have a server monitoring group that will be contacted periodically servers to verify that they work correctly, but there may be a slight delay before automatically recognize us that the server is down. Please let us know by filing a support ticket specifically identify which server caused the error and try to test it on another server. »

  If it was of speedtest.net, then try another Tester like http://www.zdnet.com/broadband-speedtest/ for example (there well others).

• '400 bad Request nginx/0.8.55' appears when I'm on E - bay. What it means. It seams to slow down my computer when it pops up.

  This appears when I'm on E - bay.  What it means.  It seams to slow down my computer when it pops up.  How can I fix it.

  Thank you
  Bill

  Hello

  1. is this problem limited to the ebay site?

  2 have you made changes on the computer before this problem?

  3. What is the error message or an exact error code?

  4. what version of Internet Explorer is installed on your computer?

  If you are facing this problem while browsing with Internet Explorer, then I suggest you to try the steps in the following Microsoft article and check if this may help.

  Can't access some Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/967897

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope the information is useful.

• Anyone know what this means?

  Hello experts.
  
  in projects handed to me; I'm supposed to come up with a report where the purchase cost and Budget are compared... Passing by the sample reports, under criteria I checked the formula column, and here is what I saw...
  
  
  ' http://svkcsqldev/ReportServer/Pages/ReportViewer.aspx?%2fABC%2fOBI%2fABS+Activity & rs: Format = EXCEL & RC = false & SalesList =' | Sales ". Sale number ".
  
  Anyone who has any idea what that means... I'm new to the business, so this me freaks out:
  
  Edited by: 994621 may 3, 2013 11:42

  Here is the URL complete after framing, looks like that's not a valid url. I don't think it's related to the BI!

  http://svkcsqldev/ReportServer/pages/ReportViewer.aspx?/ABC/Obi/ABS activity & rs: Format = EXCEL & rc: parameters = false & SalesList =' | Sales ". Sale number ".

  / Activity OBI/ABC/ABS & rs: Format = EXCEL & rc: parameters = false & SalesList =' | Sales ". Sale number ".

  This would indicate that the report will show in Excel format for the data

  Sales ". Sale number ".

  Mark correct/good

  Published by: Srini VIEREN on May 3, 2013 14:35

• What exactly means "charge USEFUL?

  What exactly means "load USEFUL." ??? Please help me with simple examples and the process of BPM.

  Hello
  1. you will have a charge separate for each item in your process. There may be some additional attributues that each task may need. If possible put them all in one single load .xsd file itself. Then use specific fields for a specific task.
  Putting them into word doc will not help with the exception of your documentation. They are all should go into the under your composite/xsd file .xsd file.
  Even if you have the script task, you should always put all fields for this in xsd or xml format only.
  When you build a human task, means that you drag and drop a human task on a process. Then, double click and for the setting and click + to add a new task and this is where give you payload.

  A friendly suggestion is also a large part of the theory will be complicated especially for soa/bpm applications. I would recommend with this understanding you begin practice as with Hello everybody or or simple examples of online. In this way, we can understand both theory and see how this is implemented. I don't want to confuse you with the theory more. Then, start with the actual sample and if you have any questions, then we can take it from there.

  The sample will give about all the details. I don't have any right now. But google around you should find some.

  Thank you
  Ravi Jegga

• What does mean by "< < my_label > >.

  Hello my dear all,.
  
  I want to know, what is the average by * < < label > > * in PL/SQL. Many examples of procedures and forms, I read it but could not understand what it means
  
  Here is an example.
  
  DECLARE
  pe_ratio NUMBER (3,1);
  BEGIN
  DROP statistics symbol WHERE = "XYZ";
  SELECT price / NVL(earnings, 0) IN stock pe_ratio
  WHERE the symbol = "XYZ";
  + < < my_label > > +.
  INSERT INTO stats (symbol, ratio) VALUES ("XYZ", pe_ratio);
  END;

  The < < Label > > is used with GOTO. Http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/goto_statement.htm#LNPLS01323, see especially the links to examples at the bottom of the page.

  GOTO should be avoided as much as possible, because it is not "structured programming".

  BTW, your query should be displayed in {forum: id = 75}
  Kind regards

  Published by: Amélie on May 23, 2012 11:08

• Tracks with a star - what it means?

  I know the meaning notes have been removed, but a few songs at random by the album has a star next to them, now that I have updated to iOS 10.0.1. Anyone know what they mean and how

  The star simply means that the "popular" titles

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.