What to do if the reset button does not work on the Airport extreme a1408 w / Password lost?

What to do if will not work the Reset button on Airport Extreme a1408? The password is lost (bought used). I spent several hours trying every method I could find anywhere on how to reset; soft, hard and default. Airport utility doesn't let me do anything without the previous owner password. I can't get him.

Can anyone help?

At this point, your only hope is to open the AirPort Extreme to try to repair the reset button... If possible. This link provides some tips on the process to open the unit.

https://www.iFixit.com/device/Apple_Airport_Extreme_Model_A1408

Honestly, it isn't easy, unless you're a guy real DIY, you can buy an A1408 used on Amazon for about $35-40.

Tags: Wireless

Similar Questions

  • Send and reset buttons does not work on the contact form

    Hey, I use Flash CS3 and ActionScript 2. I created a simple contact page, inside a clip (because I got fading), I put the script in the main timeline, so not inside the animation, but the buttons send and reset may not respond. I checked the instance names and spellings are correct, here is the script I use:

    contact_tween.send_button.onPress = function() {}

    If (name eq ' ' or subject eq "" or message eq ' ' or by e-mail at eq "") {}

    Stop();

    } else {}

    loadVariablesNum ("form.php", 0, "POST");

    gotoAndPlay (211);

    }

    };

    contact_tween.reset_button.onPress = function() {}

    name ="";

    subject ="";

    message ="";

    email ="";

    };

    so, what I am doing wrong? any help appreciated, thanks.

    PS. contact_tween is the name of the movie I created to fade the page contact and exit.

    If you want to hire me to solve your problems, send email via my website (www.kglad.com).  free help continue the validation of this forum.

  • KitKat reset button does not work, how to reset when I can't get past the first screen?

    I want to do a factory on my Acer Android tablet kitkat rest, I can't go past the screen lock, even if the pin code is correct.  I have tried a paper clip in the hole reset several times, but nothing happened.  Nothing has changed.

    I read some comments and opens to the rear to remove the battery, but there is no way that I can do.  Something has been said about pulling the gray wire a little bit, but I'm suspicious

    All I want is for the tablet to g back to factory default.  Is there another way?

    Oh, downloaded the user manual and who do not uncompress right.  I have no file to play it's a user's guide.

    Thanks, but I watched a video on Youtube.com that showed how to hold down the sound buttons and power at the same time until the menu appears where you can choose to do a factory reset.  It worked!

    Thank you for your time.

    Taylor

  • Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

    Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

    See if the troubleshooting steps in this article to take help supported:

    If the slide on the upgrade screen does not disappear once you upgrade to iOS 9 - Apple Support

    See you soon,.

    GB

  • Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

    I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

    One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

    You can also try to repair the database of places with this extension:

  • "back" button does not work and the home page does not display on startup

    My buttons next and previous no longer work. They show just gray and I cannot click on them.
    Also my home page does not appear when I launch firefox.
    I reinstalled firefox 4 and then I went back to firefox 3.6.16 and have the same problem in both versions.
    Don't know what to do anymore
    I just found out that when I opened a second window everything works well in the second window, but it still does not work in the first window.
    The same thing happens when I close both windows. The first window of my home page does not appear and the back button does not work, but the second window is operating normally. Including my home page.

    Try:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

    • Makes no changes on the start safe mode window.

    See:

  • Re: Satellite L655 - the Touchpad on/off button does not work

    This morning, I noticed that the power button of the touchpad of my Satellite does not, although the Fn + F9 key combination works by enabling and disabling my touchpad.

    It was working well until what I slept last night when I woke up, my laptop has rebooted due to updates of Windows during the night. I don't read anything since I have been using a wireless mouse. Then reach work and check if I can activate my touchpad (Windows has loaded and connected), the display screen that shows if the touchpad is active or not does not appear and my touchpad, power button does not work.

    Any help is greatly appreciated.

    Thank you.

    Is this problem only you?
    I mean it's not so important, and I would not reinstall or change anything because of this.
    Until you can use the FN + F9 key combination I put t think it's a serious problem.

    What do you think of this?

  • Compact Z5 camera away from the lock screen and the camera button does not work as well

    Don't know what that happen but the icon of the camera on the lock screen suddenly disappeared and camera quick launch button does not work as well. Can I still use the camera from apps however.

    Problem solved through launch quick adjustment of the device. However, didn't turn off in the first place. Hoping that this is just a small problem

  • my web button does not work for fast internet access. should what software I install

    my web button does not work for fast internet access. What software do I need to install. What past agter my hd crashed and I needed to replace it. THX

    Hello

    What is the model # computer? Check the following link to locate the model #:

    http://eSupport.Sony.com/us/p/support-info.pl?info_id=264#notebook

    You need Splashtop - software for fast Internet access. By pressing the "WEB" key when the computer is turned off, this software allows access to an Internet connection.

    Enter the model # below to check the software on the support page:

    http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

    If my post answered your question, please mark it as an "accepted Solution".

  • CLOSE first button does not work, but the second is

    Hi, I'm working on a new web site using Flex 3, but I have a weird problem where I got no information yet on the issue. I opened a TitleWindow to display a full-size image where I want to show a close button at the top and bottom of the image, a close button (some images are very huge and it is the purpose of the TitleWindow). The close button in the button works fine, but one upstairs work not at all (but it appears correctly). What I tried to do was to create 2 HBox inside an HBox. The two HBox are called hbox1a and hbox1b. In the hbox1a, I put a tag that contains the title of the image. In the hbox1b, I put the close button. But the "close" button down is not inside an hbox, pay only the next component in the TitleWindow.

    If anyone can help me to understand why the first close the (top) button does not work, I appreciate to understand.

    Thanks for any help!

    Well! It is always good to be able to respond to ourselves, but it was fast! Maybe because to explain on this forum has been a good thing to clean the idea!

    In any case, I decided to create a new function to close the TitleWindow where I decided to pass the ID (name) of the TitleWindow instead of the event.currentTarget.parent and it works! So I think that I can reduce this to a single function and use my second function for the two close button.

  • "Back" button does not work with the latest version of any help?

    Hi, I use the latest version. When I go through the pages, I can not be able to return to previous pages. The back button does not work. When I click the back button, the same page, it's not coming back... Any help would be much appreciated!

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    You can click right back or front button to open the history list.

    You can hold down the left button of the mouse either back or next to the history tab list opens.

    The current active entry has a bullet in front of it.



    If you place an entry in the historic session with the mouse tab, so you see an arrow to the left pointing (rear) left or right (forward) to show the direction.

    You can left click on an item to open it in the tab active or middle-click or Ctrl, click on an entry in this list to open that link in a new tab, just as you can with the other links.

  • Why not Firefox 4.0 back button does not work since the homepage or google search?

    I've just upgraded to firefox 4.0 tonight, and the back button is not working properly of my homepage or certain types of google searches.

    I can reproduce this problem every time by following these steps:

    (1) open a new tab, and I get a blank page.
    (2) select the Home button. I find myself at http://www.google.com/ig
    (3) go to the address bar type in a new URI, and press return

    Now, I leave my home page and go to the new page, but I can't go back to my home page.

    Similar behavior happens if I do a search on google for the address of quick search in the upper right.

    (1) start a new tab.
    (2) enter a search term and press enter
    3) click on one of the links to research and you transition to the new page, but the back button does not work.

    It works fine if I do something like:
    (1) open a new tab.
    (2) enter google.com in the address bar and press to enter.
    (3) do a GOOGLES search arae.
    4) click a search result link.

    This works very well for me.

    In my case, I turn off the Add McAfee SiteAdvisor 3.3.1 and the problem goes away.

  • The jump button does not work on iPhone

    Skip to the next song button does not work on iPhone. When you press the jump key, instead of going to the next track or shuffle to the next song, he repeats / restarts the track that is currently playing. Even when the song ends, it starts all over. It's like all my songs are stuck on repeat. The only way to change a song is by manually choosing a different, or by manually typing the shuffle button. Everything worked great yesterday. I asked several of my friends to check my conclusions, and they have confirmed the same questions. If anyone knows how to fix this help please.

    Hello Gus87,

    I understand that your iPhone seems to be stuck playing the same song, regardless of your attempts to move to the next track. This may be due to the function "Repeat" enabled in the current reading on your iPhone screen.

    • Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

    Repeat steps. Press on to repeat an album or a playlist. Double click to repeat one piece.

    iPhone user Guide - play music

    http://help.Apple.com/iPhone/9/

    See you soon!

  • Volume up button does not work like the shutter of the camera

    I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

    Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

  • the light on the power button does not work. How can I activate it?

    HP pavilion dv7

    Windows 7.

    the light on the power button does not work. How can I activate it?

    If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.

    BRAVO is just a system we use to say thank you to informative messages.

Maybe you are looking for