What makes an image show a rectangle

Similar Questions

• What makes an image of SSD instead of OKR

  The OKR feature seems to create a lot of problems if you upgrade and installation of Windows 7 teacher instead of the supplied Windows Home Premium

  Has anyone used Acronis True imager or any other softawre to image the msata SSD and use it again?

  Yes, it can. Make a backup of the current system of a key recovery.

• What makes the image stick to one element of a film zoom

  Hi all

  I'm just getting started with Adobe After Effects and have met a big challenge for me now.

  I have a very short film http://www.youtube.com/watch?v=SqG6yLnzBR8 & feature = youtu.be and a small thermostat on the wall.

  The thermostat becomes bigger and bigger, at the same time circling. My task is to add a logo of company at the bottom of the thermostat.

  Of course the logo must stick to this thermostat and the circle with it so that nobody notices that its a layer applied.

  Is it possible to achieve this with 3d without the camera approach mode motion tracker? Only in mode "Track Motion"?

  "P.S. mode camera approach is not available because I get analysis resolve failure screen when I try to start the function of" trail camera.

  It's really frustrating, I tried to convert avi to any other format without result ;/

  Thank you for any piece of advice.

  There not enough detail in this one for camera tracking and is not what you want anyway. Inside of AE the way to achieve this is to start at the end, turn on tracing, select corners of follow-up, and follow back until the track fails that the thermostat is reduced. You will have an image full screen transparent which has the logo of the company exactly in the right place. You apply the corners followed by the logo and it will not break in the right place.  As the camera pulls back and the track becomes unstable fix you a point in the layer and use transparency keyframes to reveal the logo.

  What should be done is a texture applied to surface of th the thermostat inside the 3D application that was used to create the shot.

• What makes an image of 'fit' in another original image

  I'm not sure of the terminology although diffuse comes to mind. I have an image that was given to me by my client that he wants to ride in the model that I turned into a Web site, he buys. I can mount the image inbetween the layers where I want, but I need to get rid of the 'square' or edge RAM of it. Y at - it a filter or technique to apply to the images to obtain different looking edges?

  Thanks a lot for your help!

  deleted by me

  Sorry, there is a tool edge refine under Select. Draw around your selection, select the tool, we can see the feathers on the options bar choose how many feathers you want then click on refine edge. You will need to play with the amount of the pen at your convenience, of course.

• What makes a JPEG open in ACR?

  Working in a print Lab receive us files from all kinds of sources.  Some JPEG files we get seem to automatically open in ACR, some go directly into Ps when double clicked (PC).  Does anyone know what makes an image open ACR?  Even if I "prefer ACR" turned off in the Ps, the file continues to open in ACR.  This is a problem is because the setting that makes the customer in ACR is not be saved/applied to the jpeg file.  Submitted clients file, prints were too dark, customer increases the brightness + 20 in ACR and resubmitted JPEG files.  But when we print they look like the first batch.  When I double click on the file, it opens in ACR and I can see the brightness + 20 but when printed is not there!  Anyone have an idea what might happen?  This is the way that the customer saves files to ACR?  Could this be just a wrong action?  Thanks for all your comments!

  If a customer changes a jpeg file in ACR, and then click Done to be opened, the changes are saved as tags in the JPEG exif data; No changes are made to the data in the jpeg image.  If you wish to honor edits ACR of the client, you will need to open the JPEG in ACR and Photoshop and print from Photoshop or save the file in Photoshop.  Photoshop is the only app that will honor the exif tag changes.

  Added by edit-the reason for which I repeated the info is I predict it happens more often that customers with a jpeg workflow "discover" how it is easy to change the the white balance, brightness, contrast, cropping, etc. within ACR and must never mud round in Photoshop.  It is very easy, just click 'Done' when they are editing, instead of going to the pain to save it under a different name.  And Adobe did a wonderful job of explaining all the consequences, IMO.

  Richard Southworth

• How can I make the image that is within the rectangle to move?

  Hi, I'm doing a Web page with muse and I found the Coffee pastries Katie page. There are some pictures in the home pages this movement inside the form when I scroll the page. Could someone please tell me that how can I make the image that is within the rectangle to move?  Thank you very much

  You can apply the scroll to fill the picture or the rectangle itself if you are referring to scrolling rectangle on the page.

  https://helpx.Adobe.com/Muse/using/scroll-effects.html

  https://helpx.Adobe.com/Muse/how-to/explore-new-scroll-effects.html

  https://helpx.Adobe.com/Muse/using/applying-scroll-effects-browser-fills.html

  Thank you

  Sanjit

• Can no longer make system image after Win 8.1 upgrade (error 0 x 80780119)

  I have recently upgraded to 8.1 and is now trying to make the image of the system.
  Unfortunately, it fails with the 80780119 error.

  [Backup image failed | http://www.sawyourad.com/toshiba/failed.png]

  I had happen before on another computer system and recovery partition resizing seems remedy and is what is suggested on the web.

  However, I can't seem to do it on this machine, diskmgmt.msc does not seem to show any disk space used and worse still, many of the scores seem to be duplicated

  [image of drive partitions | http://www.sawyourad.com/toshiba/diskmgmt.png]

  You will notice that none of the scores of recovery seem to have any space used.

  I am at a loss to know what to do next.
  The 8.1 update made pretty much my dangerous to use machine, because I can not save more.

  I hope I don't have to add Toshiba to my do not buy list.

  Anthony Wieser
  Wieser Software Ltd

  + The message was edited: link has been removed - unauthorized +.

  Hello

  > I hope I don't have to add Toshiba to my do not buy list.
  Is not a friend of the option. Why? Because it seems that it is a common problem of Windows as a lot of people have called for a solution in the Microsoft forums and community.

  [Backup fails error code 0 x 81000019 | http://social.technet.microsoft.com/Forums/windows/en-US/25deba76-464b-4a9d-9b32-a283bb6a88ce/windows-7-rc-backup-fails-errorcode-0x81000019?forum=w7itproperf]

  Someone solved this problem by clearing the check box of the image create driver available when you choose the backup content.

  But it looks like his mistake when hidden system reserved partition created by Windows system does not have enough space to store a cliché.
  Please check the freespace on this volume.

  Follow the following steps:
  1. start-> computer-> right click--> Manage
  2. Select storage-> disk management.
  3. check that you have a partition system reserved about 100 MB in size or more
  4. If so, right-click on the volume and select Properties.
  5 view the used and free space.

  Backup Windows requires around 40 MB of free space on that partition to save successfully.
  So if the free space is less than 40 GB, backup is not getting enough free space.
  To work around the problem, try the following:

  Since reserved by default system partition cannot be extended, creating a new system volume is the workaround. Here are the steps to move the system volume to any other volume:

  1. choose where you want to have your system volume.
  A few things you should keep in mind:
  a. system volume cannot be created on a primary partition to MBR disk.
  b. If the volume system & boot volume are assembled, then BitLocker feature can be used to encrypt the volumes on your machine.

  2 propose the creation of a new volume (say f) on the same disk that contains the size of about 490 MB boot partition (make sure to keep less than 500 MB).

  3. assuming that Windows is installed on C: on your machine. From an elevated command prompt run: bcdboot.exe C:\Windows /s F:/s.

  4 from high command prompt run: DISKPART

  5. starting at the disk part command prompt:
  DISKPART > select volume F
  DISKPART > active

  Now you can restart your machine and F: becomes the system volume.
  You can cancel it by repeating the same steps using the original system volume (you must assign drive letter) to return to your previous configuration.

• Photo size under > image > image shows 3.1 GB size.  However save as tiff saying more 4.00 GB will not limit?

  Photo size under > image > image shows 3.1 GB size.  However save as tiff saying more 4.00 GB will not limit?  It makes no sense at all.  What is the problem?

  The image size dialog box includes no additional layers.

  So if you have more than one layer, it will probably be more than 4 GB. In this case, you will need to save as psb.

• make a slide show in first project DV or HD

  If I have photos taken with my sony WX1 and also HD movie 10MPIX camera (which may not work in the elements) and I want to make a slide show and then use a project with DV or a project with HD setting setting.

  I'll probably watch on TV LCD HD ready or better and can also burn them to DVD.

  I remember an earlier version of PRE that the pictures were not easy to get good quality when adding with a DV film.

  I tried a slide show in the Phtotshop element and image quality was very good when we look through TV - but there is a function limited on what you can for.

  So I would use elements of the first and still keep good quality.

  any tips?

  If I use the HD parameter and burn on DVS - no problem with that?

  If I add a DV film to the project - any problem I have will then face?

  I have version 8 first Prev and Photoshop elements

  For still images only, I choose a Preset HD project, say 1920 x 1080 and if adjust (resize) to that. If you Pan on any Zoomed from the stills, I would then hit them with in order to allow the Pan. Even if it means I have to scale a few different sizes, I just calculated the amount of movement that I require and scale to that. Some believe that it is better to scale everything to the maximum size needed, but I like the algorithms of scaling in pre/PrPro, so not much of it in PS, I can eventually and don't let NOT the NLE programme any scaling. It's just my preference and the workflow.

  The article on large Images, offers automation with Actions in PS, but I don't know how all this plays out in PSElements, sorry.

  Good luck

  Hunt

  [Edit] The REB above. are intended for a BD from the project.

  Post edited by: Bill Hunt - added [change]

• How to make a folder shows the number of files in there?

  How to make a folder shows the number of files in there?

  You have not indicated what OS you are using.

  Yosemite

  Action > View Options: Select to display the item of information

  

• DSC comment make an image as a button

  Hello

  I want to create an interface on by using the labview DSC module.

  With the DSC library I just have images.

  I want to know how I can make his images in buttons Boolean forms that appraraissent on mmon diagram pay so I can order

  So instead of having a single image on my front engine for example, I want to be able to click on this engine pour the order or even stop in say a Boolean but button displayed in the form of engine

  Thanks for helping me

  Hello

  You should have posted this message in the french section of the forum

  In any case...

  LabVIEW allows to customize the control, for example a Boolean button appearance.

  (1) place on the front of the Boolean button of the size i UN VI and select "Customize...". "from the pop-up menu.

  (2) in the command window that opens, right-click on the button allows you to import an image pour each State (true or false) of the Boolean.

  (3) save the modified control (.ctl file is closed, can replace the original order on the front or not).

  As an attachment, an example of what it can give with your pictures of engine. On can do better by importing images in PNG format allowing to have a fond better now, but I don't have the ad hoc software under the main...

  HL

• CAN MAKE THE IMAGE OF ITS SHARE IN A LIBRARY

  IN MY PROJECT, I WANT TO MAKE AN IMAGE OF SMALL PIECES OF PARTS OF THE IMAGE. I JOINED THE LIBRARY FILE WITH THE SMALL PARTS OF THE IMAGE AND THE ENLARGED IMAGE WISHING TO MAKE ON TOP OF PARTS OF IMAGAES. NY IFA CAN HELP ME ITS REALLY USEFUL... A THANKS IN ADVANCE...

  RAGIL

  RAGIL says:

  But here I want to insert multiple images to make a bigh image... so what's the next step?

  Do it in loops, where is the problem?

  

  Andrey.

• Images showing red blue spot and they are not sharp at all - Canon EOS 600 d

  Hello

  A month ago I bougth Canon EOS 600 D with 18-55 mm and 55-250 mm lens and everything is fine I capture images of the Moon and wildlife photography.

  But now I am facing a problem with it.

  Recently, I tried to capture pictures with my Canon EOS 600 d and suddenly, I noticed that the pictures are not sharp at all and the images show task red and blue. I don't know what to do I'm just an ammature in the present.

  Please can someone help me with this problem.

  

  

  It is chromatic aberration, it's a type of distortion that exists in all optical components to a certain extent, but varies depending on the lens.  In general, the less expensive lenses will be more CA, especially something like the kit lenses.  You'll notice more in high contrast situations, like a brilliant white on a black background.  You can fix it to a certain extent in post with programs like Lightroom or Photoshop.

• How to make a slide show of photos scanned to display in full screen?

  original title: how to make a slide show of photos scanned to display in full screen?  When you pass back to the pictures of small size.

  I use Windows XP Home Edition and picture & Fax Viewer.  Scanned a bunch of old photos and saved in JPEG format in the folder my pictures.  I want a slide show where photos take up the entire screen.  Times 'Fit' real buttons and "Best Fit" see the small picture.  I can zoom in and enlarge an image, but as soon as I hit the slide show, the size of the photo back to the original size.

  I use Windows XP Home Edition and picture & Fax Viewer.  Scanned a bunch of old photos and saved in JPEG format in the folder my pictures.  I want a slide show where photos take up the entire screen.  Times 'Fit' real buttons and "Best Fit" see the small picture.  I can zoom in and enlarge an image, but as soon as I hit the slide show, the size of the photo back to the original size.

  =========================================
  This will happen if the dimensions in pixels of the pictures
  is less than the display resolution in display properties.
  (Start / Control Panel / display / settings tab)

  Example... If your photos are 640 x 480 and your screen
  the resolution is 1024 x 768... the photos will be not fill the screen
  When displayed in the viewer of WP & F.

  If you resize the photos and increase the size in pixels
  to the same or a larger size than your screen resolution...
  they will be displayed full screen.

  (Beware... pictures low resolution may appear blurry/pixelated)
  When it is maximized).

  Also... to consider... photos in Portrait orientation will never
  be full screen unless they are grown in landscape orientation.

  For the future... I would suggest increasing the DPI for scanning of...

• Windows Movie Maker will not show the video

  I made a video in the movie player to windows, but every time I have save and play the video don't market not appear, but the fact of the audio. How can I make the video show?

  Hi laura234646,

  Did you check if the problem occurs with another drive?

  This problem may be caused by audio\video filters present on the computer.

  Step 1: I suggest that disable you video filters and driver, to do this, follow these steps:

  Director of open windows,

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  Now, check if the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  (See the section, what can I do if I have problems with video in Windows Movie Maker filters?)

  If the problem persists,

  Step 2: Reduce hardware acceleration to check

  1. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.

  2. click on display settings, and then click Advanced settings.

  3. click on the Troubleshooting tab, and then click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. reduce the hardware acceleration slider to zero.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.