What Satellite A300 supports the HDMI-CEC

Similar Questions

• Satellite A300 - using the HDMI port as an input

  Hello

  Currently user of a Satellite A300-1OT, I would like to know if there is a way to use the HDMI port as a port of entry, in order to connect my blue-ray on my computer drive

  THX
  Ludo

  Hello

  The HDMI port is a video output port!
  It sends video and audio signals and doesn't receive signals

  Simply said; No, that's not possible

  Good bye

• Update BIOS on Satellite A300 disabled the touchpad in WinXP

  Hey

  I just installed XP on my A300, the installation went well, until I updated the BIOS to to 1.7. After that, the touchpad is irrespeonsive, which means that it is displayed in the Device Manager, but does not.

  I tried the Fn + F9 key and after a long driver Hunt, I decided to re - install Windows XP, to locate where the problem was.

  I also tried resetting the BIOS by default, but once again, without a bit of luck.

  The touchpad still does not work.

  Is there a possibility to downgrade the BIOS?

  Hello Johan

  Can you please tell me what Satellite A300 you exactly (A300-xxx)?
  What model is your laptop?
  Almost all cell phones of the A300 are WXP supported and I can not imagine that the update of the BIOS can kill touchpad. It's very strange.

• Satellite A300-17N - the CPU multiplier does not change under load

  Hello

  I have Toshiba Satellite A300-17N. Yesterday, I noticed that my CPU does not change its multiplier under load.
  I have used programs like premium 95 and Orthos CPU load and programs such as CPU - Z and Everest.

  The multiplier blocked on 6 and do not change its value.
  Under load the multiplier should change its value to 13, but it didn't happen.

  In this case my CPU works on 798 MHz (133 x 6) 1732 MHz (13 x 133) instead.
  I will be grateful for any advice.

  Hey Buddy

  I put t know what you are talking about, and I don t know if you're up-to-date on CPU technology but the laptop was equipped with the Intel Pentium Dual - Core T2370 processor.
  I recommend the Intel page on Intel Dual-Core T2370 properties.

  This processor supports Enhanced Intel SpeedStep technology.
  Do you know what it is?

  Here is a short info from the Intel page:

  + Enhanced Intel SpeedStep technology allows the system to dynamically adjust the frequency of voltage and core processor, which can translate into a reduction in average energy and decreases heat production average. +

  I think it should be clear now.

• Re: Satellite A300 PSAGCE: need HDMI Controller driver for Windows XP

  I have Toshiba A300-23d (PSAGCE) and I have downgraded to Windows XP.
  Everythink work fine aprat from controller HDMI.

  Need controller HDMI for Windows XP.

  Hello

  The driver for the HDMI Control Manager is only available for Vista 32 bit and 64 bit!
  There is no special driver HDMI for Win XP!

  But why are you needed it?
  I m not an A300 owner but my other Satellite was equipped with HDMI port and I installed Win XP too.
  I n t need a driver HDMI in order to use the HDMI port.

  I have connected my external monitor via a HDMI cable and everything works perfectly!

• Satellite A300 - is the recovery disk contains all the drivers?

  I bought a new Satellite A300 and now I have to reinstall Windows Vista. My question is:

  Through the recovery disk I already have all the necessary drivers for my computer?
  What I have to download them one by one in line?

  Thank you for your help

  Ciao

  Michele

  Hello

  Yes, the Toshiba Recovery disk contains all the drivers and tools for your laptop. After using the Toshiba Recovery disk, you have the same settings that you have started the laptop the first (out of the box). This means that the disc contains a picture of the factory settings.

  The disc is very easy to use: you only have to boot from it and follow the instructions on the screen. Windows, and all drivers will be reinstalled in a few minutes.

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• < Duplicate > what languages will support the lollipop?

  Android has been its interface translated into 57 languages since version 2.3 (now the list is still larger), on the version of kitkat there notable omissions (I am touched by the catalan, but there are others).

  Which is the list of languages that have the lollipop next android version? I hope there is a good news for us.

  Hello! I've got Motoral G 2014 and it does not support the Catalan language. Why is this?

• Satellite A300 - point the mouse jumps around

  Hi guys,.

  For some reason any my A300 worked just perfect and all the drivers Toshiba disspeared.
  So I have no more function keys, press the start/stop utility and so on.

  I managed to install again but synaptic touchpad driver, didn t turn off.
  I disalble and now the mouse pointer jump around like a wink on the active guides. It's driving me crazy!

  Any help or ideas how I can work on it?

  Thank you
  SEBS

  Hello

  To use the control of Toshiba and the FN keys buttons, you need to install the VAP (value added package) and the Flash Cards Support utility!
  These two tools are important if you running Vista or Win 7.

  You can also configure the touchpad again after installing the driver Synaptics and Alps.

  Please note that you can configure the touchpad in Control Panel-> mouse->-> properties pointing device.

  You will find a few options regarding the sensitivity of the touchpad!

• Satellite A300 (PSAG4E) - the highest point of the multimedia keys does not work

  Hello

  I have a problem with my computer (Satelltite A300 PSAG4E windows vista), can't do on and off the highlight of multimedia keys, I don't have any tab to highlight the computer in the assistance program.

  will be very happy if you help me!

  Hi hellowin,.

  What multimedia keys tell you exactly? Do you mean the buttons light between the keyboard and the screen?
  In addition, it would be interesting to know what the problem is exactly

  In any case, if you have a problem with these buttons I recommend reinstall Toshiba Value added Package! :)

• Satellite A300 - install the secondary hard drive

  Hi all

  I'm new to the forum.

  I was thinking about adding a second hard drive of my laptop.
  I saw that there is a single disc and a space for a second

  Is this possible? If so, what drive would be worth?

  Thank you

  Hello

  In my opinion this is not possible.
  To me, it seems that there is no second connector and to the 2nd HARD drive controller.
  There is a second HARD-drive bay because there are different models A300 with a different hardware configuration and motherboards, but the same top and bottom covers, so there is a 2nd HARD drive Bay even if the connectors are not available.

• What USB port supports the 3 Protocol?

  Hi all, what ports in W520 support USB3?

  There should be 2 x 3 USB ports on the W520. They are blue and should be on the left side of the computer. Should be easy to find if you are looking for the two blue USB ports.

  -gan

• What customer VDM supports the CAC cards?

  I have the latest ESX and VMware View and vCenter installed as well.

  He is everything is configured such that I can present through the client discovers a couple

  Windows desktop computers and connect to them.

  However after creating a keystore and certificates required for the VDM server.

  and allowing chip card (even forcing him), I find that I can connect is no longer

  with the Client to display at all.   We're supposed to to bring up a dialog box PIN code when

  He sees a drive and a valid card, when the view is installed on ActivClient

  MiddleWare (as I have), but instead mine always just says: it can not

  connect to the VDM, because a smart card is necessary.

  I saw that in some document referring to having to use a VDM

  client which is not supported "Online desktop".   However, I do not know

  How called, what version, what it has packaged with or where to download

  he leave.  I would like to try it and see if the problem I have is with that,

  or something configuration, but I have no idea where to look.

  Someone knows something about it or have some ideas/suggestions?

  Thank you!

  The customer display Windows version 3.0 and later support smart card.  If you are not prompted for your card chip PIN then your server to view or your client connection is not configured properly to use authentication by certificate.  You did it for the view connection server, ensure that you went to ensure all the steps mentioned in the Administrator's Guide?  One thing people tend to forget (or spelling) is useCertAuth = true in the locked.properties file, as mentioned in the guide.  And for the customer, are you sure that set you up authentication by smart card properly?  To check if certificates are available for the customer to use, you can go to start > Control Panel > Internet Options > Content > Certificates > personal and view certificates.  When you insert a smart card into the reader, Windows copies the certificates on the local applications computer as the Client of the view can use them.

• Satellite A300: upgrading the graphics card question

  HI :)

  I am a new user of portable computers...
  Like nvidia geforce graphics cards can be installed in my Sat A300? extent to which max mem I can install?

  No, the graphics card can not be upgraded.
  In most cases (with the exception of the MXM module) the GPU is soldered on the motherboard and I don t think you could remove it.
  But even if you were able to remove the chip, you won't find any GPU that would be compatible with laptops card mother and BIOS.

  So in my opinion don't forget this upgrade

• What apps to support the pencil?

  I would like to know wh applications support for the pencil on the iPad Pro.

  A small list below:

  Notes

  Mail

  Pixelmator

  Paper prepared by FiftyThree

  uMake

  Adobe Comp CC

  You can do some research on the Internet as well.