What size Minimum of USB drives?

Similar Questions

• Envy DV7: What size/form factor hard drive is in my laptop?

  Good evening.

  Well, my desire for two year, died the other day care of overheating the chronic problems that seem struck Envys at this time. My block of cooling died beforehand, that was probably the cause of the rise in temperature. Yep, that burning smell of rubber from the exhaust vents was kind of present that something was wrong, as well as the characters of ding strange wing that the display has been put in place and the intense heat of the keyboard who suddenly developed. Unfortunately, it was out of warranty. I really liked this PC, too.

  In any case, I would remove the hard disk that is inside to retrieve the data using an external hard drive enclosure but I need to know what size or form factor of the hard drive is to buy the appropriate forum. I guess it's a 2.5-inch form factor. Is this correct?

  Thank you very much

  Bob

  Yes, it is 2.5 inches. You can just buy SATA TO USB adapter:

  http://m.eBay.com/ITM/Anker-USB-3-0-to-SATA-3ft-converter-adapter-cable-for-2-5-3-5-inch-HDD-and-SSD-/221203585457

  Concerning

  Visruth

• If you use SSD what size minimum, you can use I'll just install the softwar winds 7 operation and put all the other programs on a hard drive Sata is the way it should be done?

  I'm building a new PC, I have the motherboard and it has a location for an SSD, this who has the ability of minium are? and if this store just drive the sofware opererating only, as I intend to have all my programs and data on a SATA hard drive is the way to corect to go? Could someone ' a please advise please.

  The minimum I recommend is 80 GB, if you can go for 128 GB to 160 GB, I would go for it.

  Windows 7 uses 10 GB of disk space, and you have to take into account future, Service Packs and updates.

  You must also consider your page file size that will depend on the amount of RAM you have installed.

  Other disk space requirements include your programs and hardware drivers.

  The benefits of having an SSD is to accelerate the performance of the operating system and applications. In order to have a just installed SSD for upgrading the operating system on a mechanical HDD as well as your programs wouldn't make sense. Store content or data that you create on the HARD disk.

• HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

  I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of recovery like 17 concerts.   Is there a way to check the requirements for the front to accept the HP one time recovery option.  I have a new 16 GB USB key and wanted to make sure that it is large enough.

  Also do a backup image to DVD?   If so, how many DVDs?   The laptop is new and I added only Chrome and some minor programs.  My data files are always on an external hard drive.

  Hello

  Thanks for posting in the Forum from HP Support.

  To be honest, I don't know what size will be that these recovery files are because they can vary from the version of Windows to another. They can vary from a model.

  In my opinion, 16 GB is probably not enough.

  DVDs are usually 6 (6x4.7 GB = about 28 GB) but this can vary from one model.

  This possibility of imbedding maybe once, there are other ways that you can save your system indefinitely.

  This is a free option included in all windows (creating system image, it's free as included in Vista from the outset).

  http://support.HP.com/us-en/document/c03544793

  However, this option requires (e.g. USB HDD) external HARD disk or DVD. It does not work with USB flash drives.

• Pavilion 15 laptop: Recovery USB drive: size adequate, can it be calculated from used space

  Hello

  I have a workbook (new), and the system has just updated to W10 threshold release 2. I had the laptop with a 1 TB drive. Is there a report/calculation of compression that can tell me if I have so much disk space used = size of the flash drive to buy?

  I want to buy a decent flash player, there is a quite a price difference between 16/32/64 GB.

  Thank you

  When you start the HP Recovery Media Creator, he will tell you what storage capacity must have the USB flash drive.

  It will be a requirement of storage 16 GB or 32.

• Satellite U500 - what size can be a new HARD drive?

  Hello

  I have the Satellite U500 series
  I would like to improve my ability to drive, what is the maximum I can do and where... ?

  Concerning
  Sagar

  Hello

  With the help of the search function of the forum you will find this answer ;)
  The controller SATA HDD from the laptop support.
  SATA controllers are not confined to a specific size of the HARD drive. So, theoretically, you can use any HARD drive 2.5 SATA.

  Welcome them

• Portege 7100 - what size HARD drive it does support?

  Hello

  my old man (I'm a student, so no money for a new) Portege 7100 (ct) has a small hard drive, so I want to shift to a bigger... but what size HARD drive supports the 7100ct? (and that's a 1.8 "or can I use drives 2.5"?)

  thx for any help...

  Hello

  As far as I know that your unit has standard 2.5 "hard drive. Unfortunately there is no public record of such information. Accurate information, you can get that from accredited service partner or even some HARD drive supplier.
  In my opinion, your device must be able to manage with maximum up to 8 or 10 GB HARD drive. For me, we know that some offering it can manipulate the BIOS with special tools and after that BIOS recognize a much larger capacity HARD drive.

  Try to pick up some information on the net service partner or call your country. I believe that consultation service is free.

  Good bye

• A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of ram.  Any suggestions on what would be a reasonable price?

  A friend offered to sell me his MacBook.  It was new in 2010 or 2011.  I'm not sure of the size of the hard drive is, but it has 16 MB of RAM.  Any suggestions on what would be a reasonable price?

  This isn't a topic appropriate for the forums. We only used the material price. Visit eBay to find this information.

• Qosmio G10-100: HARD drive failed - what size of HARD drive I need to purchase?

  My hard drive failed after 4 years reliable. HD of what size should I buy? (2.5 "or 3.5")

  All other things to consider when buying a laptop compatibility internal HD?

  Thank you!

  Ben.

  Gardman is right there are 2.5 "HDD with IDE (ATA-5) interface.

• Equium L40 - 17 M: what size drive HARD maximum can I use?

  I was wondering if anyone knows the maximum size of the hard drive I can install it, and what should I look for when you buy one?

  Thank you very much

  Hello

  I think that the L40 supports disk HARD 2.5 SATA and he s not what size HARD drive is important.
  The laptop must manage each 2.5 SATA HDD.
  500 GB 2.5 HDD is currently the largest on the market, but in the next time you will find the 2.5 SATA HDD that supports 1 TB (1000 GB).

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• PowerEdge 2900 - size USB drive external Maximum

  Hello

  I inherited the responsibility for a Poweredge 2900 server last year. Recently, asked me to mount a NTFS 5 TB external USB drive.

  This failed with the following message is displayed:

  $ mount/mnt/external_usb_3
  Cannot read the last sector (1220940596): invalid argument
  TIPS: The volume is a RAID/LDM, but it was not yet, the installer
  or it was not setup correctly (for example by not using not not mdadm - build...).
  or a bad device tries to be mounted,
  or the partition table is corrupt (partition is smaller than NTFS).
  or the NTFS boot sector is corrupt (size NTFS is not valid).
  Failed to mount ' / dev/sdf1 ': invalid argument
  The device "/ dev/sdf1 ' is not a valid NTFS partition.
  Maybe you selected the wrong device? Or the entire disk instead of one
  partition (/ dev/hda, not/dev/hda1)? Or vice versa?

  I know the Poweredge 2900 has a limit of drive HARD internal 2 TB because of the PERC5 / i controller. Is this also true for external USB drives? Or is this another limitation HW or OS? I was reading the documentation and found no (or too looked) the answer.

  Is it possible to mount a drive of this size of form/repartitioning fitness?

  Thank you

  Brendan

  I don't think that USB would have this type of prescription, unless there was a problem of driver forbidding him. Material, I would say 'no '.

• Help move my datastore on external USB drive to reformat with correct block size

  Hello

  I use a Dell PowerEdge 2650 with a 550 GB disks configured in RAID 5 with ESX 3.5i

  When I installed ESX I didn't pay attention to the size of the block. This is the default 1 MB and so I reached the maximum extends. Which means that I can receive only 260 GB on my 550 GB.

  I need to change the parameter to a block size of 4 MB in order to access the entire table.

  But for this I need to move my existing data store that contains a lot of important files for me.

  I have not any currenty server with 260/300 GB of free space.

  I'll try the following:

  1. connect an external USB drive. I have ssh running, but I'm having difficulties to climb. I looked for info, but I am always sick.

  2. If possible, I would like to compress using gzip great records in my data store before moving. Can advise you on the location of the files in the system and if it is possible to do?

  Thank you

  Chris

  It is clear now,

  in this case if your VM's you buy a big enough hard drive 250 GB single VMDK file to copy all virtual machine configuration, not he zip or compress, you can screw all of the data on disk

  I have an idea, depends on the amount of data you have on your virtual hard disk, you can use VMware converter 4.0.1 and clone your VM with discs thin provision, Vmware converter will be "zipp" your VMDK file to the exact size of your data without any risk that would have lost you all your data.

  1 use vmware converter to clone your VM with discs thin provisioned

  2. low source VM

  3. start the VM 'new' and check if it works well

  4. If 4 is OK, stop VM 'nine '.

  5. copy the new virtual machine on your USB key (set the USB you your workstation and you winscp to copy the virtual machine)

  6 remove VMFS datastore

  7. create the new VMFS datastore

  8 download VM to the new data store

  9. creating the new virtual machine based on a VMDK file

  10. start the virtual machine

  see you soon

  Visit my blog

  www.vmwaremine.com

  If my answer is useful, click on some stars

• Satellite Pro 4280 - what is the size of the HARD drive?

  I just bought a laptop Toshiba Satellite Pro 4280. According to the manual, it should have a 6.0 GB HDD but in my computer it is shown as having only a 1.34 GB capacity.

  PS I formatted the disk to remove the former owner data and operating system and you have installed Windows 98SE

  [Edited by: admin]

  Hello

  Satellite Pro 428Xcdt was certainly delivered with 6 GB HARD drive.
  Are you sure that you have checked the size of the HARD drive correctly?

  I guess the 1.34 GB is a free space on the HARD disk.