What power connector cable do need me for a portable 17 want?

Similar Questions

• My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapter or cable is needed?

  My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapters or cables are needed?

  Hello!

  Unfortunately, this feature is only available with the GoPro cameras.

  And Yes, if all cables already existing for these purposes, it would be kind of a pain to take pictures and do not shake the camera accidentally. Maybe, VSCO camera makers will make such feature in some time in the future. This idea is excellent and innovative. Maybe even Apple will listen to users and make their new iOS 10.

• What kind of cable I need to transfer video to computer with a Sony Handycam CCD-TRV66

  I guess I need a firewire cable again. I'll transfer the video footage from my Sony video Hi8 Handycam Vision CCD TRV68 NTSC FOR memories of home software. I'm wonderin what kind of cable, I need exactly to do that thank you.

  Hi chrnko,

  While they inspected on the ports of the camcorder, it has no port or to transfer your files directly to a computer. The CCDTRV68 is not an iLink or USB port that you can use for this purpose. The only way to transfer your files from tape would use the A / V cable. You can connect a DVD recorder to convert them into disks.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• HP Compaq Elite 8000 small: what type of cable should I use for dell dual monitors hp compaq 8000 elite?

  I'm not very tech savy when it comes to computers. I'm trying to understand what kind of cable I need to buy to allow both of my Dell, monitors to connect to the back of my Tower. I have only 1 connection vga at the back of the tower.

  Not at all.  Gold is one of the best drivers.

• Satellite P300 - 18 M - what kind of cable I need for S/PDIF?

  Hi, I have a keen to use the S/PDIF output on my P300, but I'm not sure what kind of cable to get, I need TOSLINK?

  Thank you

  Hello!

  I don use S/PDIF but I tried a little with Google and I noticed that it s possible to use three types of cable:
  -Cinch cable
  -TOSLINK cable
  -Jack plug

  In addition, this Wikipedia article is really interesting. Check it!
  http://en.Wikipedia.org/wiki/S/PDIF

  I hope I could help a bit.

  Good bye

• What kind of program do need me for a download of adobe?

  Hey,.

  If I want to download indesign in a trial version, it does not start. A window opens and the message is that I need a program to open the next - download the file aam://SAPCode=IDSN?version=11.0?actionList=CC-UI?passPhrase=had4UJmkXH0lwY7eLMIxGZBrL2aN3 IgZACW24IWu2vH0jEGQcPeTM7pTSz/5kKqRBNJJlLBG6AyJLeyyKtMVjU/ZT6sG12etwUzOhZqwiHeqQcLlWw + tbuwSLp3emo0G9yYDKe5Sq8DI4W8LTUNVXEOoCqwZTM3KxjIp tcIP + 5 =

  What can I do? What kind of program I need?

  Thank you

  Martha

  Which version did you install?

  For CC versions, download the CC Application first and then use it to install other applications.

• What kind of card do need me for the replacement of mini

  Hi - First of all some context.   My husband has dementia and the only thing he can still do is some art works and send them to friends and surf the internet.   He spent hours on his old Mac Mini up to last week, when the hard drive is dead.  I took it to the Genius Bar and they said it was really dead.   The good news is that we have Time Machine and Time Capsule backup and my step son has sent us one of her old Mini as a replacement.  The problem is that the port for the monitor is totally different.  The monitor is an apple screen, but it does not replace Mini

  So I'm a bit confused as this kind of cards that I need to do all work.   Attached are some pictures of my problem:

  1 is the oldest mini back showing the port on which we used on it to connect the screen

  2 is the replacement sent by the son-in-law mini.   Display port is circled.   This is what it takes to go in.
  3. is the wire at the back of the Apple screen we have.   It is an older display.   He has three sons (one is a USB cable that we never used) the wire we used is circled.  I don't know what about the other wire.

  4 is a bulk of the wire have been used and the other wire of mystery.

  Can someone help me understand what I should buy?  Thank you!

  

  

  If I am accurate, your Mac Mini replacement is older than your previous Mac Mini; so, you will need to buy an older cable/adapter to connect to the computer with your screen. I don't know the model number of your monitor, but on the side of the computer, there must be a kind of "DVI". (Not Mini DisplayPort, Micro-DVI, or Mini-DVI)

• What tool or utility do need me for the feature keys FN?

  Hello

  When I press the "FN" key and other keys combination (i.e: F1, F2, F3...), nothing appears on the screen as usual. It's seems that it doesn't work. How can I fix that or what driver to download?

  Thank you very much for your help!

  I put t know which model of laptop and OS you use so my answer will be quite general.
  Visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page, select your laptop operating system you are using and download/install Toshiba Value package added. This package contains the utility Flash cards.

• What type of screwdriver do need me for a MacBook Air (11 inch, late 2010)

  I want to upgrade the memory of my macbook Air (which currently has 2 GB) 4 GB and I need the right screwdriver. I'll use a single 4GB DD3 1066 MHz memory.  Is this right?

  Thanks for the tips.

  The memory in this model cannot be updated according to my information. This is why there is not user accessible memory slots. Open the computer won't change.

• What kind of ram do need me for a aspire Dual-Core CPU T4500 @2. 30 GHz running windows 7 64 bit

  I don't know what kind. speed and max amout I can us. Can someone help me

  Thank you for your time and consideration

  Julien

  DDR3 PC3-8500, DDR3 PC3-10600 is bit 4GB 64 bit 8GB one.32

• Can what power supply I use with p6740f for the HP model computer?

  I'm looking to update the video cards and realize I also have to upgrade the power supply.  I can't tell if my processor is PCI, PCI Express, etc...

  Could you recommend some ish 500 watt supplies that would work in my computer.

  Thank you very much.

  mdb299 wrote:

  I'm looking to update the video cards and realize I also have to upgrade the power supply.  I can't tell if my processor is PCI, PCI Express, etc...

  Could you recommend some ish 500 watt supplies that would work in my computer.

  Thank you very much.

  MBD, welcome to the forum.

  The video slot is a PCI Express x 16.  You should not buy a video card that is larger than 8 "long.  Otherwise, it should not be in space.  I like XFX, BFG, EVGA, Sapphire and PNY in that order.

  I like the OCZ and Corsair PSU.  They are very good manufacturers.  Their products will provide a clean and stable power supply for your system.  I suggest to measure the existing PSU and comparing them to the one you choose.  This will eliminate the purchase of a power supply that does not fit in the space.

  Please let us know if this solved your problem or not.

• HP G620470CA: G62 - 470 CA do not load - power connector?

  I'm helping a friend with a laptop HP G62 - 470 CA.  It runs Windows 7Home Premium.

  I'm a geek of very experienced computer hardware, since 1968, but only opened about 10 modern laptops - always with the help of downloaded books.

  The laptop in question has only Wi - Fi networks, and I have only a Linux computer with a dial-up connection, so there is no way to connect the laptop directly to the internet from here.  And I can't view the videos.

  The problem with the power connector - a common, but I've read all morning and have not yet find an answer.  There seems to be some interactions between the power brick, power conenctor, battery and motherboard problems.

  Like many users, she found her power connector is intermittent, needing stirring so he could connect. As I had fixed the old laptop of his brother with a work of pig after it (soldered to the motherboard) power connector went wobbly, she asked me to look at.

  When she showed me the machine, the battery was too dead to allow start-up of the machine completely.  The charge LED is not come yet a moment, and there is no visible light on the power brick itself (I don't know if there should be any on this model).

  Put a meter outside the ring and the central axis, I found on 18.5V, positive pin, which looked good and is stable.  Biting moments and the cable has not changed anything.  It seemed that the power supply was the culprit.

  I got it home (where I only switched) and studied the issue for several days, download of HP service documents and discovered that HP had improved their design with a nest, wiring-harness-connected socket which is more shock-resistant and easy to replace.  I told her, and she has ordered a replacement of cylinders harness + listed the number of exact model; I installed it, in the process of learning how to work the little clips on the printed ribbons cables and using a printed diagram from the bottom of the computer to save all the small screws and clips, "with circles and arrows and a paragraph to describe."

  As both outlets had pinbacks resin-locked up, it was not possible to test connections.  A new differed from the former only by not having only not four tiny, rectangular holes around the hole of the central axis.  Food is not about to mate with these holes, and it lists a tension, so I wasn't expecting that to matter.  Maybe it was a feature for foreign cersions of the power brick, I thought.

  I plugged it in no light, but I left in it for awhile in case only the LED was not connected.  Start the machine (including ahd been unable to boot), fortunately, he started and showed 85% battery!  However, only, which is down with the time - there was no load, or at least no more.  I checked the voltage of the charger to see if it may have been damaged by an internal problem.  I found only 13, 75 - 14.01 volts from the outside of the ring to the central pin (positive)!

  Appearing to use a battery to try to light the LED of charging, I watched the cable brick and found that there are THREE sets of contact - the spindle, the outer ring and the ring INSIDE. Others showed:

  4.75 - 4, 85 volts from the inside of the ring to pivot (PIN positive)

  18.5 - 19 volts from the outside of the ring inside the ring (inside the positive)

  Whaa?  The 18.5 was what I expected, but it was between two rings and not between a ring and a PIN.

  And at this time, I noticed that from time to time, a blue (or white, I guess you'd call it) a DUCT on the connector turned on briefly, then turned red orange and outside.  Over time, it stayed white wheat longer, up to 8 seconds at a time, without showing any ability to charge the battery.

  Reading much more here and besides, I noticed that many others had similar problems involving all parts of four - battery, power brick cable, connector and motherboard.  I noticed the battery test can be found in the pages of support and pulled up to HP Support Assistant to test, but the reliable program planted at startup.  It was a version of 7.something.something, the support site said that later was 12.0, so I downloaded that.  However, I can't understand how to install it on the HP machine after it (on USB) transfer to the Linux machine, and the laptop cannot get Internet at home.

  WHAT can I DO to narrow down the problem?  If I know what voltages to which contacts, I can try to charging a battery nicad-multi, that would eliminate all the problems of power supply brick.

  The laptop battery carries a lot of numbers, but next to the 'made in china' legend is CQ42 HP-6.  A sticker says 112B213G6LA65D9CJ83, and another with a barcode PRTNHP234BK06312120141.

  That's a lot to read, I know, but I want to provide as much information as possible to help the members of the forum with kindness.  Again, the machine turns on, but fell to 18% of autonomy.

  Thank you all in advance!

  Thank you, Reo51st - that clears up a lot.  As you probably know, the diagram on the power brick shows the symbol for PIN and ring only (with pin posiitve).

  Since I posted this question yesterday, I have since set up a battery of 12 NiCd cells and jerry-rigged a connector with tin foil and a piece of cable insulation, and load worked.  Then I drove on Free geek, our very convenient source of Vancouver (and sink - they take your trash for reuse or recycling) of the old computer bits and $18 me have a new power brick.

  I therefore declare this thread SOLVED (by me), even if the info from Reo51st certainly would have made me more confident in the test so I saw him at the time.

• HP pavilion dv6-7010tx hard drive connector cable

  Chennai, India, where can get connector cable from hard drive for laptop model HP Pavilion DV6-7010tx

  Hello
  
  Cable SATA connector comes part of the hard drive.
  
  HP part number: 682063-001 for the material kit of compatible hard drive in your model.
  
  Go through page 27 of this manual:
  http://h10032.www1.HP.com/CTG/manual/c03582006.PDF
  
  http://m.eBay.com/ITM?Itemid=231308699162
  
  Concerning
  
  Visruth

• What type of power cable need it for a HP Pavilion TouchSmart Sleekbook 15?

  Title of the Moose - power cord

  What type of power cable need it for a HP Pavilion TouchSmart Sleekbook 15?

  Hello

  Check with the help of HP, their documentation and online in their forums.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Something like this for example:

  http://www.chargerbuy.com/original-HP-sleekbook-15series-AC-adapter-65W-cord.html

  Rob - SpiritX

• Power connector at right angle for laptop HP 2230 s?

  Is it possible to get an adapter at right angles to the power connector DC for my laptop HP 2230 s?

  The connector on the DC power cable that goes into the laptop out the path to the side (a good 2.5 "), which, besides being bulky, resembles an accident waiting to happen. On my old Fujitsu, the connector was barely right angle type, it came out at all, and was not a danger to catch on anything and damage the socket or the plug. This type of connector puts also much less strain on the DC input jack, as he does not act as a lever for bit.

  I've seen at right angles to the adapters for different types of cable (you plug your cable on one end and the other goes in the computer), like this:

  

  I hope you get the idea. In any case, what I would like is an adapter for the type of connector used on my HP laptop. The type of connector seems to be pretty standard in the range, so an adapter can be used with many models of HP. In the end, I hope that HP will change cables from their power supplies for laptop to come with these types of connectors at the ends, but in the meantime, is possible to get an appropriate, either through HP or a third party adapter?

  Thanks in advance to anyone who can offer suggestions!

  http://www.bixnet.com/cntlc90.html

  I know this is an old thread... but since nobody listed everything that might work, I found this on the same site listed zetto.