what replaces the Cisco Spectrum Expert Wi - Fi

It seems that this product has been discontinued?

What do people use out there with similar functionality?

I've never used this product allegedly reading was friendly, so you didn't have to be an engineer RF to understand and put to good use.

If my client has finally decided to undertake a mission to search for sources of interference, what do you recommend using mere mortals?

What engineers use?

Thank you.

This is not the end of life... It's just a change of product number:

Cisco® Announces a change in the product reference numbers for the Spectrum Expert for Wi - Fi, card Cardbus. It is a product part number change single ad. Customers will experience no change in functionality when you use the new product ID.

Yes, it is as a hardware (previously called cognio cardbus) and combination of software (cisco spectrum expert software). After the acquisition of Cisco of Cognio, it is now called just Cisco spectrum expert (with the mention of "cognio").

Cisco has also incorporated this same functionality to its 3500 Series (called cleanair technology) last access points, so you can have the same GUI of the expert of the spectrum in the toilet if you have 3500 AP series without having to spend a few dollars and material additional to see interference etc.. Every 3500 AP in the law network autonomous "spectrum analyzers" and you get all these features with only the cost of AP!

concerning

Joe

Tags: Cisco Wireless

Similar Questions

  • Cisco Spectrum Expert

    Hello

    Can use us Cisco Spectrum Expert to conduct studies of site? If this is not the best tool, suggestions are more than welcome.

    Basically, what I am after is the signal strength and SNR values.

    Thank you

    Andrée

    The AirMagnet Wireless Site Survey

  • What replaces the Mail Photo in PSE 12?

    PHOTO E-MAIL was helpful to attach captions to the photos sent by e-mail.  What is the alternative to PES 12?

    Picture Messaging is the same as ever in PSE 12. Have you moved to a mac? It has never been picture messaging in the mac version, but mail OS X includes models of stationery that you could use.

  • What replaces the Sidebar gadgets

    original title: replacement of Sidebar gadgets?

    Because gadgets are no longer supported, what is their alternative?

    The following links give information about:

    http://Windows.Microsoft.com/en-us/Windows7/what-happened-to-Windows-Sidebar

    http://Windows.Microsoft.com/en-us/Windows7/desktop-gadgets-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows/downloads/personalize/gadgets

  • What replaced the motion Math Script

    Again, I've read an old AE book "Angie Taylor - Creative After Effects 5.0

    She was going through a project which involved using MOTION MATH scripts to synchronize the audio levels of mouth shapes. It was described as being very simple to use.

    Given that I could not find the Script where she said it would be, I rose Motion Math help online and came across a post from 2007 which stated that it was abolished.

    What is now used instead it or how I can recreate what he used to do.  I imagine that something using expressions probably replaced.

    Until you bark at me on reading such an old book, these books show a few interesting examples and even some stuff that only new books, that I learned how to use Motion Sketch to animate an object on the rhythm of the music in real time.  You can get these old books for less than $5 and a little for even a $1 on Amazon.com and given that the program was more simple then the learning curve seems to be less overwhelming.

    I use CS4 on Mac, and I have AE CS4 Visual effects and Compositing of Mark Christiansen

    Thanks in advance

    Cris: You could say that motion Math was replaced by expressions.

    Expressions are not only much more deep and versatile. Unlike the Math movement, they are 'live' in the sense that they continue working without having to the Cook into keyframes. Allows you to create live connections between properties, instead of an operation as a query time Math script.

    In this particular case, you can use the "Convert Audio to keyframes" keyframe Assistant on the audio layer. This will create a new layer with keyframes that represent the sound levels for left, right and two channels. You can then use expressions to connect any property of any layer of these values and keep the expressions of refining as much as you want. I fear that the details are beyond what I could explain in one post, but there is even a whole book on expressions now: after effects Expressions, by Marcus Geduld. There are a bunch of other resources as well. Try using After Effects expressions section, which surely has links to more information about expressions.

  • what replaces the flash module

    What I do when I get a message that there is a missing module or flash is required to load the full page? Is it safe to install flash or what can I use instead that would solve this problem?

    Do not pay attention to the news of a website, they can be malicious. There has been many vulnerabilities reported with Flash. That said, in my experience, I have no problems with Flash Player. Just be sure that you get the download from web site https://get.adobe.com/flashplayer/otherversions/ to Adobe

    and go to Preferences system Flash when you get a notice to update, it check it and do the update within this preference pane. Often there are pop - ups advertising in browsers with update of false alarms.

  • What replaces the project to open in LR

    At the opening, I used to assign new pictures to a project - LR is the best approach to import pictures while adding a keyword (name of the project) and create a smart collection to group these new photos?

    Key word is certainly a way to do it.

    If you have a keyword, you need also a smart collection to group these new photos; Simply use the keyword.

  • What replaces the bar of menus CS6 spry in dreamweaver creative cloud 2014?

    Hello


    Previously, I used Dreamweaver CS6 and the widget in the spry menu bar (horizontal).  I don't see this in Dreamweaver CC 2014.  I'm looking for the Panel to insert (jQuery UI) but do not think that a bar of menus spry equivalent is listed.

    Is there an equivalent built into Dreamweaver CC 2014?

    Dropdown based CSS menu

    CSS Menu - JSFiddle

    Drop-down menu advanced with gradients, CSS & transitions

    Drop-Menu CSS Horizontal - JSFiddle

    Pop-Menu Magic3 of PVII (commercial extension of DW)

    http://www.Projectseven.com/products/menusystems/pmm3/index.htm

    jQuery Superfish

    http://users.TPG.com.au/j_birch/plugins/SUPERFISH/

    Receptive iconic

    http://www.dynamicdrive.com/style/csslibrary/item/responsive_iconic_menu/

    Receptive hybrid

    http://www.dynamicdrive.com/dynamicindex1/responsivehybridmenu/index.html

    Nancy O.

  • What replaces the browser

    Hello

    I've just updated in illustrator 10 and is the loss of the browser to be quite annoying. Realizing super smart workflow analysis happening by a huge company before eliminating the browser: where is the best method that takes place of the browser?

    Thank you, I realize that he have not yet found and feel a little stupid needing to ask.

    Garrett

    If you mean the browser panel, it is still there in all versions of Illustrator after Illustrator 10. Look under the window menu.

  • Aironet 3500: Spectrum Expert Mode of connection

    How can I connect to a 3500 to see the analysis of the spectrum? The manual says to download version 4.0 of the software Cisco Spectrum Expert, but the latest version is 3.3.52. What Miss me?

    I want to make the most of these new APs!

    Thank you

    Andrew

    It is still Beta code.  Not only do you have the Beta code, but a key

    as well.  Once you have installed, you connect to your controller and

    change the mode of your AP - SE connect and reboot the AP.

    Then you go to the AP, copy another "key" in the AP and also

    collect the IP address if the DHCP.

    You paste the key into your Spectrum Expert running on your

    laptop, as well as the IP address of the AP.

    Then, you can remotely see your spectrum.

    I've done this before, because I tested a 3500 for a few weeks before

    refer to Cisco.

    I am impressed... It is definitely an interesting option.

  • What is a VPN solution that is more stable than IPSEC VPN? What is the latest version of VPN client recommended for Windows 7 & 8 users?

    Hello

    I would like to ask a few details & concerns on our existing VPN configuration.

    1. What is the Cisco VPN client recommended for users of Windows 7 and 8? Is there an official documentation for this Cisco? We currently use customer VPN Ciso 5.0.7.

    2. we are running IPSEC VPN with only 1 gateway & only local authentication (No ACS) for our client. Recently, we have some concerns that they are the VPN connection is down. Whereas if I'm the one connected to the VPN, my connection is stable. Is there any point that we must consider up in the network. Is there a better configuration or solution that we could recommend to the customer as SSL VPN?

    3. If you want to use SSL VPN anyconnect secure mobility & we want to implement redundancy on the FW, how will the license work?

    Thank you!

    An AnyConnect-based VPN is the replacement recommended for remote IPsec VPN access. (source)

    AnyConnect can use SSL or IPsec (IKEv2) for transport.

    For an ASA redundant firewalls (running 8.3 (1) or later) any permit required AnyConnect are shared between them. that is, you just buy licenses for a member of the HA pair. (source)

  • What is the best replacement for my laptop hard drive?

    Hi, should what replacement hard drive I buy for my laptop HP G62-a016sl, considering the price/quality ratio? I don't want to spend more than 60 euros/dollars.

    (if you want to know why I need, see this post: http://h30434.www3.hp.com/t5/Notebook-Recovery/Creating-and-using-a-Factory-Recovery-Disk-of-a-simil... )

    I would like to know the opinion of an expert. (Thank you!)

    You can get the same or similar, Toshiba you now - with 3 year warranty:

    http://www.Newegg.com/product/product.aspx?item=1Z4-000b-00003

    Western Digital is another brand I like. With a 5-year warranty:

    http://www.Newegg.com/product/product.aspx?item=9SIA2W014M8024

  • What is the life expectancy of the battery in the pen of Apple? Can it be replaced or do I need to buy another pen?

    What is the life expectancy of the Apple pencil? The battery can be replaced or do I need to buy a new stylus?

    According to iFixit (of https://www.ifixit.com/Teardown/Apple+Pencil+Teardown/52955 )

    • The pencil is clearly not intended to be opened or repaired; You can't get inside without destroying the device.
    • The layers of plastic and metal holding the interior components are impossible to remove without grinding.
    • The battery enough for a 12 hour race, is impossible to replace, which gives the device a limited life expectancy.
  • My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

    My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

    I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

    Thank you guys

    A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

    You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

    Good luck!

  • Replaced the cable. Now, the screen does not work. What could be?

    The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

    My setup

    [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

    with a key USB drive and Ethernet connected to the back of the Thunderbolt display

    Already tried this

    • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
    • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
    • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
    • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
    • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
    • Restarted my laptop. No change.
    • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
    • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
    • Using the newly purchased cable as a Thunderbolt external cable works fine too.

    Question

    Does anyone have suggestions on what to try next?

    The logic card goes into a sort of locked mode when you replace the cable?

    Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

    Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?


    Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

    Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

    The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

    Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!

Maybe you are looking for