Similar Questions

• HP pavilion 15-e034tx: how to choose the right RAM for laptop

  How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

  Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

  1-4 + 4 GB
  2-4 GB + 8 GB
  3-8 GB + 8 GB

  Thank you

  From the Manual:

  Two customer accessible/upgradable memory module slots

  Support for dual channel DDR3L (1600 MHz)

  Support 8192 MB RAM system in the following configurations:

  8192 MB (8192 MB × 1, × 4096 MB 2)

  Manual download link

  See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

  4 GB (PC3L, 12800, 1600 MHz) 691740-001

  http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

  A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP 15-f004dx laptop: power on error code 55133891 for laptop HP 15-f004dx

  power on the 55133891 error code (my power on password forgotten)

  Hello:

  Enter the unlock code...

  40891217

• (Redirected) New Inspiron 5558, right Angle DC Power adapter

  I was looking for an adapter at right angles to the DC power jack.  The diameter of the plug is 4.5 mm (0,178 inches in diameter).  The existing plug is straight and the cord Gets a lot of stress at that time here because the female connector is located on the side of the laptop rather than the back.  A right angle adapter will relieve this stress.  There are several right angle adapters, but I couldn't find the right necessary size, which is much smaller on this laptop.

  Hi Pete Colorado,.

  Please repost this in the laptop computer Forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• Size of the Inspiron laptop power connector

  No one knows the size of power on new computers 3000 Dell laptops Inspiron 15 series connector? Old laptops Inspiron uses a size of 7.4 x 5.0 mm connector. The news that I have, which is a model 3225, is much smaller.

  Thanks for your help,

  Jim

  Thank you ejn63 and sparksdls for the quick responses, that's what I was looking for!

• What power connector cable do need me for a portable 17 want?

  Hello

  I have a laptop 17 HPEnvy (J053EA) and I need to replace the DC power connector.

  on page 84 of the manual below is says I need 720240-001 if the graphics memory is discreet or 720241-001 if the graphics memory is UMA. How can I say than I need?  If this can help the rear of the connector has 10 pins in 2 rows of 5

  http://h10032.www1.HP.com/CTG/manual/c03922401.PDF

  Your laptop has discrete graphics so 720240-001

  This is what yours looks like?

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Dv6500 laptop - no Standard disc HARD SATA/power connectors

  Hi - I decided to upgrade my 80 GB Western Digital Scorpio 2.5 inches with a Seagate Momentus 2.5 inch 250 GB. The Seagate as I thought, were the standard SATA power connectors. The connectors slide on, the same thing as what I saw on all SATA 3.5 Desktop drives. We WD Scorpio, the pins are divided and snap into the motherboard. So I don't think I can use the Seagate, what 2.5 inch disks have will work with the DV6500? I thought that SATA SATA.

  Duh! Answered my question on. Looked at training, I got out and noticed there is a converter of pins of connectors SATA slide standard split connectors that facilitate their insertion in Notepad. just removed the old WD drive converter and added to the new Seagate.

• -Power connector - Satellite Pro M70 of spare parts original purchase

  Hi all

  The power on my laptop Toshiba Satellite Pro M70 connector broke and my laptop is out of warranty...

  I want to buy a replacement part, where can I get an original piece of toshiba replacement?

  Here is a picture of the part:
  http://I264.Photobucket.com/albums/ii183/lkjh_g/IMG00055-20100131-1907.jpg

  Thank you

  Hello

  You can get all the spare parts Toshiba since an official authorized service provider. I n don't know where you life, but if you bought your laptop in Europe, you can find here an ASP in your country:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Just speak with technicians to get the right spare for you.

  Alternative under Feliks wrote that you can search on eBay for second hand parts. Sometimes you can get really good deals for this. ;)

• Satellite A30 151: motherboard power connector broken

  I have an old toshiba A30-151 that has fallen down a while a go because of the power connector snap into the power socket. This had happened before at the back of the power supply, but I managed to solder back together. Unfortunately it broke again and has so the PIN inside the socket.

  So after having managed to get into the nitty gritty of the laptop and have the motherboard out, I had a replacement for welded to the. Problem is there is a missing piece. I have a picture of this here:

  http://i150.Photobucket.com/albums/S83/Dalio1984/motherboard.jpg

  It was a picture of him before you put the Jack on. The chip missing normally goes where the right red circle is. Now I have not tested yet cause I have to go through the process of implementation of back together which is tomorrow nights work. I was wondering if it will work without it, if I can get a replacement part for this, or if I could figure out what it is (for example a resistor) replace it with a piece of stock to its equivalent.

  I realize this is probably a little extreme, but any help in this matter would be appreciated.

  Hello

  A figured out if this will work without this chip?

  I don t think that someone here in the forum will be able to give you an answer exactly.
  The drawing of the motherboard is necessary and that these documents are not easy to find because the manual are not:(pour usage public)

  So I hope you can find more information in internet

  Good luck

• poorly supplied power connector

  Just got my thunderbolt and macbook pro screen, but a little puzzled that the laptop power connector that comes out of the back of the display unit is for a macbook not a macbook pro (see photo below of the Web page) - confused.

  Am I missing something? I don't remember when put my order together that I had to say anything... Do I need an adapter?

  

  Well, the MagSafe connector was used by the old MacBook, MacBook Pro and MacBook Air, but Apple MagSafe 2 released later and recent Macs have more than the connector. However, you can get the MagSafe adapter MagSafe2 to use this port, assuming that you have a MacBook Pro with the Retina display.

• Workstation HP Z620 dual xeon: really only 1 6-pin power connector on the graphics card?

  Hello

  I have a question about the HP Z620 workstation.

  recently bought a dual xeon with 960 GTX installed on the 6-pin connector.

  as I can't find any other power to use nor on the power connector

  or nowhere on the set, I wonder how a graphics card must be powered only

  needs

  1 x 8-pin

  or

  1 x 8-pin + 6 pins

  or

  2 x 8 pin?

  I know there are some discussions about this in this forum, but I did not understand

  the solution. Some said there are adapters to go 6-pin to 8 pin (or 6pin to 2x8pin)?

  But how is that possible?

  like many, I know, 75 watts are max of the pci-e connection, 75 other watts Max for 1x6pin.

  so plug any adapter, 1x6pin for graphics cards that need much more power would be

  According to the standard / danger, right?

  and what about graphical installation double?

  would be happy if someone around could help me with this.

  best regards

  Chris

  The search box on this page by default search only this forum, and it is very convenient.  If you type "extra", you will find a lot of info.

  The Z620 has two of these 6-pin cable, and HP got creative and molded into two empty containers down to the black plastic fan holder before.  So, one is being used by you and the second is sitting there plugged and similar, it is used, but it is stored just it did nothing... the fan is powered differently.

  These extra HP 6 - pin PCIe power cables are not standard ATX... they are better.  The ATX standard is 75 watts can go up to the card out of the slot, and another 75 watts can come via the additional 6-pin cable.  HP 6-pin cable can do a bit more.

  This is the message that you want to read, and there there details that were not in any of the HP manuals that I searched through, but the answer was on the label of Z620 power supply.  12V 18A each, plus adding info on some special HP adapters that allow you to take a HP 6-pin and divided to two 6-pin connectors or cable HP 6-pin connector 8 pins.  Watch here.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091#M12740

• Socket for laptop in the U.S..

  I have two questions... the first is "what is the machine equivalent to the United States to the PSAR9A-031001 and what are the numbers? just in case where I need to get anything done on this machine or get parts.

  The second is... "what kind of power cord should I in the USA as I have a three pins one right now for the Australia but I know I'll need the other for there?

  Thanks for any help you can provide.

  Hello

  Model PSAR9A-031001 number seems belongs to the Satellite A500/031
  There are some models of Satellite A500 out too for the American market.

  Toshiba on this page we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I think that if you have a problem with the laptop then you should get in touch with a local ASP in the United States for some spare parts, etc.

  > The second is... "what kind of power cord should I in the USA as I have a three pins one right now for the Australia but I know I'll need the other for there?

  As far as I know, the laptop uses a universal AC adapter and it should work in the United States too.

  Welcome them

• W510 power connector loose

  Hello world

  I got a W510 renovated for a few weeks. Recently, the power connector at the back of the laptop computer between the battery and the heat exchanger is loose. How can I solve this problem?

  Thank you

  Wei

  Here is the Service Manual: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/63Y0536_05.pdf

• Drivers for laptop HP 2000

  Hello

  I have a HP 2000 on which I just installed Windows 7 Home Premium 64-bit. The wireless and ethernet drivers were not recognized by default, so now I'm in the quest of trying to find the right drivers for it.

  I tried a bunch of drivers associated with HP 2000 laptops, but since there are at least 3 different manufacturers - atheros, ralink, realtek - I was a bit confused and none of them seem to be recognized.

  I was able to extract the product number of the laptop to better refine my search, but searching on the HP support page, I get redirected to a laptop (HP g6) that does not look like mine... so still a bit consufed.

  HP 2000

  3115 AEC13432GR1

  AU08E1D

  looks like this: http://www8.pcmag.com/media/images/330813-hp-2000-2b19wm-angle.jpg

  Hope you guys can help me.

  Thanks in advance!

  Paulo

  Open the Device Manager. Locate a device without driver installed. Right-click on it and select Properties. We need is the character string PCI\VEN to correctly identify the device. The following image is an example that shows the tab and the drop-down list, you select. Do the same for each device and post it here.

  

• HP G620470CA: G62 - 470 CA do not load - power connector?

  I'm helping a friend with a laptop HP G62 - 470 CA.  It runs Windows 7Home Premium.

  I'm a geek of very experienced computer hardware, since 1968, but only opened about 10 modern laptops - always with the help of downloaded books.

  The laptop in question has only Wi - Fi networks, and I have only a Linux computer with a dial-up connection, so there is no way to connect the laptop directly to the internet from here.  And I can't view the videos.

  The problem with the power connector - a common, but I've read all morning and have not yet find an answer.  There seems to be some interactions between the power brick, power conenctor, battery and motherboard problems.

  Like many users, she found her power connector is intermittent, needing stirring so he could connect. As I had fixed the old laptop of his brother with a work of pig after it (soldered to the motherboard) power connector went wobbly, she asked me to look at.

  When she showed me the machine, the battery was too dead to allow start-up of the machine completely.  The charge LED is not come yet a moment, and there is no visible light on the power brick itself (I don't know if there should be any on this model).

  Put a meter outside the ring and the central axis, I found on 18.5V, positive pin, which looked good and is stable.  Biting moments and the cable has not changed anything.  It seemed that the power supply was the culprit.

  I got it home (where I only switched) and studied the issue for several days, download of HP service documents and discovered that HP had improved their design with a nest, wiring-harness-connected socket which is more shock-resistant and easy to replace.  I told her, and she has ordered a replacement of cylinders harness + listed the number of exact model; I installed it, in the process of learning how to work the little clips on the printed ribbons cables and using a printed diagram from the bottom of the computer to save all the small screws and clips, "with circles and arrows and a paragraph to describe."

  As both outlets had pinbacks resin-locked up, it was not possible to test connections.  A new differed from the former only by not having only not four tiny, rectangular holes around the hole of the central axis.  Food is not about to mate with these holes, and it lists a tension, so I wasn't expecting that to matter.  Maybe it was a feature for foreign cersions of the power brick, I thought.

  I plugged it in no light, but I left in it for awhile in case only the LED was not connected.  Start the machine (including ahd been unable to boot), fortunately, he started and showed 85% battery!  However, only, which is down with the time - there was no load, or at least no more.  I checked the voltage of the charger to see if it may have been damaged by an internal problem.  I found only 13, 75 - 14.01 volts from the outside of the ring to the central pin (positive)!

  Appearing to use a battery to try to light the LED of charging, I watched the cable brick and found that there are THREE sets of contact - the spindle, the outer ring and the ring INSIDE. Others showed:

  4.75 - 4, 85 volts from the inside of the ring to pivot (PIN positive)

  18.5 - 19 volts from the outside of the ring inside the ring (inside the positive)

  Whaa?  The 18.5 was what I expected, but it was between two rings and not between a ring and a PIN.

  And at this time, I noticed that from time to time, a blue (or white, I guess you'd call it) a DUCT on the connector turned on briefly, then turned red orange and outside.  Over time, it stayed white wheat longer, up to 8 seconds at a time, without showing any ability to charge the battery.

  Reading much more here and besides, I noticed that many others had similar problems involving all parts of four - battery, power brick cable, connector and motherboard.  I noticed the battery test can be found in the pages of support and pulled up to HP Support Assistant to test, but the reliable program planted at startup.  It was a version of 7.something.something, the support site said that later was 12.0, so I downloaded that.  However, I can't understand how to install it on the HP machine after it (on USB) transfer to the Linux machine, and the laptop cannot get Internet at home.

  WHAT can I DO to narrow down the problem?  If I know what voltages to which contacts, I can try to charging a battery nicad-multi, that would eliminate all the problems of power supply brick.

  The laptop battery carries a lot of numbers, but next to the 'made in china' legend is CQ42 HP-6.  A sticker says 112B213G6LA65D9CJ83, and another with a barcode PRTNHP234BK06312120141.

  That's a lot to read, I know, but I want to provide as much information as possible to help the members of the forum with kindness.  Again, the machine turns on, but fell to 18% of autonomy.

  Thank you all in advance!

  Thank you, Reo51st - that clears up a lot.  As you probably know, the diagram on the power brick shows the symbol for PIN and ring only (with pin posiitve).

  Since I posted this question yesterday, I have since set up a battery of 12 NiCd cells and jerry-rigged a connector with tin foil and a piece of cable insulation, and load worked.  Then I drove on Free geek, our very convenient source of Vancouver (and sink - they take your trash for reuse or recycling) of the old computer bits and $18 me have a new power brick.

  I therefore declare this thread SOLVED (by me), even if the info from Reo51st certainly would have made me more confident in the test so I saw him at the time.