What mini sdxc card works to store the system image

Similar Questions

• What SD memory cards work in HDR-CX210? I tried 3 with the same C:13:01 error!

  What SD memory cards work in HDR-CX210? I tried 3 with the same C:13:01 error! I tried microSD with adapter sandisk sandisk SD and SONY brand SD cards. I tried to format it so and not luck.  I chose this device for use with memory cards, and he so far has not been very useful for my needs. PLEASE ADVISE!

  Hello Clark,.

  Welcome to the community of Sony.

  This error message is displayed if you use the recording medium is either not supported for use with the camcorder or the support has a problem.

  Check the link below for the memory card, you can use with your camcorder.

  http://eSupport.Sony.com/docs/dvimag/HDR-CX190_CX200_CX210_PJ200_guide/Eng/contents/03/04/02/02.html

  A formatted by a computer (Windows OS/Mac OS) memory card has no guarantee of compatibility with your camcorder.

  Power reset the camcorder.

  1. Turn off the camcorder.
  2. Remove the battery for 30 seconds and then reinsert.
  3. Finally, turn on the camcorder.

  Reset the camera by pressing the RESET button with a PIN object did during 2-3 seconds.

  If my post answered your question, please mark it as an "accepted Solution".

• The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

  The system image (and Windows Backup with and without Image system options) just do not start with the same error message indicating insufficient space for "Volume Shadow copy".

  HD has about 100 MB for the operating system and other files more about 11 GB for HP Factory Image.  Trying to backup to an external drive, Iomega USB with 650 GB of capacity.  External hard drive now empty but has been used before.

  HP support has no answer!

  April 24, 2013

  Just thought I'd give you the answer to this old problem.

  Windows 7 (for earlier versions) work as described in the help of the screen except that the VSS mode

  must be turned on.  This allows Windows to actuall save parts of the operating system

  Although these parts are involved in the actual backup.

  Shame on the HP technical support for not knowing this.

  In addition, the original tech support suggestion was to call Microsoft.

  With a new HP PC you have no direct support from Microsoft (free).

  It took me a while to work with Paragon Backup (wonderful product) to realize that VSS

  must be enabled in the operating system for these virtual backup features to work.

  {Information}

• lost my card character, not in the system 32 folder, how can I get that back?

  lost my card character, not in the system 32 folder, how can I get that back?

  lost my card character, not in the system 32 folder, how can I get that back?

  It's a pretty good trick, considering that charmap.exe is one of the files that Windows File Protection is supposed to protect.

  Do a full disc search for charmap (without extension), making sure to look into the hidden files and system.

  If charmap.exe is not in C:\Windows\system32 (where it belongs), he probably is not in C:\Windows\system32\dllcache (where it also belongs).

  If you have a directory (which is common for systems with Windows) C:\i386 pre-installed, you should find charmap.ex_, which is a compressed version of the file.  You must use the EXPAND command from a command prompt window (start > run > cmd > OK) to decompress:

  Expand c:\i386\charmap.ex_ c:\windows\system32\charmap.exe
  copy c:\windows\system32\charmap.exe c:\windows\system32\dllcache

  Don't forget the space before the c:\ at two locations in two lines

  You will also find the charmap help files in C:\i386 and can expand those as well if necessary.  The expanded files should reside in C:\windows\help

• Error 15 with COLD LAKE in nisyscfg.lvlib:Set the System Image

  Recently updated the code that worked for imaging cRIOs in LV and LV 2012 2011 should be replaced by the new and improved nisyscfg.lvlib screw: define a System Image, get a System Image, etc,...

  I get the following error message when my installed executable tries to imagine a cRIO: ' 15 error occurred at the library function node call in nisyscfg.lvlib: Set the system (folder) .vi:1-> nisyscfg.lvlib Image: System to define Image (file) .vi:1-> GetSetSystemImage.vi'. Displays the possible reason: ' LabVIEW: resource not found. "

  What products/installation packages are required for the system of screw configuration? I'm including NISysCfg_Runtime and NISysAPI_Framework.

  Thanks for your time.

  Problem solved! Correct installation packages are: NISysAPI_Framework, NISysCfg_Runtime, mDNS_Responder, NI_Curl, NI_SSL_Support, NI_TraceEngine, NI_RPC and the mxRmCfg.dll.

• Try to use the System Image to migrate from Windows 7 for SSD for boot upward

  Hello

  I have a new computer Windows 7 operting.   I'm trying to migrate my OS to SSD for faster boots, etc..

  I first tried various 3rd party applications such as EaseUS Partition Master and Reflect, all futile for unknown reasons.

  Now I'm having problems using the built-in tool "Create a System Image" Windows 7.

  The Image of the system seems to be created properly and is listed in the appropriate folder.   The next step is to use the Windows 7 USB/DVD Download tool to save the ISO file, then use this ISO on the DSS file.

  Unfortunately, despite all that I've read to the contrary, the file created by windows wasn't an ISO... it saved as a VHD file.   The download tool cannot copy VHD - only ISOs.

  Microsoft technical support suggested that I have post the question.   All the patches?

  Thanks in advance!

  What happens when you boot the system repair disc?  If necessary, you will need to enter your BIOS Setup utility and make your optical drive the first boot device.

  You have created the system image includes everything: the files of your operating system, your application to the program folder and your data.  Assuming that you have already used your system for awhile and so Windows, your installed programs and files total user more than 128 GB, the image does not fit on the SSD.

  If everything except your totals of less than 128 GB user files, then a possible scenario would be to backup all your files from user to some external medium data, confirm that the backup is valid, and then delete the files from the current hard drive.  Then make an image of system of what's left (which is now less than 128 GB) and restore that image on the SSD.  You create a new user profile and then copy your files from backup data on disk 1 to and link to your user profile in the user data (see tip below).

  Another alternative, especially if you have more than 128 GB used even without your data, is to do a clean Windows 7 on SSD install, reinstall all your application files, specifying as much as possible of the facilities is located on the 1 TB drive and your profile link to the data of the user on the 1 TB drive.

  This trick of sevenforums.com can help with the problem of having windows on the SSD and your data on the disk rotation:

  If you are simply wanting to save files HARD disk space in your user folders, you might consider this below in order to access the files in your library with the actually located files where you want to place. This way you won't have to worry about the potential problems that come with mobile user folder locations.

  • Create a new folder to any location you want.
  • Move all the files you want in the new folder.
  • Include the new folder in a library of your choice.
  • If you wish, you can also set the new folder to be default 'save' for the location for the library as well

  To do a clean install of Windows 7 on your SSD, follow the instructions here to get a file ISO of Windows 7 to the same version of Windows 7 that is preinstalled on your computer: https://www.heidoc.net/joomla/technology-science/microsoft/67-microsoft-windows-and-office-iso-download-tool burn the image on a DVD (Note: you can not just copy the files, use the built-in tool to burn dvd of Windows 7 or free third-party tool like ImgBurn).  Use the product key from the label on your computer (not the key retrieved by using a key finder program) to activate Windows.  See https://techingiteasy.wordpress.com/2012/04/13/how-to-activate-windows-7-oem-license-using-a-retail-disc/

  If this all sounds complicated - it is, and I haven't provided all the details - you can consider getting the help of a local independent computer repair shop (not a chain of stores).  Just make sure you get a real installation of Windows 7.

• When you try to restore the system using the system image, Windows 7 does not find the USB HDD.

  I have 3 computers backed up with their images of system on an external USB drive.

  However, when you try to restore a computer using system image, Windows 7 fails to find the USB HDD.

  I think it would be probably due to the fact that the WindowsImageBackup folder is probably not in the right place or a superfluous folder. Here's an example of how my disk backup has arranged record...

  Root for example E: /.

  -Computer #1

  - WindowsImageBackup
  -ComputerName #1

  -202348 backup 2016-05-29

  -Catalogue

  -SPPMetadataCache

  -MediaID (file)

  -Computer #2

  - WindowsImageBackup 
  -ComputerName #2

  -202348 backup 2016-05-29

  -Catalogue

  -SPPMetadataCache

  -MediaID (file)

  -Computer #3
  - WindowsImageBackup
  -ComputerName #3

  -202348 backup 2016-05-29

  -Catalogue

  -SPPMetadataCache

  -MediaID (file)

  I realize that the WindowsImageBackup folder should be at the origin, so I moved this computer folder #1 a less E:\

  However, restoration is unable to find it and can't even see the USB HDD.

  Can anyone offer advice on what I can hurt?

  Original title: restore the System Image

  Thank you all for responding with your advice and suggestions but the failure has been a bit of my doing (?).

  When I went to another port for the USB, everything worked fine! Simple solution, that I should have tried first - duh! :-)

  My USB 3.0 4TB drive was originally on a port USB 3 (which was either missing or not recognized by my Bios) and when I changed my old disk ports USB 2, everything has worked well!

  Thanks again, all...

• Cannot restore the system image backup in Windows 7

  Hello

  Im trying to use the recovery process of Win7 system standard Image for the first time and its does not work.  I'm recovering the image on my hard C primary, internal to the system drive.  I backed up correctly a Win7 system on an external hard drive image.  To restore I connect in the Control Panel on my system (still ongoing) and select the advanced option to retrieve my disc image.  The process stops then the pc and it restarts automatically.  Then he finished "Windows loading files...". "Then I select my keyboard for data entry, click ok.   Then the process correctly detects and automatically selects my last image of backup on the external drive system.    The next step begins the problem.

  The option 'delete existing partitions to reformat the drive... '. "is grayed out and inaccessible.  The only other option is: "install the drivers for the drives, you are restoing to... could solve the problem."  Also, "insert media for the device and click OK to install the drivers." I have a new HP Pavilion Desktop with Wn7-64 bit and HP has its own recovery on C partition and there is also another unknown partition (to me) it.  I was provided the only brackets installtion / have the HP recovery disk and the recovery of Win7 boot floppies that I burned after buying oringal.  Therefore, I select the button Install Drivers with no media of installtion and I see the Windows/System32/drivers folder. I can only select one driver at a time, I tried what I thought were the pilots of C - IE disk.sys, partmgr.sys, snapman.sys and tdrpm.sys and all of them return the error msg "specific location contains no information about your hardware."  I also tried to use the two recovery discs that I burned, but they resulted in a similarly generic error message.

  Drive C is very well so I am at a huge loss as to what the standard restore process of the operationg system image is looking for and why missing drivers for drive C?  Can someone please explain what this process needs so I can restore the system image?

  Thank you, roggsf

  FYI... I was able to recover my Win7 System Image by using the external backup and the ERD of Win7.  I am now more confident that backups of the system can be invoked in the event of a disaster.

  The process was/is still a bit confusing because it faced the same problems with the possibility of "remove existing divides to reformat the drive" grayed out and inaccessible.  And the other option: "install the drivers for the drives, you are restoing to... could solve the problem" is still a mystery to me.  However, using the repair disk, I was able to bypass the need to use one of these two options, click Next, and start and finish the process of recovering successfully.

  I hope that someone will be examine and solve problems with recovery only the Panel since it is the recommended approach (to a working system).  I'm a happy computeree once more.  Thanks for the suggestion.

• Need to backup all programs and files without the System Image

  Hi all

  Recently, I myself in a dilemma. I installed 4 additional disks with the intention of creating a RAID volume supported by the BIOS. To do this, I need to change the BIOS setting of the controller which includes all the volumes, including my boot drive (that I don't intend to RAID). The problem I have is that when I pass the UEFI to RAID controller, Windows Recovery will not use the System Image I did. He said that the volume was created under a different arrangement (Bios vs. EFI).

  What are my options? Is there a different backup setting, which allows to keep all my installed software? I am not concerned with the data that I can copy it to an external volume, but it would take several days to get all of my software reinstalled. I would like to avoid this. I guess I'll have to reinstall Windows Pro 8.1 and then use a backup program to restore everything. If this is the case, then I need to know which backup program will work. If there is a better way, I would like to know. I see my options in the form, get another backup program, get a map of controller for the boot drive or the RAID volume or just reinstall.

  Thank you

  Hello

  Thank you very much for the detailed information.

  You can search the application using your favorite search engine, helping you to backup all programs and files without the System Image.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can ask your question on the TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Can the Win8 recovery drive and the System Image be stored on the same device?

  I intend to create a windows 8 recovery on my USB HDD drive.  Then, I want to create a System Image using the file Win7 recovery tool, but put on the same HARD drive, so that I don't have 2 devices.  Normally, I believe the recovery drive utility fits on a 256 MB USB key, but why not co-exist with the system image files?

  Hello

  Yes, you are right. To store an image of the system, the disc must be in NTFS format. Please refer to the information on the following link; If it's for Windows 7, the information is true for Windows 8 as well.

  Back up your programs, files and system settings

  Hope this information is useful.

• HPE 270e initialize system repair disk to restore the System Image

  I am really enjoying my new HP HPE 270e Win 7 HP x 64 computer desktop, but for some reason, ESC, F-1, F-8, F - 10 and F - 11 key do not work properly and when restoring the system came out the other day I was forced to restart from Factory Image DVD who put me several weeks back and I was forced to start again set up my computer.

  Before all this happened, I saved an Image of the system 2 different external drives of 1 TB and a Win 7 system repair disc to use to retrieve the System Image, but my office of 270e HPE will not recognize the disc. Nor will it recognize the Macrium reflect Win 7 PE 2.1 "Rescue CD", which will get 2 more pictures system I saved. Even when Windows does not shut down properly, it is impossible to select options indicated to "Start Windows normally".

  According to the blue HP color screen, by pressing the ESC key will allow to the entry of 5.28 BIOS TRUCKEE 1.04E01 of the motherboard to enable the computer to boot from CD/DVD, but I'm currently not able to select ESC or any other option besides. I studied the 5.28 BIOS and it will allow booting from CD/DVD and I hope someone here can instruct me as to how this feature can be activated.

  I have a laptop HP with Vista and every time it starts, it offers access to the ESC and F key options, but just HPE 270e Office ignores this screen and sails right through startup in an average of 20 seconds. Even if I see a quick start that I would gladly seconds on the screen startup options if only I could find a way to enable.

  I appreciate any help with the activation of these startup options in my office of 270e HPE. I spent 5 hours talking to HP Technical Support and all the help they could offer said me "these options will be presented if you need. Well, the possibility of restoring a system from the system repair disc Image is intended for Win 7 did not appear, and I hope that I will be able to acquire knowledge of the implementation of this basic option in Windows 7 Home Premium.

  ~ Maxx ~.

  Although I still don't know why my HPE-270e will not recognize recovery media yesterday I finally could add the Macrium Reflect PE v2.1.2866 my computer Windows 7 start menu and I am now able to boot into Win 7 or consider recovery environments without using the repair disc Windows or the media reflect rescue...

  

  ~ Maxx ~.

• Extreme SDHC or SDXC card work in Portege R600

  The R600 does support the sandisk 'extreme 30 MB' card or SDXC card?

  I ask because they seem to be the only ones with a capacity of 64 GB. I need the maximum possible additional capacity

  TIA/gary

  Hello

  AFAIK the SD SD card reader supports card up to 2 GB, SDHC up to 16 GB and mini SD (with adapter) up to 2GB.

  I didn t find all the details on the use of larger SDHC cards and I think you will have to test it yourself. But in my opinion, there could be a problem with these cards!

• N what internal wireless card work with my Presario CQ60-204NR?

  I just bought a N Wireless card on ebay but got the error "104 device not supported wireless network found.  I updated the bios form F.34 F.54, without change.  I've looked through the HP support pages, but seem to be going in circles and not to find whatever it is approved.  I am running Vista Home Basic 32-bit, even though I know that the problem is actually in the white list of BIOS of wireless devices.  I don't want to push every update from Microsoft to find out which interferes with an upgrade wireless, as stated in another post here.

  Thanks for the pointers.

  Jack

  Hi, Jack:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  The only wireless cards, you can install are listed in Chapter 3, pages 3-7 and 8-3.

  They must also have the part number HP on them, or they won't work.

  So if you are interested in one of these cards, I recommend that you do your research on eBay by part number.

  I see that there is only one card that can be a dual band card, and it is the WLAN Atheros AR9280 802.11a/g/n module.  And I don't know if it is dual band N or just only on the 5 GHz band.

  Part number depends on what part of the world you live. For the USA, which would be part #.

  482260 001.

  Paul

• What video capture cards work with Media Center?

  I use Windows 7 Media Center and I content HD through DirecTV, my system has STB (2) with outputs HDMI (outputs of the component also), I want to know who (2) video capture cards work with Media Center as would make a key pair?

  It seems that MCE works with the capture card (1), but not two...

  Help, please...

  Saturday, December 20, 2014 08:46:27 + 0000, RonaldPeterson wrote:
   
  > I use Windows 7 Media Center and I content HD through DirecTV, my system has STB (2) with outputs HDMI (outputs of the component also), I want to know who (2) video capture cards work with Media Center as would make a key pair?
  >>
  >>
  >>
  > It seems that MCE works with the capture card (1), but not two...
   
  Try posting this question at the http://thegreenbutton.tv - Media Center has been
  designed to work with the tuners for television recording, but the people he could have
  a few ideas.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

  I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

  My problems were not related to the missing CODECS.

  I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

  However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

  I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

  I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

  Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

  Here's an exact quote:

  Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

  All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
  After that, in Registry Editor, navigate yourself in the left pane until you reach

  My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

  And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
  Come in.

  Well, of course, it didn't work the first time. I received this message:

  the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again
  
  I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

  After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

  Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

  This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

  This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

  This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

  I clicked on apply advanced Drivers32 window security settings.

  I clicked on apply permissions for Drivers32 window.

  Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

  I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

  Hope this helps someone else.