What the * arrived at my Inernet Radio after the upgrade to the latest version of iTunes! ???

I installed iTunes and my Mac OS X to the latest version and now my internet radio option is missing in iTunes? Seriously * offshore.

Everyone know the loss of their favorite channels FREE!

It's still there. Click the three dots next to the music Note in the upper-left corner of the iTunes bar, tap the icon of Internet Radio:

Here's the Support article that can provide more information:

12 iTunes for Mac: listen to the radio on the Internet

See you soon,.

GB

Tags: iTunes

Similar Questions

  • After updating to the latest version of Itunes, it works really slow, takes more than a minute to recognize my Iphone and will not correctly backup my Iphone

    IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17

    After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed

    Running on a 64-bit Windows 8.1 Dell computer.

    ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.

    I rebooted the machine. Remove the locked file. All have failed to solve the problem

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.

    TT2

  • To restore the backup of information to my new iPhone 7, I had to update iTunes.  I did it on my computer, but when I plug my phone into the computer, it tells me that I need the latest version of iTunes.  What should I do?

    I downloaded the latest version of iTunes to restore the backup of my new iPhone 7.  When I plug my computer into iPhone 7, I get the message that I need to update iTunes.  It is to show that I have updated the latest version, so I now do not know what to do.  Need help!

    In iTunes, go to the ' about iTunes' topic. What version do you currently use?

    What version of OS are you using on your computer?

    Your new phone should you use iTunes 12.5.1 requiring 10.9.5 OSX or higher.

  • I can't sync my phone to my computer and get the message that my phone doesn't have the latest version of Itunes. I downloaded the latest version on my mac, but what I do on my phone. I'm used to be able to synchronize the two.

    I am more able to sync my I phone on my Mac and get the message that my phone cannot be used because it requires a newer version of iTunes. He tells me to go to www.itunes.com to download the latest version of iTunes... I downloaded the latest version on my mac, but what I do on my phone? I used to be able to sync the two and now I can't even download the photos from my phone on my mac...

    iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

    Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  • iPod sync after updating to the latest version of itunes

    After you have installed the latest version of itunes, my ipod will not sync.

    If it displays in iTunes? If this is not the case, try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

    TT2

  • I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

    I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

    (1) temporarily disable your security/antivirus software

    (2) download iTunes from the official source: http://www.apple.com/itunes/download/

    (3) try to reinstall

    (4) turn on your anti-virus

  • How would I go about installing device driver USB mobile Apple who is missing after upgrading to the latest version of iTunes? I use Windows 10. Thank you.

    There are some days that I installed the latest version of iTunes. I've also updated my iPad 2 and iPhone 4 iOs 9.3 sec. Now I can not activate the iPad and iTunes on my PC does not show the iPad, or iPhone. I've gathered that the Apple mobile device driver is missing, but don't know how to install it. Any help?

    Maybe isn't a driver problem.

    Help here > How to restart the Service Apple Mobile Device (AMDS) on Windows

  • Why not the new iPhone 6 connect to iTunes? It says I need to download the latest version of iTunes, but my version is the latest. 12.4.3.1

    I've updated iPhone 9.3.3 and iTunes for 12.4.3.1; both the latest versions

    But iTunes does not recognize my iPhone, why?

    Where you say that you need to download the latest version of iTunes? What is a ToolTip that appears in iTunes when you connect iPhone to your computer? Because if this is the case, iTunes detects your iPhone. So where is the problem? It won't let you not sync to iTunes? It won't let you save with iTunes?

  • I can't sync my iPhone SE because it took the latest version of iTunes, and I have already!

    Hi people, I want to synchronize my iPhone SE with the data (music and pictures), I have on my iTunes on my Windows PC. I did all the steps correctly, the way I used to do with my iPhone 5 c (I had no problem with it). When I connect the cable of the lightning to my iPhone, I get this sign "the latest version of iTunes, visit www.itunes.com/download to get the most recent version", the thing is that I already have the latest version of iTunes, because when I go to "help > Check for Updates" it says I already have the latest version. " Furthermore, I reinstalled iTunes just in case some files may be broken and the same attention sign and blah blah blah. Can you help me with this problem? Thank you!

    What version of Windows do you have?

    The iPhone IS requires at least iTunes 12.3.X which, in turn, requires Windows 7 or later.

    If you are still using Windows XP, the latest version of iTunes that you can run is iTunes 12.1.3.6.  If this is the case, I'm afraid you're stuck.

  • I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

    I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

    iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

    Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

    If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

  • New Iphone 6s says the latest version of itunes that I have. any advice?

    I'm trying to set up my new 6 s. when it's plugged in it says that he needs the latest version of itunes that I have (11.4). I can't synchronize my computer nor the iCloud. any advice?

    It is not latest version of iTunes he. What version of Mac OS X on your Mac? Most likely, you need to update your OS X in order to install the latest version of iTunes.

  • can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

    Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

    Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

    I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

    I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

    For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Air iPad will not be updated on the latest version of itunes

    air of the iPad will not be updated on the latest version of itunes and continues to request the latest version of itunes

    What version of iOS is installed on your iPad? What version of iTunes is installed on your computer?

  • Download the latest version of itune

    I recently traded the new iphone with apple store with my iphone 1 year 6 more. I backed up all of my old iphone to my itune now I plug the new iphone to my macbook, it says "Download the latest version of itune" I downloaded but it still says the same thing. It does not leave my iphone one access to the itune I can't backup my iphone. Help, please!

    What version of Mac OS X you have on your Mac? iOS devices 9 require OS X + 10.8.5 and iTunes version 12.3, + do to sync them

  • Why not the new iPhone 6 connect to iTunes? It says I need to download the latest version of iTunes, but my version is the latest. 12.2.2

    Why not the new iPhone 6 connect to iTunes? It says I need to download the latest version of iTunes, but my version is the latest. 12.2.2

    What is the eversion of Mac OS X on your Mac? The latest version of iTunes is 12.3.2. You need to update your OS X to download the latest version of iTunes.

  • Download the latest version of iTunes with Windows 10

    I can not download the latest version of iTunes with windows 10 to my laptop. I get the following message "the feature you are trying to use is on an unavailable network resource" I don't know what that means.  Any suggestions?

    Hello RavynnG,

    Looks like you have a problem with the installation of the latest version of iTunes on your Windows computer, the error message you describe. Is this correct?

    This sometimes occurs when the Windows registry has conflicting information on software are installed. One of the users of Apple for support communities - turingtest2 - has written a useful resource for this situation, found here - troubleshooting problems with iTunes for Windows... | Apple Support communities

    Specifically -.

    The following steps should remove the reference to a file missing .msi Windows Installer Service trying to access when installing iTunes.

    1. Press WinLogoKey + R, type Regedit in the Run dialog box and then press enter/return.
    2. Click on Edit > find, type the name of the file .msi problem, for example itunes6464.msi, change the boxes look so that only the data is checked, and then click Next. You should find it somewhere:
      HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ {long string of letters & numbers} \SourceList
    3. Right-click on the parent key immediate with the long string of letters & numbers that contains the list of sources with the reference to the .msi file, and then click export, save it to say the office with name iTunes.reg if the data can be restored if deleting it does not help. Now right click on the key again and select delete from the context menu. This should prevent the Windows Installer to search for the .msi file when you reinstall iTunes.

    If installation will not yet pass by then double-click on the file iTunes.reg that you did to restore the data in the registry, and then use the method shown to install missing components to unpack the installer of your previous iTunes installation, then extract the .msi file, you need. Double-click this option to try to uninstall the component. There are links to recent versions of iTunes in the section of the older versions .

    Once completed, you should be able to run the iTunes Installer, you can download it from this location - iTunes - download iTunes - Apple

    Thank you for using communities of Apple Support.

    Secure computing.

Maybe you are looking for

  • iPod to iTunes PC sync

    How can I synchronize content (copy) an iPod to a new iTunes library on a PC for Windows 10? Any synchronization how - I've seen show how to sync iTunes to an iPod. I want to go the other way - sync (copy) content from iPod to a new iTunes library on

  • Please choose which operating system to start: (timer on)

    When I start it, I get a black screen with white text, asking me to choose a system to start - and a countdown timer. I have two identical choices (identical wording - Microsoft Windows XP... for this purpose). By selecting the first load my Windows

  • Addition of family XP Edition Remote Desktop Services

    I have a laptop with Windows XP - Home Edition.  I want remote access to this laptop to a Tablet using the Desktop Client remotely by Xtralogic, Inc. The presentation of the product Xtralogic said, "the following operating systems have remote desktop

  • Der Bootsektor dieser wurde neu standing floppy

    Hi, I have windows vista on my computer, when I scanned my computer with Avira antivirus and restarted, I started getting the following error message: Der Bootsektor dieser wurde neu is floppy. Use Sie den BACK instruction SYS um sharp floppy boatabl

  • Card not recognized on computer after upgrade to Vista

    I have windows XP, I've upgraded to windows vista now my computer does not recognize the photos on my memory card from my camera. It worked when I had xp. How can I get my computer to read the memory card?