What services are added to the Windows system?

Similar Questions

• "Another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Please, anyone can help as I don't know what to do? I am running Vista to the Windows Welcome page
  I am the administrator and I have no other computers attached to my laptop?
  I use the same USB port to connect to internet, but recently, I had to try another USB port I get the above error message.
  I have no idea how to do to correct the situation and would appreciate guidance step by step.
  Thank you.

  Hi RDCICON,

  1. which device you are connected to the USB port?

  2. you still get the same message when you connect the usb device or use the device on another computer?

  Method 1:

  You can try to run the tool built into Vista Network Diagnostics. To do this, click Start, go to network and select network share.

  On the left side of the window select the diagnosis and repair.
  It should help to find which device is listed with the duplicate IP address.

  Method 2: Release and renew the IP address by following these steps.

  a. Click Start. Click Run, type cmd, press ENTER.

  b. at the command prompt, type the following command and press ENTER

  ipconfig/release

  ipconfig / renew

  Method 3:

  Check and confirm the DHCP client service is started and set to automatic.

  If the DHCP client service is not running, then set it to autostart. Steps to set the auto service:

  a. click the Start button

  b. type services.msc in the search box.

  c. search for DHCP client and set it to automatic and make sure that it is started.

  Method 4:

  Reset the router and see if the problem persists.

  You can refer to the 3mentioned of general troubleshooting method in the following article to reset the router.

  http://support.Microsoft.com/kb/956196#Gm3

  You can also see the producers of the router manual or contact support for additional assistance.

  Hope this information is useful.

• What (s) are accurate on the Windows 2000/XP startup disk?

  a. the startup disk can be used to boot the system on Windows 2000/XP desktop when Ntldr is missing from the hard drive.

  b. the startup disk can be usedc to start on the desktop, even when the C:\Windows folder is damaged.

  c. bootable floppy can be used instead of the startup files in the root directory of the active partition.

  d. the startup disk can be used to start the desktop, even when the partition table is corrupted.

  Let's see what Microsoft support engineers are answers!

  Then I have a few questions myself...

• What services are free of charge and what services cost money?

  What services are free of charge and what services cost money? Somehow I started to receive an invoice for a service I don't remember to help, nor do I remember asking to add to my internet service. I'm always afraid that I don't know what's free and what costs. I know that Microsoft programs would cost something, and probably tech services, but is there something else?

  To find information about your services:

  1. Sign in to billing and account management Web site.
  2. Under your services, click a service.
  3. Under your payment methods, click on the mode of payment listed to view your Bill.

  MSN Premium is a service that would require a monthly fee

  Hotmail more would require a monthly fee

  Windows Live services are free

  Microsoft Answers is free

• What processors are compatible with the HP G62-b09SA notebook PC.

  What processors are compatible with the HP G62-b09SA notebook PC. Also I'm under 64-bit Windows, but on the HP website, it indicates that the maximum amount of memory is 4 GB, why?

  Hello

  Here is the link to the service manual for your laptop

  http://h10032.www1.HP.com/CTG/manual/c02542102.PD

  See page 1 for a list of supported and also taken processors on this page under the heading memory, it is said that the laptop can support up to 8 GB of memory.

  Paul

• How do you remove Trojan horse from the Windows\system\svchost.exe file located?

  How do you remove Trojan horse from the Windows\system\svchost.exe file located? I worked on this problem for 5 days. I've tried everything except wipe the hard drive completely and starting over. Windows xp pro sp3

  I bought a new diagnosis program and quarantined the virus once it has been identified. I tried to remove the virus in several ways, but it comes back. The best way that I thought would work enter safe mode and by changing the attributes of the svchost.exe file and then delete and checked the registry AWI hwo to the Web site, but it continues to be problematic.

  Hello

  During the uninstallation of antivirus/antispyware/security programs always check for an uninstall
  tool and/or removal instructions special to avoid leftovers.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146
  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What Services should be enabled for Windows 7 with IE 8

  What SERVICES must be enabled for Windows 7 with IE 8.  I am work out WiFi in a remote area and you have activated certain Services to improve my connection and the use of a printer.  Which SERVICES should be on for Windows 7?

  What Windows initially sets up MORE than what you need in order to get features of your computer and its peripherals... nothing else does not count...

• What motherboards are compatible with the s1400-103?

  What motherboards are usable in the S1400-103, laptop PS140E-03CT 0 - EN? The center pin for the power supply DC to pronounce on mine. Toshiba said that the repair is not possible and so could charge me £370 for a new.

  Hi ian

  I was not being able to find an exactly number description or a part, but you can it search the net or even try to get the info of service partner.

  By the way: do you really want to exchange one?

• Verkenner.exe: What is Verkenner.exe in the Windows Vista startup files?

  What is Verkenner.exe in the Windows Vista startup files? This is a Microsoft file that must run?

  If you know the location (or the search to find it) and then send it to:

  https://www.Microsoft.com/security/portal/submission/submit.aspx

  To find out if there is a threat or not.

  I guess it's part of demand which PC seller would system.

• A .cab file that is necessary for the installation can not be trusted. Please check Cryptographic Services are enabled and the certificate file is valid. »

  OT: URGENT HELP!

  Hi, I searched ALL the DirectX solutions and yet he's just not going to download! I just want to play Gmod but I need DirectX 11. Whenever I try to download DirectX it says 'a necessary .cab file for installation can not trust. Please check Cryptographic Services are enabled and the certificate file is valid. "I have my encryption services activated, but it STILL refuses to download. -HELP-

  Hello

  I'm sure that DX11 is already a part of win 8...

  Maybe what you really need...

  DirectX Runtime June 2010, which is an optional update that needs a lot of games.

  Even my Lexmark printer requires... I'll include a link to the full installer...

  This is a package to free extraction. It will extract after double-clicking it so be sure to note the location where extracted you\it.

  Open the folder, and then double-click DXSETUP.

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• Error 404-not found? Although services are upward and the gaze of password security very well.

  Installed Enterprise Edition on the server, error 404-not found? Although services are upward and the gaze of password security very well.

  Thanks in advance,

  What URL are you trying to access?

  for em-->http://localhost:7001 / em

  to get answers-->http://localhost:9704 / Analytics

  Unless you change them.

• location on the system of audit logs on the windows system

  Hello
  
  What is the location on the System Audit logs on the windows system? I couldn't find any newspaper to < intradoc_dir > / bin directory?
  
  Thank you

  Hello

  IdcServerNT.log is the one that corresponds to audit logs of system that is defined for the AAU.

  Thank you
  Srinath

• IPhone 6 - How will I know what apps are underway in the background?

  IPhone 6 - How will I know what apps are underway in the background?

  On multitasking on your iPhone, iPad and iPod touch - Apple Support

  Scroll to the bottom where he treats background App update!

  You can visit these settings under settings > general > background App update.

• After you reset the Windows Activation within 30 days what happened then? Reset the Windows Activation again?

  Original title:
  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you
  -----

  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you

  Activate Windows.

  Once actually activate you Windows with a product key legitimate - you should be * fact *.

• App installs on Z10 when the icon &amp; Splash Screen images are added to the handle Bar

  HI - don't know if it's an unusual question, but my app not install/load on my Z10 when one or both of the pictures icon and Splash Screen are added in the descriptor of Bar.  I development mode and have an installed debugging token and it is still valid.  The strange thing is that the application will be installed on the Simulator without problem.

  If I remove the splash screen images & icon in the Bar descriptor file, the application load on my Z10 with success.

  The images are the right size: 114 x 114 px for the icon and 768 x 1280 px for the SplashScreen.  The Momentics IDE accepts two files by activating beside them.  I also tried to add the images to the Q10 & PlayBook and still no luck with this loading on my device.  I even tried to go back to the image by default for the icon, and who does more either.

  The error I get when trying to install my application on my Z10 with icon images & Splash Screen is:

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 414105
  Info: Installing com.example.ProfitCalc.testDev__ProfitCalc9866a36a...
  Info: Treatment 414105 bytes

  Someone has any ideas why this happens?

  Thank you.

  It is a known problem with certain versions of BlackBerry OS 10.1.  This article explains the problem and provide a workaround.

  Deployment of applications may crash or not after OTA 10.1 update.