What kind of fields / widgets are used in the Application Permissions screen?

Similar Questions

• Where can I find what kind of phone charges are compatible with the CMF?

  I've recently updated one of our CME to CME v10.0 systems

  I noticed that even if CMEv10 the Firmware support page shows how compatible phone for my 7911 phones is 9-2-1TH1-13,

  My 7911 running load phone 8-4-3-16 that all seem to be save and it works very well.

  So I must conclude that 7911 phone charging 8-4-3-16 is compatible with GCE v10.0

  Where can I go to find out what kind of phone charge versions are compatible with GUY or perhaps, at least, where I can find loads what kind of phone are no longer supported by a version of the CME?

  Hi Jared,

  Specific versions of CMF are tested with the versions listed on the doc "requirements" as you mentioned (linked below), but are not limited to these versions of firmware. The phone charges/firmware is completely independent of the CME/IOS version. And it is often appropriate to upgrade or downgrade the firmware of the phone on CME levels and is fully supported :)

   
  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/requirements/guide/c...

  I would look at the upgrade of the firmware 8-4-3 for the 7911 BUT you need go to an intermediate version of the midpoint as 8-5-2 at first because of the "important notes" below;

  Questions for SCCP firmware update

  Note for all the firmware updates SCCP firmware version versions prior to 8.3 (3) for version 8.5 (3) or higher, you must first upgrade your firmware to version 8.5 (2). Once you have upgraded to version 8.5 (2), you can upgrade your IP phone to version 8.5 (3) or later.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/firmware/8_5_3/English/release/notes/7900_853.html#wp57602

  See you soon!

  Rob

• What type of LKM, IKM modules are used in the scenario of perticular?

  Hello

  I doubt, what types of modules are used in the scenario of perticular. For example, I created the FILE interface of FILE FLAT DISH.

  for this I imported LKM FILE SQL and IKM SQL to ADD the FILES of modules. Executed successfully.

  I want to know on "what kind of modules are I have to import, when I try to connect a DB to different DB, flat file DB, flat file to DB etc.

  Please send me any document.

  Thank you and best regards,

  A.kavyakumari.

  Have a look on the following document, a bit old but still is a good overview of most of the widely used available KMs

  http://www.Oracle.com/technetwork/TestContent/oracledi-km-reference-130306.PDF

• No matter what kind of program that I use or what printer I print on, my PC has produced a preview before print screen every time I click on print. Anyone know how to disable this option?

  No matter what kind of program that I use or what printer I print on, my PC has produced a preview before print screen every time I click on print. Anyone know how to disable this option?

  It doesn't seem to be anything the given that this happens no matter what printer print on the printer. Any program, I use the same thing also happens.

  Hello

  Apart from the valubable solutions provided, I suggest that you post your question on the TechNet Forums as it appears, it comes to your work computer.

  Windows XP IT Pro

  Thank you.

• What kind of filter/effect is used in this vid?

  what kind of filter/effect is used in this vid by Björk about 0.26 s https://www.YouTube.com/watch?v=M1Wwbw2gCcA

  Find edges and CC Vector Blur with settings excessively overcranked will give such a look. Additional blur before the operation to find the edges may be involved, and of course to get multiple lines of 'height' you will work in 8 bit in support of quantification.

  Mylenium

• What kind of Windows 7 software to buy - the most economical cost - to have Windows 7?

  We have an old PC (2007) which has Windows XP, but then a year ago, Microsoft had a special price on Windows 8, I bought and installed friend.

  He had a license from Microsoft. I grew up hating Windows 8 until I want to put on Windows 7, like our other PC. What kind of Windows 7 software to buy - the most economical cost - to have Windows 7?

  Original title: installation of Windows 7

  More affordable Windows 7 licenses are licenses OEM System Builder. Though aimed at systems integrators, they were just find as regular retail licenses and as you would do a custom, Setup anyway, would simply find your scenario.

  What is different about the OEM System Builder licenses:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  Apart from that, there's not much else that prevents you from using it.

• Preceded by scenarios * are used in the optimization reports

  Can anyone describe the procedure since the capacity Planner dashboard to attach a custom script to run with the progress report, the synopsis and evaluation reports.

  I see that only scenarios preceded by * are used in the optimization reports, but I can't understand how to map, one of my scenarios customized to these reports. Thanks - Jeff

  Jeffoutwest,

  Unfortunately, this is not possible.  These optimization reports are 'canned' and while you can change certain things about them (via the reports... Settings menu of optimization reports), you can't let them use one of your custom scenarios.

  Kind regards

  Toby

  Consultant Senior PSO

  Advaced Services

  VMware

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• How do I know which extracts are used in the sequence

  Is there a way to tell if the clips in your project Panel are used in the current sequence? other than will for throughone search options. Can I somehow insert a column in the project Panel that would have activated, use the clip?

  Thank you

  Look in the Panel project to "use video" or "audio".  It will tell you the number of times that a clip has been used.

  The mouse click on the arrow next to it, and it will tell you the sequences in which it was used.

• Among application components are missing from the Application directory, please reinstall the application.

  Among application components are missing from the Application directory, please reinstall the application.

  Hello

  Please use clean tool to uninstall the application-

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

  see the help document for install it again-

  https://helpx.Adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  You can also check I get a message "among application components are missing from the application directory, please reinstall the application. .

  I hope this helps!

• After you have reinstalled Photoshop CS5, among the components of the application are missing from the application directory. Put it back, didn't work

  After you have reinstalled Photoshop CS5, among application components are missing from the application directory. Reinstall the application does not work.

  UINSTALL cs5, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• I want to insuscribe because I do not use of the applications. Thank you

  I want to insuscribe because I do not use of the applications. Thank you

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• Photoshop CS5, I get the message: some application components are missing from the Application directory, please reinstall the application.

  Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.

  Can I get these downloaded components that my optical drive is broken.

  Download the CS5 products

• What kind of code do you use to switch to a new/next screen?

  Greetings,

  I worked with CC animate and a bit of ActionScript 3.0 for about a month as part of my study IT. As part of my final project for this course animate CC, I chose to create a Visual Novel game. Basically, the idea is that you can see a screen, you click an option to 'talk' (like "move to your home" or "the city") and clicking on an option translates in the transition to a new screen (with a House/town as a background image).

  Unfortunately, I don't have to do all assignments in the past involving "screen switching", so I have no idea as to what kind of code I need to make this work. Google for it, without success. So now my question is, what kind of ActionScript 3.0 code/functions/etc. to apply to just "switch to the next screen" host in a selfmade in CC game?

  Thanks in advance,

  Sander

  I assume you are using the calendar to develop each of these individual screens. You probably use the stop(); order to keep the playhead on the frame where the first decision point, the screen of your option. You will need for each of the options create a badge and join some Actionscript to the keyframe where the point of this decision.

  Here's a good tutorial for this kind of thing: creating a site Flash (AS3 Version)