"Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

Similar Questions

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Receiving a message to activate Windows 7 online. Tried this and it will not activate. Windows 7 on your MAC with Parallels.

  Activating Windows 7

  I BOUGHT WINDOWS 7 WITH PARALLELS DESKTOP 5.  IT IS INSTALLED AND WORKING FINE EXCEPT THAT I GET A MESSAGE TO ACTIVATE ONLINE.  I TRIED TO DO AND IT WON'T LET ME ACTIVATE.  I CHECKED THE KEY TO PRODUCT AT LEAST 10 TIMES AND IT IS CORRECT.  I'M DOING SOMETHING WRONG?

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following the steps below.

  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. Select the telephone activation option, dial the given number and hold for a person pick up.

  For more details:

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  If you are still unable to activate:

  (1) download and run the Microsoft Genuine Diagnostics tool:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  (2) then copy and paste your analysis results.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Boot Camp keyboard and trackpad will not work. They do in Fusion

  Hello

  I have a problem with my VM ware / boot camp of activation. I have a Boot Camp partition on my Macbook Pro. I am able to boot the disc using the fusion, but when I try to use Boot Camp coming to the windows activation screen and my keyboard and mouse do not work so I can't press the button to continue. I tried to boot into safe mode on boot camp and the keyboard and mouse are not recognized either. I tried to plug in a keyboard and a USB mouse generic and is not no longer works. I am running XP pro (not OEM version).

  Does anyone have any suggestions on a cure?

  Hi tsugua,

  This sounds like it may be more than one Apple, or Microsoft problem. However, my recommendation would be to ensure that the leopard drivers have been properly installed. To install the insert drivers your Leopard installation disc and run the setup.exe if is not autorun. So, make sure you run software updates of the Mac OS to ensure you have the latest version of the Bootcamp drivers.

  Let me know if this helps.

  Eric

• Vista will not start and the Startup Repair boots in a blue screen of death. Why?

  I select run a startup repair, and it goes straight to the blue screen. When I start normally it justs sits there with the bar go green around and around. System Restore also dosen't help. I can boot into safe mode, but I don't know of other programs of Diagnostics. In addition, no virus. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Read the posts by spirit MVP in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista will not start just goes to windows error recovery

  I have owned my computer a year and a half and had a lot of problems with it. I had 3 replaced hards and a motherboard.  my computer is turned off, then back on error windows approached and evry time I click an option, the computer shuts down then restarts his return to windows error recovery. I tried to put the recovery disk in, but it does nothing I also tried windows made it sit and tried the disk that is supposed to find the r but nothing will work. all of the suggestions.

  
  

  Recovery mode f11 does not work as well

  even in f8 f10 if I push the options it just stops and returns to the menu of this same

  I think that it is high time they gave you another to replace this one!

  You had such a race of bad luck, it would be more advantageous for them replace then keep "fixing" for you.

  Good luck with them and thank you for the reply.

  See you soon. Mick Murphy - Microsoft partner

• When you download the creative combination 6 applications it forces and now will not start download again because of an error

  I was download of creative applications 6 suit and he asked me to force quit other applications so I did and with them it forces to leave the Setup program and now when I try to download an error screen appears

  UINSTALL anything cs6 which can be installed.

  Run the vacuum cleaner by the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer and try again to install cs6.

• Startup Repair cannot fix issues and vista will not boot

  I have an asus laptop. A few days ago when I tried to run vista, he began to display a Startup Repair window: If problems are found, Startup Repair will fix it. Then it takes awhile, and then he said that he could not fix the problem, and the details of the problem are:
  Signature of the problem:
  Startup Repair V2
  Signautre problem 1: AutoFailover
  2: 6.0.6000.16386.6.06001.18000
  3: 6
  4: 1114127
  5: NoRootCause
  6:NoRootCause
  7:0
  8:1
  9:SystemRestore
  10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Can you help me?
  Thank you
  Piotr

  Hello Pelle24,

  Thank you for using the Microsoft Windows Vista Forums.

  I found a site that will guide you through to fix this problem.  Please let me know if this solves the problem, or if you're still having problems.

  Windows Vista no longer starts, and the startup repair does not solve the problem:
  http://support.Microsoft.com/kb/934540 James Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

• What start verifying DMI Pool Data of average failure (ATAPI) CD-Rom

  What does it mean? Audit (DMI) pool data Boot of average failure (ATAPI) CD-Rom

  Hi LarryR75248,

  ·         Exactly when you receive this error message?

  ·         What operating system is installed on your computer?

  ·         You did changes to the computer before the show?

  This problem may be caused by one of the below mentioned reasons:

  i. corrupt boot on the computer files.

  II. for hard disk parameters are not correct.

  III. floppy drive or a CD in the computer where the problem.

  IV. Boot devices not set correctly.

  c. connections loose or disconnected.

  VI. bad hard drive or other defective hardware

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See the following article for more information on the issue:

  "Verifying DMI Pool Data" error message and the computer is not available

  http://support.Microsoft.com/kb/287553

  Note: Article applies to Microsoft Windows 95 & 98. It's just for more information on the issue, that you face.

  Let us know if this information useful.

• Computer will not start normally - boots to the BIOS boot screen

  Hi, today I had problems on my computer and it will not start normally upward. This started happening today. When I turn on the monitor, the HP logo appears on a blue screen (as usual), but then, there are a lot of vertical white lines grouped perfectly on the screen (it's never happened before) he started to arrive yesterday. and when I try to start it, there is just a black screen for a long time and sometimes the system recov appears but it takes SO long to finish so I just stopped and went into safe mode and did a quick scans with Malwarebytes, MS Security Essentials and SUPERAntiSpyware, but they are all come clean except SUPER which came with a few things from tracking cookies...

  Today, I have scanned a full scan with malwarebytes and it says that there is no infection.

  can someone help me? I'm at the library atm! Thank you!

  Picture of the blue screen with lines here: http://img638.imageshack.us/img638/8583/post1278441253416372.jpg

  also - im wondering how to start with recov disks? I have two drives but only as on slot dvd thing and I know to start upward with her? should I boot with it because the layout is a little down? and I don't have an installation disc windows vista then Yes.

  Thank you very much!

  Hello Winston,

  According to the image that you posted, it seems that the blue screen is a blue screen with the HP logo on the subject.

  If this is the case, then the machine has not yet reached Windows and is suspended in the machine Power On Self Test.

  My recommendation for this scenario is to contact HP about what there is something at the level of the material / process/firmware BIOS which prevents the machine to get it to start Windows Vista.

  Let us know what they have to say.

  Best regards

  Matthew_Ha

• Computer stuck on Verifying DMI Pool Data data

  try to start on an old IDE HDD and blocked on the verification of dmi pool data each time.  BIOS recognizes both the hard drive and the optical drive.  can boot from CD and I tried chkdsk running, including fixmbr and fixboot, which did not help.  also changed a lot of settings in the bios, trying to find one that works as a "Fail-Safe by default" and "optimal by default".  not sure where to go from here or try some of them again, maybe I've done something in the right order?

  Thanks in advance for the help
  Edit: as a side note, one of my anti-virus just detected a virus before the computer as forced a reboot out of my control.  It would not start again under windows because of this error

  Hi ChristopherJohnston,

  First check and make sure that all physical connections on the computer are correct.

  I suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Install Windows 7 stuck on screen 'Verifying DMI pool data'

  Hello

  so I installed windows 7 on my aspire m1110 (Cpu: AMD Athlon 64 x 2 4800 + Ram: 3 GB video card: ATI Radeon HD 3450 1526 MB) and the final rebot, the computer is stuck in the screen "Verifying DMI pool data". Then after an hour or two, I forced the computer to shutdown (clicked the power button) and after it the pc just does not start. NOTHING. I click the power button and does not appear any image. I can't boot from the cd or dvd... I can't do anything. Could someone help? I'm tired of Windows vista because it's so slow and I really want to Windows 7. Meanwhile, I solved and back to windows vista, but I don't want that. My computer is not compatible with windows 7?

  OK, first you install windows 7, it goes through all the steps and installs and then when is it recharges and gets stuck on VERIFIANT DMI, shut down the computer and boot from the cd again once, when it loads and goes to the screen when you press INSTALL WINDOWS on this screen, it is also a windows repair option press that and don't select auto repair. go to the command prompt

• Operating system will not start and run - error codes 2000-142, 0F00:075 D, 41166486 uncorectable data error media wrtie block protect error code 0F00-0244

  I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks.  Can I fix?  Joe

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if you can start the computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck