What should be the CPU temperature?

Similar Questions

• What should be the ESXi VM CPU settings on a server of type hyperthreading?

  What should be the CPU of VM VMware ESXi settings on a server of type hyperthreading?

  I have read the section of the hyper-threading http://www.VMware.com/PDF/Perf_Best_Practices_vSphere4.0.PDF .  He says:

  "Contrary to have twice more processor cores, which can
  about double performance - hyper-threading can provide anywhere from slight to significant
  increase in the performance of the system while keeping the pipeline of the most busy processor.

  He goes on to say:

  "An ESX system enabled for hyper-threading must behave almost exactly like the system without it. Logic
  processors on the same core had adjacent numbers of CPU, so CPU 0 and 1 are on the first core processors
  2 and 3 are on the second carrot and so on. »

  Logic:

  For VMware ESXi on hyper-threaded servers, what logically follows in my mind is:

  1. If a virtual machine requires the power of 2 hearts, I must specify 4 CPUs in the virtual machine settings.

  2. it is never effective not to assign any number of CPUS, which is not an even multiple of 2.  Thus, the minimum number of CPUs in the virtual machine settings must be 2.

  3 Server, in regard to the number of cores necessary to support the VMs system and planning remains the same for both hyperthreading and non-Hyperthreaded servers.  However, the hyper-threaded server deployment requires double the number of CPUS in the settings of the virtual machine to keep similar to a non-Hyperthreaded server performance and exploit the benefits of hyper-threading.

  4. when I ssh in the OS and see CPU 0, 1, 2, and 3, CPU 0 and 1 are the first kernel and CPU 2 and 3 are the second core.

  
  Question:

  This logic is correct?

  Logic:

  For VMware ESXi on hyper-threaded servers, what logically follows in my mind is:

  1. If a virtual machine requires the power of 2 hearts, I must specify 4 CPUs in the virtual machine settings.

  No, a vCPU get his plans for the base, either directly or when Hyperthreading is enabled (which makes the guest OS don't know, but ESX) via a logical processor generated by Hyperthreading. So if you want the client to use two hearts, assign two vCPU.

  2. it is never effective not to assign any number of CPUS, which is not an even multiple of 2.  Thus, the minimum number of CPUs in the virtual machine settings must be 2.

  The minimum number should be one vCPU. There is no guest without this vCPU. In fact, you should start with one vCPU when possible and increase the number when you have a good reason or really see a performance gain. This is because ESX must wait for the number of free kernels until it can plan the work of a SMP guest. So, if the client has two of vCPU he has two free cores. First, it must wait for these hearts to become free (which slows the guest) and then it occupies two hearts (which could slow down the other guests in function of the number of available cores). If Hyperthreading is enabled, ESX may plan the work faster, but always real treatment cannot be done by a physical core. For ESX 4 there are better SMP scheduling mechanisms, but these restrictions continue to apply generally. (http://communities.vmware.com/message/1692107#1692107)

  3 Server, in regard to the number of cores necessary to support the VMs system and planning remains the same for both hyperthreading and non-Hyperthreaded servers.

  Yes.

  However, the hyper-threaded server deployment requires double the number of CPUS in the settings of the virtual machine to keep similar to a non-Hyperthreaded server performance and exploit the benefits of hyper-threading.

  Lol Hyperthreading is either neutral, that it does not adversely affect the performance of the means or increase performance slightly due to faster programming (not treatment!).

  AWo

• Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

  Hello there;

  I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

  Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

  Here are the steps I get today while typing this message:

  ACPI hardware monitor
  Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

  Intel Mobile Core 2 Duo T6400 hardware monitor
  Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
  Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

  Monitor hardware ATI Mobility Radeon HD 3650
  53A temperature 0 ° C (° F 127a) (GPU Core)

  Hardware Hitachi HTS543232L9S monitor
  Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

  From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

  The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

  Thanks in advance.

  Hello

  In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
  If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

  What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

  By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

  Welcome them

• Qosmio G30-204 - the CPU temperature is high

  OK, so I have a problem of overheating with Qosmio G30-204. It seems that in the course of suspend the CPU temperature is high, I used SpeedFan to confirm this. EG + 70 degrees C after 5 minutes. 90 + degrees if left any longer!

  I find it very frustrating to say the least. This unit has served sentence. I had not yet touched in nearly two years the initial feeding has stopped working. The original power box split as it was a serious risk to my health and still less damage would could have been done to the machine! How to create a product that at least that I've updated the BIOS Toshiba fry the GPU!

  Needless to say that I did pretty well as soon as I got the camera. What can be done to fix this problem? If anything like that? It makes me not want / trust buy another Toshiba product.

  I can't wait to hear support ;)

  Hey,.

  In your case I don't he say s a nuisance Toshiba. It can be another problem as Akuma written and this means that it has nothing to do with Toshiba.

  For me it s definitely dust in the heat sink, especially if you do not clean your laptop before. You must use the jet of compressed air to blow the dust from the cooling fans. It only takes 5 minutes and should be made from time to time because it s normal behavior which, after a certain time dust, blocking the cooling fan.

  Check this box!

• Satellite L850-046 - question about the CPU temperature

  Hi Experts,

  I bought the Toshiba laptop 9 months ago, but now notice the temperature warms. I check the software Toshiba Health Monitor and the CPU temperature range of 46 to 53%, fan speed 50%-63%.

  Is - this normal readings?

  I am now using a desk fan pointing in the vents hoping that additional traffic can maintain better temperatures.

  What would be the ideal and the overheating of the readings to look out for.

  Thank you very much

  Because cell phone use for 9 months, I recommend you to clean the cooling fans.
  The fact is that from time to time the dust and debris that may affect the performance of the cooling fans, and this could lead to a higher temperature.

  I clean my fans from time to time using a jet of compressed air.
  It helps to get rid of dust and to lower the temperature.

• What should be the ideal size of SGA components?

  Hi master,
  
  We are using oracle 10G R2 on RHEL 4.7, I would like to know what should be the ideal size for components of the SGA, if my database size is 30 to 70 GB?
  
  We need to set manually? or if we fix SGA_TARGET then it's OK?
  
  Once again how much % should we specify SGA_TARGET if we * 8 Server CPU * with * 8 GB * of RAM?
  
  and of course the database size will increase in function close...
  
  
  
  
  
  
  
  
  any suggestion for it
  
  
  
  
  
  Thank you and best regards
  
  
  VD

  If you want to manually set the values for pools, then his new return to the same answer that is trial and error.

  For a well-written application (one that uses bind variables and has a minimal amount of literal SQL), a division of 40-60 of SGA should be well that is in the shared pool and other components 40-60% for the buffer cache, but I must add, YMMV.

• Satellite M100 - I can't analyze the CPU temperature

  I am a Toshiba Satellite M100 series owner (Core Duo T2300, X 1400, etc.). The problem is that I can't analyze the CPU temperature variations in such popular application such as Everest or Notebook Hardware Control. Also any other software provided by Toshiba and installed already on my HARD drive does not include some CPU diagnostics, including temperature changes!

  The only software that seems to work is the HWiNFO32 so there is a thermal probe inside which specifies that Centrino Duo processor temperature, but this software is not very user-friendly :(

  There is a request for Toshiba do something with this... I've updated the BIOS in my template for a version 1.70, but this does not change I could easily noticed (or is he?)  :(

  Hello

  In most cases applications can give you info on the hardware and the different settings but the temperature of the CPU in most cases is not visible. Toshiba has no tool or utility that can read or modify.

  BIOS update has absolutely no influence on it. Satellite M100 is one of the latest devices and I really don t understand why it is so important to you. Important in my opinion is the stability of the system, the operation of the equipment and no problem with the software you are using. Am I wrong?

• What can replace the cpu T7200 to the Mac Mini 2.1 end of 2007?

  What can replace the cpu T7200 to the Mac Mini 2.1 end of 2007?

  http://www.iFixit.com/Guide/installing-Mac-mini-model-A1176-core-2-Duo-processor/1178/1

  Expandable up to an Intel Core 2 Duo 2.33 GHz T7600.

• Satellite L40 - question about the CPU temperature

  Hello

  I have a Toshiba Satellite L40 17 Q with Intel Celeron M CPU.

  The usual device temperature is about 60 degrees Celsius. I read that the Tj to this type of processors is 100 degrees Celsius.

  So my question is dedicated to the owners of laptops equipped with Intel Celeron M processors and of course for the hardware gurus.
  Is the operative temperature of 60 degrees Celsius of normal, and if not how do I decrease.
  My laptop is new and I make sure that the air flow openings are not jammed.

  Thank you in advance!

  Hello

  Don't worry, the CPU temperature. 60 degrees Celsius is certainly within the normal range, and there is no reason to worry about this. On my laptop Tecra, I noticed the temperature CPU about 62 degrees Celsius and drive HARD around 40 degrees Celsius.

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• Windows media player cannot read the particular mp3 file while other mp3 file can. What should b the reason?

  Windows media player, it is impossible to read the downloaded particular Internet as mp3 file ' save link as. / target as ' while some other mp3 file can b played. What should b the reason?

  Hi Manjit L,.

  I see that you are unable to read a particular mp3 file in windows media player. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. do you get an error message trying to read that particular file in media player?

  I suggest you to refer to this article and check if that helps.

  Windows Media Player Invalid File Format Error Message: http://support.microsoft.com/kb/234019

  Refer.

  Windows Media Player: http://windows.microsoft.com/en-US/windows/media-player-help#media-player-help=windows-7&v2h=win7tab1&v4h=winxptab1

  I hope this helps.

• What should be the perfect setting to convert the VM model CLI?

  Hello team,

  I tried to convert the model of a virtual machine using the vim - cmd vmsvc/convert.toTemplate 1

  
  

  And I am facing this error:

  
  

  {(vmodl.fault.NotSupported)

  faultCause = (vmodl. NULL in MethodFault),

  MSG = "received error [< p:1f2aea80, TCP:localhost:80 cs >] SOAP response: markAsTemplate.

  The mode is not supported on the object. »

  }

  
  Therefore, it is supported in ESXi 6.0? If so, then what should be the correct configuration?

  Thank you

  Christophe

  You need a vCenter server used with models... vCenter can then be managed using PowerCLI.

  / Rubeck

• Hello, I would like to know what the ideal audio levels (gain/normalize) levels should be for my project. It will be broadcast on television. I think that the gain should be set to-12? But I'm not sure what should be the vertices. Thank you!

  Hello, I would like to know what the ideal audio levels (gain/normalize) levels should be for my project. It will be broadcast on television. I think that the gain should be set to-12? But I'm not sure what should be the vertices. Thank you!

  And look also at: Conform to broadcast standards, volume limits. Adobe Audition CC tutorials

• What should be the shape of the model?

  What should be the shape of the model?
  
  Object library; who has inherited triggers commonly used?
  
  and?
  
  
  Kind regards
  
  Abdetu...

  If you look at the shape of the library of standard objects (OFGWEBOL.fmb), you will see that there is no code (with the exception of a few units of program). The OL is really meant to look kind of stuff.
  In addition, it is much easier to maintain code in a library of pll.

• What should be the address of the cluster in soa suite 11 g

  What should be the address of cluster if I managed server1 on a box and managed server 2 on the other urgent box.please let me know

  IF you have 2 servers managed on two boxes

  the cluster address would be

  hostnameoffirstmanagedserver:portofms1, hostnameoffsecondmanagedserver:portofms2

  It would work