what setting in adobe first elements to capture video

Similar Questions

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Studio 1735 and Adobe first Elements - error CODEC Audio IDT high definition

  Receive the error code in Adobe first Elements on my Studio 1735 trying to read the video capture.  Error is FFA-8-000 D; also says "failed to read.  The audio system does not appear to meet.  Maybe the card does not support full duplex mode.

  Any ideas or suggestions?  My sound card does not "full duplex"?  And if not, should I all options to update so it will be?

  Thank you.

  
  

• Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and feature on Eleme

  Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and function on 12 items, it has worked well. I reinstalled the 13 items that was no help. Note it is very difficult to get rid of this box, it crashes the program elements sometimes

  mnicolett4

  What operating system is involved? Assuming that Windows 7, 8 or 8.1 64-bit for now.

  There is a known No Disc error associated with the elements first 13/13.1. The Adobe fix is the removal or disabling of the OldFilm.AEX file. Let us determine if this applies to your situation.

  The file OldFilm.AEX that you remove or disable renaming in OldFIlm.AEXOLD is located in the path of 64-bit Windows 7, 8 or 8.1 of

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming in OldFilm.AEXOLD.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add on... Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project? If this isn't the case, please do.

• How to fix dialog box opens with Adobe first Elements.exe - no disk

  I bought Adobe Photoshop and first elements 13 and s/n.

  I have a desktop running Windows 7.

  I installed Photoshop and Premiere Elements as a trial and entered s / n as required.

  I can open Photoshop without problem.
  

  Whenever I try to open the first items, a dialog box opens with this info.
  

  
  

  Adobe first elements.exe - no disk

  
  There is no disk in the drive. Please insert a disc into the drive\device\harddisk1\dr1.
  Buttons-cancel, try again or continue

  
  

  I want to solve this problem.
  

  Any help is appreciated,

  William

  
  

  William

  What you describe is a known problem with the elements first 13/13.1.

  Adobe gave us the solution that seems to be deleting the OldFilm.AEX file.

  Windows 7, 8 or 8.1 64-bit

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable by renaming the file OldFilm.AEX in OldFilm.AEXOLD.

  Please let us know if it works for you, because it has for others.

  Thank you.

  RTA

• Can you wire-framing with Adobe first Elements 8?

  Can you wire-framing with Adobe first Elements 8?  If so, how?

  Thank you.

  John

  Consider

  Maintenance of the wireframe is alive in well in Premiere Pro even in first CS6

  http://creativeclouduser.com/looking-for-a-wireframe-mode-in-Premiere-Pro-try-the-transfor m button.

  When he seems to aim the preview window, encompassing, put to the scale and repositioning etc..

  Other references of first CS6 there is in this point of view, but since it is a question of Premiere Elements...

  So in this context, there should be no problem to the Premiere Elements 8.0/8.0.1 Properties Palette/Motion Panel expanded to find comparable features.

  But I'm not completely sure of what lilthea partners have envisaged for this video "long shot" recorded.

  For now, I'm promoting my interpretation of the partners "framing wire" as described in a previous post on this topic.

  RTA

• Problem installing Adobe first Elements 9

  Hello.

  I recently bought a Dell Inspiron 15R laptop special edition computer and provided a copy of Adobe first Elements 9.  However, whenever I try to use BEFORE, he asks me to choose my country.

  Normally, this wouldn't be a problem, but the country / region selector drop-down menu is completely empty and does not change when I click on it.

  Is there a way I could fix this?

  Thank you.

  It might have something to do with your DPI setting.  If you go to start > control panels > display and select the custom text size that is it also?  Please try setting to 100% and see if you continue to face the same difficulty.

• How can I apply the downloaded content from Adobe first Elements 10?

  How can I apply the downloaded content from Adobe first Elements 10? I have download all content in a file called AllContent1 (2.95 GB) file. Everytime I open Adobe first items 10, a pop-up box appears saying that "a small set of content (Flash movies, titles and menus templates themes, etc.) has been installed.» You can install all the content by inserting your DVD content or download. You want to install now? YES/NO? I have also subscribed to $49 for 20 GB of storage, which makes me a member over a year. Any help would be appreciated thank you very much.
  
  -MirzaO

  MirzaO wrote:

  How can I apply the downloaded content from Adobe first Elements 10? I have download all content in a file called AllContent1 (2.95 GB) file.

  Download a two files. A small end .exe, the other .7z, wide, fine. You must run the small .exe file and will decompress the .7z big file to the correct locations.

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• Problems of images with Adobe first Elements 9

  Hey everyone, I'm new to Adobe first Elements 9 and I really need help because I have a school project due tomorrow! My videos are filmed with the Nikon D3100 camera. I can play the clips individually without problem, but once I add effects, the video is jerky and seems to be ignored. The sound is fine, it's just the video. When I play the whole thing from the beginning, it's jerky, but like I said; If I play a clip individually, it works. BUT if I play a clip that has effects individually, it's jerky, once again. Help!

  Welcome to the forum.

  If I'm not mistaken, the Nikon uses the MJPEG CODEC. This ARTICLE will give you general information. Can you confirm that your Nikon shoots with the MJPEG CODEC?

  What project Preset you chose again project?

  When you have changed your Clips, is there a red line above them. If Yes, press enter and the red line should become green. How the images then play?

  If none of this helps, see this ARTICLEand give us as much information as possible.

  Also, how you will need to complete your project?

  Good luck

  Hunt

• Adobe first Elements 9 effects

  I have and use Adobe first Elements 9. I want to use some effects in my videos, but don't want them there throughout the course of the video. I just want what they at some time in the video. I don't know how to do this and cannot find any information about it. How can I do this?

  What you need done keyframes where you want the effect occur and where you want it to end. Rather than explain everything that I found some resources for you to check:

  http://TV.Adobe.com/watch/learn-premiere-elements-8/using-multiple-effects/

  That's the first Elements 8, but the essence is the same.

  Check also:

  http://help.Adobe.com/en_US/premiereelements/using/WS857D7FC8-809C-4EA3-AE8B-9A0A3E0D6C77. HTML

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7E 8b.html

  I know that this will not just explain, but it gives you a starting point.

• Adobe first Elements 9

  I just installed my new copy of Adobe first Elements 9 and have a question. I installed and appears to install and activate ok. I got two discs labeled 1 and 2. What is the second disc for?

  Thank you

  Disc 2 contains content, the HD and the themes, such as holidays, weddings etc. for the elements of Prime Minister.

  It is best to install everything, otherwise the program will keep and will prompt you whenever it starts.

  Place the 2 disc in your DVD drive and click Open or run which will start the installation wizard. You will see a menu of content it is goung to add to the PRE.

• Adobe first Elements 7 files main errors

  I have Adobe first Elements 7 and whenever I try to change some of my film I get significant errors. Here's what I did to try to resolve the problem:

  through some troubleshooting on adobe.com

  uninstalled and reinstalled PE7

  a system has restored several days ago, when it was working fine

  The film that I'm editing is more than an hour long and has a variety of clips video, photos, narration and music. When I press on play works well enough, but when I want to move the narrative or 'clear' a certain clip, he goes crazy! Here are some of the error boxes I've seen:

  Premiere Elements debug event

  [..-.. \Src\Sequence\TrackItemTrack.cpp-480]

  and also this

  [..-.. \Src\VideoSegment.cpp-55]

  When those who come, I can just click 'continue' and then it appears again and again until finally he says that there is an error, it should close and he will try to save the project.

  He has also developed until the file open:

  Found the default catalog. Trying to open the default catalog.

  And, when I did the system restore it came when I opened PE7:

  The license subsystem has not catastrophic. You must reinstall or call customer service.

  I have a deadline to meet with this film, but I can't even change it shut down on me so much! I tried opening other PE7 movie files and edit them and they seem to work very well from the little I did. If the file itself has something wrong with it? I had minor problems with PE7 before but nothing as bad as this! I have my video file saved on the hard drive of the computer and two separate external hard drives. I tried opening the file to all three places, but they are all the same.

  I'm not a computer expert, but if you need more info, let me know, and please answer as soon as POSSIBLE!

  Thank you!

  Well, the program can handle images of large size, up to 4096 x 4096, however, which can not handle those is your computer. Even on my NLE workstation, it does not have a lot of images pixel 4000 x 4000, and it will start to have problems.

  In addition, the resizing in PrE (or PrPro) algorithms are not nearly as good as those of Photoshop. Remember, this is a video editor, not an image processor. This ARTICLE will give you some information and some advice. So if you resize in Photoshop, you will end up with the best images and also a much lower fee General on your computer. If you work with large images, you want to look in Adobe AfterEffects, because it allocates resources and memory differently and you will edit composite to about 40,000 x 40 000 pixels. Don't remember the exact pixel x pixel boundaries.

  Good luck

  Hunt

• Adobe first elements causing 2 restart

  When I try to run Adobe first Elements 2 it causes my new A100-756 to restart, but it works very well on A110-276 my husband no idea why?

  Please check this thread on the very similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20360&MessageID=74715

  It may be useful

• Where is my serial number Adobe first Elements 9?

  Hi, I have Adobe first Elements 9 that it is installed at the point where I bought my Sony Vaio laptop. I paid for this software (and any other software that moved), however I did not number series or created on behalf of Adobe. Now my Adobe Acrobat no longer works, and he asks the use license. In addition, Adobe Elements application update and it fails all the time. Adobe does not support me and Sony does not answer my questions. Could someone help me please? Thank you very much

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  -page includes links to the programs to find a serial number installed on Mac or Windows

• Adobe first elements has stops working

  Hello, after the passage of Windows 8.1 to Windows 10, Adobe Premiere Elements installation is done successfully.

  Cannot launch Adobe Premiere Elements car controlled the following message appears and the program stops. :

  "Adobe Premiere Elements has stopped working"

  Thank you pour your possible help

  Hello and thank you pour your answers.

  In the meantime I uninstalled my anti virus bidefender

  and since Adobe first Elements 13 met tjrs after launch: "Adobe Premiere Elements has stopped working", I uninstalled Adobe first Elements 13 and after restart I reset Windows 10.

  After reset, I reinstalled Adobe first Elements 13. The lance of program

  I then reinstalled my anti virus. The program starts correctly.

  At this point I considered my request closed.