When adding borders, I get a border grid instead of color why?

Similar Questions

• When adding printer, I get an invalid code

  I have a HP 4620 that I just bought.  I had a lot of problems connecting to wifi, but my cable provider has me

  the entire facility.  I use Windows 7.  When I click on add a printer that I enter the e-mail address that is on my printer

  and he says it's an invalid code.  He also says that I can change this email address by clicking on edit which I can't

  To find.

  The printer code must be printed and used within 24 hours or you will get an invalid code. If you have printed it and spent 24 hours so you can reprint just the code, but it must be printed before this will work on the ePrint site. You get a signed time and code then you will have a chance to change the email address of the printer.

  Let me know how it goes.

• Get an error (you do not have sufficient permissions to perform this task) when adding a header and a footer. Any help?

  Get an error (you do not have sufficient permissions to perform this task) when adding a header and a footer. Any help?

  Hey veeran14642260,

  Us would certainly help.

  Could if it please let you me know what software used to create the PDF file. What is the software Acrobat Live Cycle Designer or something else?

  If you have created the file using Live Cycle, then it would be possible that you do not have permission to add the header/footer in the file.

  In addition, check under "file > properties > Security" and check if there is no security on the PDF file.

  Let me know.

  Kind regards

  Ana Maria

• Why the video quality is so low when LITE c4d file is put in the AE? Why I can't get rid of grid?

  When I put my file lite c4d in AE video is very bad quality... Lower than when I use View Render in c4d. Also, how can I get the perspective grid is displayed NOT in AE when I drag the file? I have the OFF perspective grid in c4d but it always appears when the c4d file is placed in a model of EI.

  I have attached a picture of what the video looks like at 100% size, total quality in the AE comp window.

  Game to the final in the plug-in... Read the help on the use of C4D files in AE. It's really basic things.

• Hi all, I'm haing adding items to my folio. When I try, I get the message ".

  Hi all

  I'm haing articles adding my folio. When I try, I get the message "Network failure." No idea what to do?

  There are known server problems. You can check the status here:

  http://status.adobedps.com/

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• When I try to get on the stick of msn games, it tells me to try re launch my browser every time. Also does the thing same om poker.

  When I try to get on the stick of msn games, it tells me to try re launch my browser every time.  Also does the thing same om poker.

  Hello

  1. what web browser is installed in the computer?

  2 the actors that this problem occurs with all games online?

  If you use Internet explorer, I suggest you to see link and check.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Muse is so slow, especially when adding hyperlinks

  As a designer than a programmer, I love Muse, so similar to the sensation to Indesign. She allowed me to do at my site design is amazing, but...

  Now really worried that I chose the wrong software to develop my new site. Get slower and slowest of the day.

  Now cannot be used professionally.

  Every action is so slow. Multicolor spinning wheel is displayed continuously.

  The slower action seems to be when adding hyperlinks. Certainly, there is a little (about 150 per page over 100 pages, it's a ticketing site).

  When clicking on the hyperlink insert the window of the menu drop-down appears quickly, but I have to wait almost 30 seconds before I can enter the link and then another 30 seconds by clicking on back for the link to be accepted.

  30 seconds may not seem like a long time but believe me, it's when we look at a multicoloured spinning wheel. With 150 links per page, which is more than 2 hours of wasted time.

  Is there anyway to speed up this process? Is there anywhere in preferences to say Muse to reduce the number of previous installations of links used in the menu drop-down? If it would expedite the operation?

  Any help would be appreciated, because I don't want to renounce the Muse. Thank you.

  Yes, 2015.2 is faster. But... you can not expect the sedan city it will be a big truck. Different tasks have different tools. Muse is not really suitable for large sites. Not only because of the speed.
  CMS is a completely different usability, allowing to work with directories. Muse can't. Everything must be done manually, which leads to loss of time and difficulties with seo.

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• images stripped when adding link

  Hello

  It's the first time I have currently allows to code a site and I have read and watched a lot of tutorials.

  now I get a layman in photoshop, sliced it, saved for the web

  then, in dreamweaver, I opened the page, and now I have a nice site,

  but when I add a hyperlink to my head, the only thing that has changed in the script was the < a href = "index.html" > code

  but when I look at my creation mode, than all my images shifted a few pixels in different directions with white gapes between the two

  also, a blue border appeared around my head.

  What can I do to add hyperlinks to my images and not to spoil my other images?

  Thank you.

  When you enter the link in the property inspector, enter a value of 0 (zero) in the area of the border. Who will care for the blue border.

  No idea why the other images behave the way that you say they do.

• When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• I had version 9 ff. When I tried to get on FF, I got the 404 error code on the server. I uninstalled ff and reinstalled version 12. Always get the code 404. Help

  I have Windows XP. I can not access FF. When I do I get error code 404 and the message "URL/firefox is not found on this server." It started today, I had version 9 ff. I've uninstalled and reinstalled version 12, but still not same error when you try to access the FF.
  PS: Other browsers work fine

  Try to open Firefox and Google by typing in the address bar at top and press on enter... If it works, I'd say something happened to your homepage settings and try this: How to set the home page

• YouTube said that there is a message titled "authorization" when I try to get onto the site with Firefox. Can I fix?

  When I try to get on YouTube, the site is completely white with the words "Authorization error" in the upper left corner. For a while, all I had to do was charge YouTube and it was fine. Now it won't work at all. I have Internet Explorer on my computer as well and YouTube works fine there. When this error occurs, the icon in the bar of Exchange address back to the old icon of YouTube.

  I tried:
  -Updated Firefox
  -Restart the computer
  -Closing and reopening of Firefox
  -Type https rather than http before the address
  -Google search and clicking the Google link on the site (Yes, a feeble attempt, I know)

  Anyone know what I can do to put YouTube on my favorite browser? I would like to stop having to run in Internet Explorer using this site.

  Thank you!

  I found what was wrong. Internet security blocked it without letting me know. Thanks for the help =)

• When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work?

  When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work? The rest of the functions in this section seems to work. And I can get MY addons, but not the available modules.

  On the left side, click Extensions.