What start verifying DMI Pool Data of average failure (ATAPI) CD-Rom
What does it mean? Audit (DMI) pool data Boot of average failure (ATAPI) CD-Rom
Hi LarryR75248,
· Exactly when you receive this error message?
· What operating system is installed on your computer?
· You did changes to the computer before the show?
This problem may be caused by one of the below mentioned reasons:
i. corrupt boot on the computer files.
II. for hard disk parameters are not correct.
III. floppy drive or a CD in the computer where the problem.
IV. Boot devices not set correctly.
c. connections loose or disconnected.
VI. bad hard drive or other defective hardware
Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.
NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
See the following article for more information on the issue:
"Verifying DMI Pool Data" error message and the computer is not available
http://support.Microsoft.com/kb/287553
Note: Article applies to Microsoft Windows 95 & 98. It's just for more information on the issue, that you face.
Let us know if this information useful.
Tags: Windows
Similar Questions
-
Install Windows 7 stuck on screen 'Verifying DMI pool data'
Hello
so I installed windows 7 on my aspire m1110 (Cpu: AMD Athlon 64 x 2 4800 + Ram: 3 GB video card: ATI Radeon HD 3450 1526 MB) and the final rebot, the computer is stuck in the screen "Verifying DMI pool data". Then after an hour or two, I forced the computer to shutdown (clicked the power button) and after it the pc just does not start. NOTHING. I click the power button and does not appear any image. I can't boot from the cd or dvd... I can't do anything. Could someone help? I'm tired of Windows vista because it's so slow and I really want to Windows 7. Meanwhile, I solved and back to windows vista, but I don't want that. My computer is not compatible with windows 7?
OK, first you install windows 7, it goes through all the steps and installs and then when is it recharges and gets stuck on VERIFIANT DMI, shut down the computer and boot from the cd again once, when it loads and goes to the screen when you press INSTALL WINDOWS on this screen, it is also a windows repair option press that and don't select auto repair. go to the command prompt
-
Computer stuck on Verifying DMI Pool Data data
try to start on an old IDE HDD and blocked on the verification of dmi pool data each time. BIOS recognizes both the hard drive and the optical drive. can boot from CD and I tried chkdsk running, including fixmbr and fixboot, which did not help. also changed a lot of settings in the bios, trying to find one that works as a "Fail-Safe by default" and "optimal by default". not sure where to go from here or try some of them again, maybe I've done something in the right order?
Thanks in advance for the helpEdit: as a side note, one of my anti-virus just detected a virus before the computer as forced a reboot out of my control. It would not start again under windows because of this errorHi ChristopherJohnston,
First check and make sure that all physical connections on the computer are correct.
I suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.
Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
-
Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?
Hi JohnHorky,
Step 1:
First check and make sure that all physical connections on the computer are correct.
Step 2:
Alternatively, you can try to run a Checkdisk and check.
a. Insert the installation disc.
b. restart your computer.
c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.
d. choose your language settings, and then click Next.
e. in the System Recovery Options menu, click command prompt
f. at a command prompt, type the following command and press ENTER
Chkdsk /f /r X: (drive letter)
Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.
g. press y when you are prompted to check the drive the next time the system restarts.
h. close all applications and restart the computer.
Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.
Step 3:
Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.
I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.
Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Hope this information is useful.
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
Original title: titans of the game of chess,.
Chess Titans did not start cannot find 3d... devices also office 2013 do not install (error 1920. The service "Windows Font Cache" (FontCache) has no start.verify you have sufficient privileges.
I have the following in the Event Viewer error logLog name: ApplicationSource: Application errorDate: 14/07/2013-10:15:34Event ID: 1000Task category: (100)Level: errorKeywords: ClassicUser: n/aComputer: darkpheonix-PCDescription:Name of the failing application: chess.exe, version: 6.1.7600.16385, time stamp: 0x4a5bca09The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000Exception code: 0xc0000005Offset: 0x000007fef9ca0004ID of the process failed: 0x1c24Start time of application vulnerabilities: 0x01ce804cf85d03a4The failing application path: C:\Program Files\Microsoft Games\chess\chess.exePath of the failing module: unknownReport ID: 37e9d6e6-ec40-11e2-8c42-f0def1a3fe7eThe event XML:1000 2 100 0 x 80000000000000 8266 Application darkpheonix-PC Chess.exe6.1.7600.163854a5bca09unknown0.0.0.000000000c0000005000007fef9ca00041 c 2401ce804cf85d03a4C:\Program Files\Microsoft Games\chess\chess.exeunknown37e9d6e6-ec40-11E2-8c42-f0def1a3fe7eHi Sreevasthava
I suggest you perform the upgrade in-Place on Windows 7, this would help you to solve the problem without losing any data or application.
How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2.
http://support.Microsoft.com/kb/2255099
Note: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.
I hope this helps.
-
Calculate dates starting at a specific date intervals
I need to write a generic inPL/SQL logic to derive a period (frequency is either monthly/quarterly/annual/semi-annual) starting at a given date.
But Feb I requires separate treatment in the business date falling on 30, months with 31 days and in the case of date falling on 31 months with 30 days.
I tried several ways but because he can't find a way to answer a few cases, when the date is 29/30/31 without coding in hard dates per month.
I expect for such cases is the following:
For example
Particular day = 29 a month (for example, starting with Jan - 13)
Monthly
January 29, 2013 <>- 27 February 13
February 28, 2013 <>- 28 March 13
29 March 2013 <>- April 28, 13
29 April 2013 <>- may 28, 13
May 29, 2013 <>- 28 June 13
June 29, 2013 <>- 28 July 13
July 29, 2013 <>- 28 Aug 13
August 29, 2013 <>- 13-SEP-28
29 SEP-2013 <>- 28 October 13
29 October 2013 <>- 28 November 13
November 29, 2013 <>- 28 December 13
29 December 2013 <>- 28 January 14
Quarterly publication
JANUARY 29, 2013 - 28-APR-13
29 APRIL 2013 - 28-JUL-13
JULY 29, 2013 - 28-OCT-13
OCTOBER 29, 2013 - 28-JAN-14
Semi-annually
JANUARY 29, 2013 - 28-JUL-13
JULY 29, 2013 - 28-JAN-14
For example
Particular day = 30 a month (for example, starting with Jan - 13)
Period should be as follows:
Monthly
January 30, 2013 <>- February 28, 13
February 28, 2013 <>- 29 March 13
March 30, 2013 <>- 29 April 13
April 30, 2013 <>- may 29, 13
30 may 2013 <>- 29 June 13
June 30, 2013 <>- 29 July 13
July 30, 2013 <>- 29 Aug 13
August 30, 2013 <>- 13-SEP-29
30 SEP-2013 <>- October 29, 13
October 30, 2013 <>- 29 November 13
November 30, 2013 <>- 29 December 13
December 30, 2013 <>- 29 January 14
Quarterly publication
January 30, 2013 <>- 29 April 13
April 30, 2013 <>- 29 July 13
July 30, 2013 <>- October 29, 13
October 30, 2013 <>- 29 January 14
Semi-annually
January 30, 2013 <>- 29 July 13
July 30, 2013 <>- 29 January 14
Also, the code must meet the case of leap year so.
The problem here is my entry for this routine code is ' Date from ' who will be progressive i.e. to date ' + 1 from the last period (initially it will come from the value stored in DB) and the output should be "to this day".
Can you guys please provide some suggestions.
Thank you.
Hello
Sorry, we don't know exactly what you want. If you can say what you want in English, then someone can help you code it in SQL.
As Pleiadan has said, of course looks like a job for the ADD_MONTHS function. Maybe something like this:
WITH the settings THAT
(
SELECT DATE '' 2014-01-30 AS start_date
1 AS months_per_period
OF the double
)
SELECT ADD_MONTHS (start_date, months_per_period * (LEVEL - 1)) AS period_start
, ADD_MONTHS (start_date, months_per_period * LEVEL)-1 AS period_end
OF parameters
CONNECT BY LEVEL<= 12="">=>
;
Output:
PERIOD_STAR PERIOD_END
----------- -----------
January 30, 2014 February 27, 2014
February 28, 2014 29 March 2014
March 30, 2014 April 29, 2014
April 30, 2014 29 may 2014
May 30, 2014 June 29, 2014
30 June 2014 July 29, 2014
July 30, 2014 29 August 2014
August 30, 2014 29-Sep-2014
30 - Sep - 2014 29 October 2014
October 30, 2014 29 November 2014
30 November 2014 29 December 2014
December 30, 2014 29 January 2015
-
What does the letter 'e' in the average square in my music?
What does the letter 'e' in the average square in my music?
Explicit
-
Photoshop needs an internet connection after 30 or 99 days. What is the transfer of data for this connection? I ask, because I'm going to work on a ship for a long time and ROAMING costs are very expensive. Maybe it's possible via a mobile phone connection?
[Left non-technical Forum Lounge for cloud... forum] MOD]
This is an open forum, not Adobe support... Click below to contact Adobe staff for help
While the forums are open 24/7 you can't contact Adobe support at any time
Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?
In addition, all the menus to stay for a while and then disappear. I have to be fast to all operations, including by opening a file, apply an effect or export a file.
Images:
Jonathan,
I'm afraid that you are locked into the GPU problem, described by butz in post #13 here:
-
What is a node in a cluster average?
I looked around, but I want the simplest def, what is a node in a cluster average.
Node = vm?
Please comment.
Thank you
If a cluster own hosts and I can manage multiple clusters using a vCenter Instance right?
I made a correction to your question and the answer is Yes.
-
What will happen to the data if we remove a disc in ASM
Friends-
Question: Under RAC environment we use ASM for storage. I want to know what will happen to the data if we remove a disc?
Please advise on this.
Concerning
VSHYou are welcome. If the answer to this question, please mark the thread as closed and give points where won. Thank you
-
Start CalcScript befor, loading data
How can I start CalcScript befor load data?
I want clear slice in cube befor load data.
Example:
I export the data with the period Jan, Feb, so I have to erase data Essbase cube only fo period Jan, Feb. In the case when I export data for the period from March, I want to erase data with period Mar.
I don't want to use maxl because in a maxl script I have to specify the user name and password.
Thank you very much.
--
GeloHello
The best way is to duplicate the KM - 'IKM SQL for Hyperion Essbase (DATA)'
Modify the command 'Load data into essbase' kmUpdate
SQL = "" "select <%=od...
".to
sql = ""
now you can create an interface, the value staging as 'Table SUNOPSIS MEMORY ENGINE' and multi-line, data store loading essbase to the target, the value of KM that you just updated. "." < br / > then use calc script options, in order to have an interface that doesn't have a source and can run scripts Calc.
Ok? FIX :)
Cheers
John < br / > http://john-goodwin.blogspot.com/
-
What is the source of data 11.1.2?
Hello
What is the source of data 11.1.2? without the help of ODBC drivers how to connect to the back-end database. I need the flow for that.
Thank you
PCHello
I answered a similar question here > what is the data source 9.3.1? Is OLEDB supports ODBC
If you didn't even answer or bother to mark it.Data source connections are driven by JDBC to communicate with the repository database and a JAVA API to communicate with essbase.
Ok?
See you soon
John
http://John-Goodwin.blogspot.com/ -
What is the source of data 9.3.1? Is OLEDB supports ODBC
Please someone make me know
What is the source of data hyperion 9.3.1
and is OLE DB takes ODBC support
In hyperion 11 the data source is through ODBC.
Thank youHello
The data source in 9.3 / 11 is stored in the tables of planning system database
In 9.3 it is implemented through the configuration utility, in 11 it's done directly through planning web.The data source may contain connection details standards of planning and essbase application.
The data source connects to the repository planning through JDBC and essbase using a JAVA API.Ok?
See you soon
John
http://John-Goodwin.blogspot.com/
Maybe you are looking for
-
Firefox closes after a short period of Motorola Droid Razr M (XT907)
I noticed that my phone is not on the list of supported devices. When it will be supported? Is there a reason why he has not supported? During the short period he does not like him better than Chrome or dolphins for Android.Since he is not taken in c
-
Is there currently a system with LiveMeeting and audio computer problem?
Use us all the time, but are not currently able to use this function. Has something changed that we have? You can test the sound but are disconnected almost immediately.
-
How do I know which programs to take off the windows Installer CleanUp list?
Windows Installer Cleanup of * original title - how do I know which programs to take off the windows Installer CleanUp list? I don't want to uninstall or remove a program that I always use currently__ *.
-
Any new on this forum. I tried for a long time to move some applications from the internal memory to the 32 GB SD card on my Tablet A200. Do not have the same tools as my smart phone. Can anone help? attempts to free some memory. Very frustrated. Ker
-
Printers HP 6520: 6520 cartridge door lock
Print quality spoils before the ink level says cartridge is empty. Want to know how to unlock door cartridge manually so that I can change the low ink cartridges. Forums online with HP Tech answers don't address this issue. Nothing in the printer mau