What parts of my drive of economy/budget implemented need attention?

Question: should which parts of my set-up by car I be concerned? Or should I worry? I'm not having problems right now, but I'm trying to predict the future upgrades when they are needed. Now that I have more editing experience, I see how much it is important to adapt my system to match the images that I'll need to work with, a concern that I didn't have when I started to learn how to edit, mainly because I didn't know any better.

I have an entry-level system, four discs and I change only in CS5 right now, with a bit of PS and AE when necessary. 95% of my time is spent in the first.

Here are my readers:

  1. Start - 150 GB Velociraptor - contains the operating system and the swap file
  2. Media - 2 x 1 TB drives WD Black with a Jmicron RAID in AID0 card - holds all sequences to be cut and all photos
  3. Swap - 64 GB SSD (Patriot PS-100) - holds previews, media Cache and media Cache only, nothing else
  4. Storage - WD Blue 500 GB, holds all the music and VO, so what makes final SOUL and all my creative project files

Backups: The storage disk is saved daily on a 500 GB internal Seagate Barracuda and media player is saved daily on a 1.5 to external Seagate Barracuda. I hate losing data. I killed so many readers over the years, that I could probably build a wall of them...

And here is my card of base system:

Card mother EVGA P55 THE

Intel i5-650 3.2 GHz

Corsair 1600 mhz RAM, 8gigs in 4 sticks, hours 9-9-9-24


EVGA GTX 465 OC'ed at 800 mhz on the GPU clock and 1700 on memory clock

Coolermaster Silent Pro 700w PSU

I am, of course, in the field of the economy/budget with regard to my set up. I know I have to go to 16 GB of RAM - that needs to be done before the end of the year. I know I will also need to update my video card, but I have to say that the 465 has been really good for me so far, I was very happy with it.

Specifically, I wonder about my SSD - it is already endangered, reading speeds are always very good, but the writing speed is much, much, about 18 MB/sec when it allows to write to more than 100 MB / s. But, I do not fear that I can replace that pretty easily, I'm not sure if I have to replace it when it finally dies. I don't really like SSD more, I thought they were big when they first came out, but now that I've learned more about NAND memory and its limitation on writing, I am not so excited. I don't know what to replace by when he died, but I think another velociraptor because I am very satisfied with this drive, and I like WD generally compared to other hard drive manufacturers.

I also wonder on my drive which is in AID0 - it is fast enough for images I work with now, which is 99% of AVI files in 1280 x 720 with bitrates of 25 MB/s or less. But if I climbed to other types of images, I wonder when I will start to have problems of friction autour, etc... I work at half the resolution if I must, but I'd rather modify if possible at full resolution. I had initially started on a media disk drive and it doesn't work at all with HD images, it was a nightmare until I went to a stripped volume.

Until I move to the other sequences with increase rates, or multi-cam images, I think that my Media AID0 player is sufficient. But I do not know...

Just wondering about cost-effective ways to upgrade my readers in the next 6 to 12 months and are looking for ways to get the best performance from my readers and their whole upward. I like to be effective...

Thanks in advance for any advice - it will be appreciated and taken seriously.

In this well written post make you a whole bunch of questions, so I'll try to spend a little more.

At least your source material is especially 1280 x 720, a wrapper and AVI to 25 Mbps data rate. I don't know what codec is in this envelope, but I'm guessing that AVCHD or something in that sense. The first thing to realize is that when lowest data rates, there is more of compression and therefore more load on the CPU, but when rates increase, then it is up to the central unit (decompression is easier with higher data rates) but requires more bandwidth to disk configuration.

Yesterday I was testing HDV, 25 Mbps and Canon MXF 422, 50 Mbit/s material. You know that even if the differences were very small, the higher data rate material gun was easier to modify and marginally faster than HDV. The message is that it is often better to have material of high data rate.

With that road, we will study your material. First of all, the GTX 465 OC is a video card perfectly fine if you have applied the 'hack' and even if you were to exchange it for say a GTX 660 Ti, which is faster, longer cold and can drive multiple monitors, it seems like a waste of money, because the difference in performance is marginal at best. Your video card is blocked by the CPU and memory limited, IMO has 660 Ti GTX is complete overkill.

Your current configuration of the drive is very good for an economic/budget system. When the Patriot dies and needs to be replaced, you can get an another Velociraptor, but you might also consider a Seagate Barracuda 7200.14 or another WD Caviar Black. If you plan from multicamera editing, media cache will grow a little and then either the rate of filling on a small Velociraptor can become a bottleneck or a more Velociraptor, is far more expensive than the two alternatives.

Of course the system would greatly benefit from more memory, especially during the start-up of multicam, but is - this wise? It requires new sticks and your system is still being held by the CPU dual core. I think when you start the multicam and more complex projects, it is time for a new motherboard and CPU. Your investment in disks can be done to the new system, it is possible that your video card, but investing in the new memory now requires that you have already considered what kind of motherboard you can get in the future, so that at least you are certain that this investment can also be put to the new system.

In this perspective, to ensure that any disc you will get, it's a SATA 6 G drive, even if your card mother current does noy advantage of it yet, will be your new motherboard.

For a new processor, the minimum that I would consider is the i5 - 3570K, which is a quad core, but not better HT., but also more expensive is the i7 - 3770K which HT. So all what you need to consider is what card mother socket 1155 could meet your needs and what memory is approved by this Council. If this same memory is also compatible with your current motherboard, then you will know that you can transfer this investment to the new system as well.

I hope this helps.

Tags: Premiere

Similar Questions

  • Satellite A105-S1712 - what parts can be upgraded?

    Nice day

    I have a Satellite A105-S1712 and trying to figure out what parts to this topic are extensible - other than the RAM and hard drive. I'm not afraid to take part, as I've done for a LCD problem.

    Outside the possibility of upgrade of the laptop, I was also wondering if anyone out there has experienced a problem of overheating and loss of WiFi connection?

    Thanks in advance to those who can offer advice.

    Alpine salvation,

    + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
    http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

    About overheating, you should check the other article:

    + How to clean a Toshiba laptop cooling system +.
    http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

    As you can see, for most of the questions there is already an article on the Web from Toshiba site :)

  • What part of fan should I buy - HP Desktop

    I have a HP Pavilion elite e9220y award-winning House.

    prod # NY553AA

    Windows 7; 64 bit

    I think my fan is going; should what part I buy? must be a part of HP?

    I posted a similar question yesterday, but the answer was a hard drive! So I try again... Thank you very much...

    denise14107,

    The part number for several rear case fans stock is 5188-3722. The same number is used for several units of HP. Also, it does not reference a specific manufacturer. Reference is made to the specifications of the parts.

    Now, regarding your question and quandry.

    You can measure the fan using this model. ' 92mm 3.6 ", is 80mm 3.15.  Back the box (normally a 92mm) is a 3-wire fan and is set at 1600 rpm. The CPU fan is usually a 4-wire, rated at 3000 rpm PWM fan. Where several users mistake is to select low fan RPM, causing the system sensors trigger a 'failure '.

    Your real problem is subjective. First hard drive, now you think the fan. You will need to open the case and a Visual inspection and locate the problem.

  • What type of HARD drive should I buy so he could keep in my aspire v3 772g?

    I have never handled parts for laptops before so I'm not really sure what type of HARD drive, I need, and I don't have to build a pc for the last 15 years, so much has changed lol

    If I could really need help, don't really care about ssd so I'll just for a normal HDD on May 1 TB and I you'd be grateful if someone me pointed in the right direction or even a recommendation

    and as I said in the topic, I got an Aspire V3 - 772G

    thnx

    Hello

    Here's the original HDD 1 TB for Aspire V3 - 772G (see links):

  • problem loading Director of HP and other similar parts of the driver for 1315v all-in-one

    problem loading Director of HP and other similar parts of the driver for 1315v all-in-one

    Hi Richard,

    Thanks for the reply! I hope that the printer does not work once you enter handwritten, but we are here if you need additional help for you.

    This here will take you to the latest package of downloadable software for your printer. That's maybe what you already but I wanted to make sure that you have had access to what happens.

    Hope you have a nice day, Richard and everything is working for you!

  • What kind of hard drive is HP Pavilion dv6700. its about 7 years

    its running vista, but the computer will not start all the way.  I did a diagnostic test and it said to replace the hard drive so im wondering what kind of hard drive is in it.   What is happening is the load on the computer to the microsoft, just before you put your password and then just stays black.

    Piece of cake on your model.

    If the test indicates the disk needs to be replaced, I would not argue against this info.

    You can try reinstalling the operating system before you buy a new HARD drive, but if it doesn't, then you know that the drive is kaput.

    Here is the link to the service manual.

    R & R procedures are in Chapter 4.

    http://h10032.www1.HP.com/CTG/manual/c01295877.PDF

    You will also need to reinstall the operating system. You can see if the recovery discs are available by contacting HP technical support.

    If you can read the product key of MS Vista 25 characters on the bottom of your PC, you can do your own Vista installation disc and allows to install the operating system.

    If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

    You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

    Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

    The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

    The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

    When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

    I selected no, make the ISO file.

    It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

    I tested both of them on my hp dc7100 CMT PC desktop computer, they worked perfectly.

    When you enter the product key, he knows which version of Vista you have.

    http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

    After you install Vista successfully, you can then install the drivers for your PC and driver page support.

    This is where I buy my PC hardware:

    At the top of the drive of 250 GB 7 200 rpm of line:

    http://www.Newegg.com/product/product.aspx?item=N82E16822136279

    A 250 GB drive to 5 400 rpm standard of good quality.

    http://www.Newegg.com/product/product.aspx?item=N82E16822236238

    You must transfer the caddy, the screw and the connector from the old HARD drive to the new, so nothing to mix until the job is done.

    Paul

  • What size of HARD drive is compatible with my Satellite A100-771

    Hey guys,.

    is there a size limit of HDD for my A100-771?
    And what type of HARD drive I need? IDE or SATA?

    Thank you very much.
    Eathen.

    Hi dude

    From my experience, the Satellite A100 series was equipped with SATA drives.

    There should be a SATA HDD controller and you can use SATA 2.5 hard drives.

    I think that there isn t disc HARD size limit since the SATA controller is not limited to all special HARD drive sizes

    I think that most SATA HDD must be compatible

    Greetings

  • 6 1012sd hinge envy / back cover - what parts of screen replacement?

    Hello!

    My HP envy 6 portable 1012sd, I have for half a year now, has a broken left hinge. I saw on the forum that it is a known problem, unfortunately I left my pass laptop out of my hands so I kind of did myself (although it was a weak point that broke).

    Because it is not under warranty, I have to fix it myself. I found the interview guide (pdf document named c03282148) and opening my laptop I saw that the hinge itself is not broken, but a small piece of plastic of the back cover (of the screen) is broken.

    If I want to order a new back cover view. However: there are different maintanance guide three who all the discription "Rear cover" in spare part numbers: 686590-001, 692382-001, and 694471-001. How can I find out what part fits on my computer?

    I hope someone can help me!

    Thank you!

    JHKaan

    I'm a link to the contact page of parts store HP below that I can't answer your question precisely because I do not have access to the matrix of HP parts. If you communicate with people at the HP parts store they can answer your questions with true and accurate information to ensure that you get the right part.

    http://PartSurfer.HP.com/contactus.aspx

    The problem is that there are different variations of your laptop as it has been sold in various parts of the world.

    If you have any questions or concerns, feel free to re-post.

  • NEED PART NUMBER FOR DRIVE OF FUSER ASSY 5200

    Hello

    Nice day

    KINDLY HELP US TO GET THE PART NUMBER CAN BE ORDERED CPL (COMPLETE UNIT) PLAYER OF FUSER TO HP LASER JET 5200 PRINTER. IN THE OPPOSITE CASE PROVIDE US NUMBERS OF PARTS GEAR FUSER DRIVE SET THE QUICK RESPONSE WILL BE APPRECIATED.

    Hello

    Part number for LJ 5200 lie from this link,

    http://h20141.www2.HP.com/hpparts/SearchProduct.aspx?mscssid=8D31041AC1294897852887789830B5C8&SearchCriteria=Q7543A&sMethod=1&sRefAsp=Search_Multi_Product

  • What is a network drive?

    I am running Windows XP Pro v.5.1.2600 SP3.0 32 bit... on your desktop... browser is Firefox latest version...
    I'll try to find out why my computer/browser is slow, & have met this term... So what is a network drive & how do I know if I have a...
    I am a woman of the Grotto with computers, but am not stupid, just know that little.
    Thanks in anticipation...
    Sylvia

    Hmmm.

    Whist, that I suspect that Richard is correct, you do not have the readers of network (based on your own description of yourself), it does not necessarily follow that a standalone PC does not or can not have any network grows. There is nothing to say that someone could not create a network drive on their own standalone PC, for example in a deep subfolder of 'My Documents'. Maybe it's to facilitate navigation in this subfolder without having to navigate through the folder structure. Real examples...

    You could have a folder structure in My Documents as follows...

    My Folder\Yet of Folder\Another of Documents\A one

    You can create a network directly drive to "Yet another folder", which could be given to the letter Z (like the disks/partitions on the PC itself gives a letter, so are all network drives). If you open my computer and then open the drive Z you get directly on the content of "Another folder" without having to navigate through all the intermediate folders.

    Normally this would be folders that reside on other PCs in a network of PC, but it is not obliged to be like this.

    In the simplest XP environment, you will have a C drive and almost certainly a D drive. Drive C will be your primary bootable drive that contains Windows, installed programs and data. Drive D will be your optical drive. A and B are usually reserved for floppy drives and not used if the PC has no floppy drive. If you have created a network drive on your PC or any other PC, the drive letter is given to can be a letter E through Z.

    If for example you have two optical drives, they would probably be D and e. leaving F thanks to free Z for future added features or network drives. If you have a card reader, this will also give a drive letter (format the card multi readers will receive more than a driver letter). The external drives and USB keys also will give a drive letter (or letters) as well as housing of readers of card/USB on attached printers.

    Open my computer and look at the listed drive letters. If you have network drives, they have been handed a letter and probably described as 'the PC' where PC is the name/description of the computer where the data resides, which can also be your PC.

    Like Richard, my bet is that you will have none.

    Tricky

  • What is a hard drive hybrid

    novice in computers here... Please tell me what is a hybrid hard drive? I was Mobile shopping and it was an option, and then I was unable to select an SSD as an option.

    (1) what is a hard drive hybrid?

    (2) which is better/more fast?... (1) a disk hard of 750 GB hybrid with a solid 32 GB set out by car or 2) a 750 GB HDD hybrid with HP protectSmart hard drive and does not allow the addition of an SSD.

    THX, Mo

    Hello

    1. Hybrid HDD is a new generation of HARD drives, you can find more information at the following link:

    http://en.Wikipedia.org/wiki/Hybrid_drive

    2. for single, hybrid HARD drive HARD drive is faster but with in a machine, the SSD + HDD is faster and more expensive too.

    Kind regards.

    Edit:

    Well, thank you Paul - you are faster than me.

  • What kind of hard drive is the V5 Aspire 122p-0643 have? SATA (I think?)

    I was wondering, cause I need to take out the hard drive and buy a hard drive enclosure. And to do this, I need to know what type of hard drive it a. probably SATA if

    Hello spottedstar1123,

    For Aspire V5 - 122P, you have 3 HARD drive models:

    SEAGATE - SATA 2KH.32001.026HDD.7mm.320GB.5K4.SATA.4k.LF
    TOSHIBA - SATA 2KH.50004.011HDD.7mm.500GB.5K4.SATA
    WD - SATA 3KH.50008.044HDD.7mm.500GB.5K4.SATA.8Mb

  • What is the audio driver support device conexant high definition

    What is the audio driver support device conexant high-definition?  When I try to install the driver, I get a message saying that the installation has failed not found media device.

    Since you are not the original author (which never came back after his original post in April), if you have a similar problem, then the answer is similar: reinstall your drivers.

    http://welcome.HP.com/country/us/en/support_task.html

    MS - MVP - Elephant Boy computers - don't panic!

  • What is the right driver for hp photosmart c4450 for windows 8.1?

    I have HP Photosmart C4450 all-in-one printer.

    With Windows 7, I used successfully PS_AIO_03_C4400_NonNet_Full_Win_WW_130_140. However, when I run this installer with Windows 8.1, it shows that "exit". It shows no "install". What is the correct driver to use for win8.1 so that I can install all features?

    Hello

    Try following these steps and let me know if that can help you:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.

    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %temp%, and then click OK.

    3. Select any content in this folder by pressing the keys and the CTRL key, then click on remove.

    No worries, it is all a temporary folder and should be deleted as standard PC maintnance.
    4. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    5. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    6. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    7 launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    8 start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    9 reboot your PC

    10. run the installation file and check all difference.

    11. open McAfee and reactivate McAfee for analysis in real-time.

    Kind regards
    Shlomi

  • What is the right driver 4 my flag?

    Pavilion dm1-4010us

    I found two drivers:

    Broadcom bluetooth driver driver atheros bluetooth.

    What is the correct driver please?

    THX.

    Open the Device Manager. Make a right click of the device without driver or an error, choose Properties.next go to the Details tab and use the selector drop-down menu to choose the hardware id. After the first half of the top line in the list that meets.

Maybe you are looking for

  • HP Photosmart C410 abandon

    My C410 was great, print job wireless, for some time now, but has suddenly stopped communicating with my computer, Windows Vista. Any ideas? Wireless test report C410 cks though. Go Hmmm in Florida

  • procblem typo

    as you can see I'm getting the problem I type C she print CN AND N WHEN IT TYPE CN certain TIME SHIFT CALCULATOR POP UP. HOW CAN I SOLVE IT. PLAESE HELP

  • What is a rule to update...

    HelloPlease explain what a rule to update...Thank you

  • Touch and hold right click Pen

    I was recently loaned a small Wacom Intuos Pen (CTL-480), try. It is my first time using a graphics tablet, so please excuse my ignorance.I have the settings then tap and hold the stylus (long wait, I heard called) will do a right-click. It had been

  • How to change password for unifying database

    Hello worldHow can we change unifying the database user password. Table password field (sys_login_info), I did nothing, but it does not work,because of the encryption. The user can still connect.any suggestionEmmran