When I don't play driving simulator 2011, it says "no access to direct 3d. What should I do?

Similar Questions

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Installing the card Point 2011 stops because the prerequisite programs moved. What should I do?

  Installing the card Point 2011 stops because the prerequisite programs moved.  What should I do?

  Hello

  Check with the help of MapPoint and in the MapPoint Forums.

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I open my digital books in Adobe Digital Editions is always the message: E_ACT_NOT_READY, what should I do to solve this problem on my computer?

  When I open my digital books in Adobe Digital Editions is always the message: E_ACT_NOT_READY, what should I do to solve this problem on my computer?

  You open forum duplicate questions: when I open my digital books in Adobe Digital Editions is always the message: E_ACT_NOT_READY, what should I do to solve this problem on my computer?

• The icon of my creative cloud that appears on top of the MAC, the box and when you open the application is displayed in white. It does not work. What should I do? Thank you

  The icon of my creative cloud that appears on top of the MAC, the box and when you open the application is displayed in white. It does not work. What should I do? Thank you

  Please visit:creative cloud is empty window why?

  Re: Empty opening creative cloud app

  Cloud Desktop App is empty

  I hope this helps.

  Concerning

  Megha Rawat

• Message "List index out of bounds" appears when I try to get a file from the FLAME of my E: drive. What should I do?

  I use Apophysis7x15 c.9 fractal generator program that I downloaded years ago and have used every day since I downloaded it. It creates. FLAME files to save on my E: drive. Today I tried to recover the files already stored on the flash drive to complete the work on the image I have for years, and he gave me the message "List index out of bounds" and refused to access my folder. What can I do to fix this? The last time that my computer had an update was on 21/09/2012 from Microsoft for the Microsoft Windows security update. I used these files several times since then.

  [Moved from comments]

  Hello

  Look for when I try to make it is an error "List index out of bounds-1. How can I fix this?

  at the bottom of this page:

  http://apophysis.xyrus-Worx.org/

  Hope this helps,
  Don

• FF 8 stops downloading after 15 minutes when you don't surf not actively on the net at the same time. What can I do?

  Everything works fine except when downloading more large packets of data. Se is not a problem, but when I let the computer itself, downloads stop after a short time. FF8 and Internet still work. Never had this problem with previous versions. Help, please. I really don't like to spend hours in front of the computer, clicking every few minutes on an internet page just so that downloads are not interrupted.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  It is possible that your antivirus software is corrupt downloaded files or otherwise interfere with the download of files by Firefox.
  
  Try disabling analysis in real time (live) files in your software anti-virus temporarily to see if that makes working download.

  See "Antivirus disable in Firefox preferences - Windows."

  • http://KB.mozillazine.org/Unable_to_save_or_download_files

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to connect to my wifi it says limited access and it was working fine yesterday I don't know what's happened can someone help me please

  I tried everything and nothing work please help me this is not the wifi area, I cause I can go on the internet with my xbox

  Louis

  • You have a good signal for your WiFi?
  • Recent changes to your system?
  • Have you recently purchased any product 2.4 GHz can cause interference?

  You can try and uninstall the device and reinstall and make sure your driver is up to date follow the instructions below:

  1. click on Start and type devmgmt.msc, then Enter. The Device Manager window opens.

  2. expand network adapter.

  3. right click on the wireless network card and select Uninstall.

  4 restart the computer. Windows must now install the drivers itself.

  5. put up-to-date drivers in the same way but selecting put updated driver

• my hard drive has stopped playing audio, only during DVD playback. XP Home Edition. What should I do

  ASUS SDRW - 08D 1 S - U Eee PC

  Hi towertool,

  1. what type of file on the DVD?

  2. is it works much earlier? If so, then remember to make changes to the computer, after which the issue started?

  Try the steps from the link to the following article and see if it helps:

  How to troubleshoot problems that occur when you play a DVD in Windows XP

  I hope this helps.

• My icecast stream stops playing in 41 FF. has worked with 38, 39.40. What should I do?

  I am one of the developers of agile Streamer (https://wmspanel.com/nimble) support icecast.
  I checked my icecast with FF implementation regularly and everything was fine until the exit 41.
  Please take a look at the following example http://104.131.143.22/ff41issue/stream/icecast.audio
  It's mp3 stream icecast. Flow plays very well for 38,39, 40.0.3 releases but start reproducing strange noises on version 41.
  Very urgent for us please help

  You should contact the developer support. This forum is for the support of the end user.
  https://support.Mozilla.org/en-us/KB/where-go-developer-support

• When I opened a new tab, I want it in my page of boom. What should I do?

  A new tab opens to a blank page, I want him to go immediately to my homepage like Outlook does.

  Install the add-on following, then set options in the add-ins > new TabURL > Options

  • https://addons.Mozilla.org/en-us/Firefox/addon/NewTabURL/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• When I install NFS mostwanted Windows 7 ultimate 64 he says latest version of directx required.what should I do

  When I install NFS mostwanted Windows 7 ultimate 64 he says latest directx required. I have download dirctx on microsft site. After downloading the latest version of directx as I face this problem. I can't yet install nfs mostwanted.
  Please help me

  Hello

  Open DirectX Diagnostic tool by clicking the Start button, type dxdiag in the search box, and then press ENTER.

  For more information, see these links:

  Diagnose a fundamental problem with DirectX:

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to install an automatic update, I get an error Code 52D. What should I do?

  Error messages

  Hello

  Welcome to Microsoft Windows 7 Forum!

  You can try the following steps and check whether the problem is resolved.

  This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. click on the settings option to change on the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select the option check for updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• When you try to initialize creative cloud app get the message 'no subscription found. ' What should I do?

  I'm the Manager of the team. We bought three licenses. I downloaded everything and when you try to open Adobe InDesign CC 2015 on my machine I received this message: I was connected when I received this message.

  "No subscription found.
  We could not find a subscription Adobe InDesign CC 2015 associated with this identification code Adobe you can buy a new subscription or if you do not have a subscription and are unable to access it, please contact Customer Support.

  You can also choose to start this product at trial.

  Have a different Adobe ID? »

  I tried to disconnect, then reconnect and nothing has changed.

  This document should be useful.

  https://helpx.Adobe.com/creative-cloud/help/manage-teams-membership.html