Short keyboard and windows log

Similar Questions

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Pavilion 6543tx: keyboard and the touchpad works do not after windows 7

  Hello.. I have upgraded to windows 10 days back. But as the cursor froze a lot, I switched to windows 7 today. Now the situation is worse. The touchpad or the keyboard does not work. I tried to connect the keyboard and mouse external, but also those who did not. I am able to connect to windows through fingerpass, but unable to do anything. Please help as soon as POSSIBLE. Thank you!

  HI @Milind_Thakur,

  Thank you for your inquiry.

  I understand that you upgraded to Windows 10, but due to a problem with the cursor freezing frequently, you returned back to Windows 7. Now the touchpad or keyboard to respond. Connect a keyboard and an external mouse also did not work. You are able to log into Windows with your fingerprint, but are still unable to access anything whatsoever.

  I'll try to make a recovery to factory.   Computers HP - performing a recovery of HP (Windows 7) system. If you can not access the Recovery Manager, you will need a recovery media.  If you have not created your recovery discs, please contact HP support to obtain a recovery kit. Please contact HP to Contact HP Supportassistance. If SD not do you a backup before this all started, you will have an option during the recovery to do.  If you need it, here is a link to the computers HP - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

  Please let me know the results.

  Thanks if it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' for my effort help, click on the "Twww.Mountainview.rsb.qc.ca Up" " " give me a Kudos.: catvery-happy. "

• Keyboard and mouse do not respond during installation of Windows 7.

  navigation when installing win 7 without the keyboard and mouse

  I installed Windows 7 Home Premium on a new computer with P67 Pro3 motherboard and storage of 128SSD. I don't have the use of the mouse, although the keyboard works. (Good work). This is my first time building my own computer.

  I stood for "I accept...". "in the box before you click"next ".

  The clicking on 'enter' had worked up to this time to move the process forward. Now 'Enter' does not work, I tried a certain 'shortcuts without result. For me to accept the conditions to continue the installation. I checked the "keyboard Short cuts for windows, but I have not found one to solve my problem." There is no cursor on the screen.

  I'll be grateful for any help.

  E-mail address is removed from the privacy *.

  What is a wired or wireless keyboard?

  If it's a USB keyboard, have you tried other USB ports on the system?

  Also, try to boot into your BIOS and change the USB mode to legacy and see if the keyboard resumes.

• BootCamp + Windows 8.1 and Windows 10: trackpad and keyboard bluetooth always unsuccessful pairing

  My computer is a model of end 2011 of 13-inch MacBook Pro. I use an external 27 "monitor and bluetooth trackpad and keyboard. Until the last week of July, 2016 that I used with Windows 8 with BootCamp 5, nicely. Then I got a message that Windows 8 would be not updated for critical and security updates. I decided to upgrade to 8.1 Windows but the trackpad wireless works intermittently, and the wireless keyboard is not working at all. I get a message to pair, but the pairing is always unsuccessful. Then I upgraded to Windows 10 and the same problems with wireless keyboard and trackpad.

  Does anyone have a solution? Thank you

  You can try this. UN-pair external Apple Trackpad and keyboard on the side OSX, pair it with test first, and then pair on the side Windows OSX.

• No keyboard, no blocked on Windows 8 and Windows 8 boot disk does not start

  I have a 15 inch Macbook Pro mid 2013 (I think, I can check if it helps). There are 2 days that the SPACEBAR on my keyboard broke. I hear there as soon as I turn on my laptop it is still active as if I am pressing on it and as soon as I get to type anything, by pressing any other key on the keyboard, the EEG SPACEBAR take off and won't work at all. From what I could tell, it's an electrical problem with the contacts on the keyboard and after going a TI repair shop, they said that the only solution is to change the keyboard altogether. In the meantime, I bought a USB keyboard.

  I am also under Windows 8 in Bootcamp and I left it usually automatically connect to OS X and I just use the Alt key at startup when I go into Windows. However I have noticed that since the space bar is stuck and active at startup, I can no longer press Alt to change Windows, I decided to change the automatic boot from OS X to Windows disk and restart thinking I could just repeat the process when I am done going back to OS X. But for some reason unknown, Windows 8 will not start, just of takes me to the windows icon and freezes. Sometimes a message saying "Prepare the automatic repair" will appear under the icon of windows, but it is still frozen. Now I'm stuck in this boot sequence and I can't switch back to OS X since the Alt key will not work.

  Now my questions are: is there a way to switch partitions in the boot without a keyboard? Or is there a way to cut completely from the Mac keyboard and use the USB, one instead? Or even a way to break the contact of the space completely bar so stop because I change the keyboard completely in any case and it would be just a temporary solution? Thanks for any info!

  If the battery on your Mac has inflated because of charge cycles, it can push against the keyboard, causing its functioning. Have you checked the battery to abnormal expansion?

• Satellite L300 - no response keyboard and mouse after Windows 7 upgrade

  Hi all

  After a new Windows 7 Ultimate installed on my PSLB0E L300, I lost the use of the keyboard and mouse pads.

  I did the installation with a usb mouse, who also now works. I downloaded all the drivers connected to my machine using the virtual keyboard, rebooted after each installed drivre, still does not.
  I also updated the BIOS, 1.3-1.5, still does not

  The strange part is that I can't access BIOS with F2, or sequence of starting using F12 at startup, navigate through the BIOS, so the keyboard works, but no longer works when Windows 7 has started.

  I tried to put all the defaults in the BIOS, no change.

  Help! >.< going="" crazy="" over="">

  Hello

  Have you installed additional drivers or tools for these external devices? If so you should remove, just check the software list in Control Panel.

  Normally the touchpad can be turned on/off with the FN + F9 key combination.

  In addition, it would be interesting to know what is happening on the factory settings. I mean the operating system preinstalled by Toshiba.

• I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost

  original title: lost document

  I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost! Any suggestions? A system restore wouldn't work?

  If you have not saved the document before the reboot - and Windows always give a lot of warning before restarting automatically - while the file disappeared.  There is no way to recover; System Restore does apply to system files, not data.

• Windows XP screensaver no longer works after insalling wireless keyboard and mouse (2000)

  Original title: eve of screen Windows XP stopped working

  I just installed a Microsoft wireless keyboard and mouse (2000) and now my screensaver lights.

  Checked the setting in Control Panel and all looks good.

  Hi Rich 664,

  · What is the service pack installed on the computer?

  Check out the link that mentions on the same question below: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

  With regard to:

  Samhrutha G S - Microsoft technical support.

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• I just bought the wireless desktop 800 Windows keyboard and mouse it does not work on the Windows XP desktop

  I just bought the wireless desktop 800 Windows keyboard and mouse. It works fine on my Win7 laptop but not on my XP desktop even if it says it is compatible with XP. Any advice?

  Hello

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  You cannot use the Wireless Desktop 800 keyboard and mouse.

  The problem may occur if the devices are not detected.

  What exactly happens when you try to use the devices?

  A fixit could be used if the devices are not detected.

  See the site:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I am running windows XP and leaned a book against the keyboard and the screen rotates 90 degrees.

  I am running windows XP and I bent down a book on the edge of the keyboard and somd combo of keys to touch at the same time shifted my moniter 90 degrees and now I can, t get the screen back to normal.

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  According to the graphics card on your computer, these can be alternatives.
   
  Right click on the desktop | Graphics options | Rotation.
   
  Right click on the desktop | Screen resolution | Orientation.
   

• keyboard and mouse not working not properly after installing Windows 8.1

  I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the system is restarted. Numbers on the keyboard stopped typing and letters were capitalized when the caps lock was turned off and the numbers at the top will only type the symbol above the numbers.

  I looked at this problem and it seems that I have to enter in the settings of the UEFI and disable the Intel XHCI mode. When I enter the settings of UEFI, I can't make any selection in the start menu. My keyboard and mouse stop working.

  Any suggestions?

  Thanks for posting a reply. Fortunately, I didn't have to try your solution because the computer solve itself.

• Windows xp blue tooth detects the keyboard and the mouse, but immediately removes both

  Just installed windows xp and having trouble with the blu-tooth now the keyboard and mouse

  Hi Bruce,.

  1. What is the brand and model of your keyboard and bluetooth mouse?

  2. What Service Pack is installed on your computer?

  If you have Service Pack 2 installed on your computer, I suggest you to follow the steps from the link and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

• message "Windows cannot find your profile stored locally and is logging in with a temporary profile". What should I do?

  The screen message, "" Windows can't find your locally stored profile and is logging in with a temporary profile".  What should I do?

  Hello

  Try the troubleshooting provided in the link below steps to fix the problem.

  Error message: "Windows cannot load the locally stored profile".

  http://support.Microsoft.com/kb/812339