When I install Windows Vista it gets stuck on the end of the installation.

Similar Questions

• I put a new hard drive in my laptop and when I installed Windows Vista I get this message: "windows cannot configure windows to run on this hardware of computers."

  I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers."  I can't install an oem on a new hard drive version?  This is the portable original in all other respects.

  original title: new hard drive and vista

  Hello

  strange that you can request that

  HP computers have been known to not let you install Vista on a non HP bought replacement hard drive

  There were a few posters with this problem here

  If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)

  You can change the hard drives, RAM, etc.

  I presume that you boot from the Vista DVD

• When you install Windows Vista I get an error: 0 x 80300001.

  during the installation of windows vista to the time it gets to download files in expansion, that it stops and I get error 0 x 80300001 how to fix this!

  original title: windows vista error 0 x 80300001

  Hello

  I suggest you to see link below and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/3021b3aa-CE05-4cfa-8119-a531ed2e4d63/

  Hope this information is useful.

• When I installed Windows Vista Ultimate oracle virtualbox has stopped working?

  I use Windows Vista Ultimate ISO in Oracle Virtualbox but when I install Windows Vista Ultimate Edition, Oracle VirtualBox is stopped working,:(, que dois_je faire?) my other operating systems in Oracle Virtualbox is very well.

  Hi Obito,

  The question you posted would be better suited on the Oracle Forums.

  http://www.Oracle.com/technetwork/Server-storage/VirtualBox/community/index.html

  https://www.VirtualBox.org/wiki/community

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.

• I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell

  I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance

  original title: where to find WIndows Poweershell?

  Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.

• I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed.

  Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.

  I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.  I'm I did somenthing evil?

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.

  Please answer these questions:

  It shows in system properties?

  To open system properties:

  (a) click Start, right click on computer

  (b) click on properties

  (c) see if it shows Windows Vista with service pack 1 on windows edition.

  Hope the helps of information. We know if you need help. We will be happy to help you.

   

• ERROR_NOT_FOUND (0 X 80070490) when you install Windows Vista Service Pack 2

  ERROR_NOT_FOUND (0 X 80070490)

  I tried and tried again to install Windows Vista Service Pack 2 x 64-bit system, but this error message keeps popping up. I tried to search for possible solutions, but they all tell me I have to use my Vista DVD. But there is a problem, I don't have it. I mean, that is, the gateway factory pre-installed Vista on my laptop, so I don't have the DVD. Is there anyone who can help me? THNX.

  Hi Jason,

  You can try the following solutions.

  Step 1: Download and install the system update readiness tool to run a single analysis for inconsistencies that may prevent successful installations of Windows Update.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Step 2: Try to install Windows Vista Service Pack 2 now and see if it helps.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  See also:

  Windows Update error 80070490

• Cannot install Windows Vista Service Pack 2. The following error message appears: 0X800707d1

  Hello

  Three years ago, I bought a Dell Inspiron 1525 laptop. Never met a problem until I tried to install Windows Vista Service Pack 2. I already followed each step instructions Support of Microsoft issues Service Pack for any result or solution. In these cases, I have downloaded the pack update directly from the wepage of Windows Vista, installed Windows Update Readiness Tool, disabled my antivirus (McAfee) and came up with nothing. I even tried to install this update in Mode safe but also failed to install Service Pack 2.

  What is happening all the time, is that I double click on archive downloaded in order to install (having already started my computer in Mode safe mode with networking reportoire and disabled the antivirus as well as its firewall). The Service Pack window opens and I click 'Next' for all the necessary instructions, including 'the computer automatically restarts. When the toolbar installation is completed, the computer automatically goes to restart itself. 3 steps appear as a requirement for the completion of the installation process. All goes well until he reaches "step 3 of 3:100% finished. Do not turn off your computer. After about ten minutes of stall in this step, the following message appears on the screen: "the Service Pack cannot be installed, returning from changes. Do not turn off your computer.

  The computer then rolls back all the changes and initiated in the normal state. After the opening, the first window that appears displays the following message: "the specific driver is not valid. "(Details): error: ERROR_BAD_DRIVER (0x800707d1). I proceeded to check and update alone driver of my computer, then try again to install the Windows Vista SP2 and all the operation has been a failure. I was cracking my head trying to solve this particular problem, and each time the same error pops up. I am seriously considering reformatting Windows Vista from manufacturer CD from my Dell, but I don't know if that would help.

  If someone could help or advise with everything that I would appreciate it a lot.

  Kind regards

  Rodrigo

  Hello

  Method 1: Follow the steps from the links below and check if the problem persists.
   
  Step 1: Safe Mode
  I suggest to start the computer in safe mode, then try to remove the Briefcase icon and check if it helps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the problem persists, I suggest you follow step 2 and check.
  Step 2: Clean Boot Mode
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the start link to configure the computer to normal startup mode.
  Method 2:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358
   
  Hope this information helps.

• I can't install windows vista service pack 2, receive the error code 490

  Tried to install Windows Vista service pack 2. (KB948465).   Received: Installation failed.      Also: element not found.      Error: ERROR_NOT_FOUND (0 x 80070490).     and finally the code 490 - Windows Update encountered an unknown error.

  Hello

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• When you try to perform a new installation of Windows Vista, it hangs on "preparing the installation" for hours, no progress.

  original title: FEE INSTALL WINDOWS VISTA

  FRESH INSTALL WINDOWS VISTA COMES UP please WAIT a MOMENT WHILE WINDOWS PREPARES to INSTALL for 1st TIME THEN A SERIES OF WHITE DOTS APPEAR ONE JUST KEEP GOING for HOURS and does not stop what I need too do

  Hello

  as you say that you use the recovery disk that provided the computer manufacturer, you will need to contact then on this problem

  It's their recovery process not microsofts

• When I send a message it gets stuck in the Outbox and won't unless I click on the message until it is "BOLD" with a print, then delete.

  Forwarded messages or new messages are not automatically leave and get stuck in the Outbox.  If I leave it alone, I get a message that there was an error and the message could not be sent.  However, if I leave the message stuck in the Outbox, the message gets actually released several times until I have go into the Outbox and delete the message.

  Compacting files try one at a time.

  To defragment:

  Start | All programs | Accessories | System Tools | Disk Defragmenter. Just above that you'll also see disk cleanup. I was running first and also in the other Options tab, the third option to get rid of old that take place of restore points.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• When you install Windows Vista on a laptop I get this error code 0 x 80070057

  I tried to fix & mobile friends for a while now & I have noticed that, during the installation of Windows Vista, it fails with a few different answers. The error code that showed, the majority being 0 x 80070057.

  The laptop is a MSI VR602 with a broken DVD player (I was the installation via USB) & other potential problems.

  A past remarkable repair I knew everything was the screen being smashed.

  However, when I saw if I could install it on my custom built computer installation flows well (I used the laptop HARD drive)

  I then tried using the disk HARD in the portable windows would begin not with success.

  I think that the cause could be the big difference in the environment.

  I formatted the HARD drive many times & installed via USB laptops with the same result.

  I also noticed another post that it is possible that the SATA connections could be blamed.

  Also at the start I noticed he said something like 'S.M.A.R.T. capable but failed the control unit'. When you check this on my computer, when starting my CHIP on my HARD drive just off computer & laptops.

  The HARD drive is a Western Digital WD2500BEVT.

  Windows Vista Home Basic final first version so that I could use the original serial code.

  I can't try it with an another HARD drive that I have not access to all.

  It would work if the installer has used the same exact files two mega & but there is no chance of this change.

  If someone happens to have a copy of the MSI files used on this computer is would be muched aprciated. (Sorry for the bad spelling)

  It is a 32-bit system.

  Another point is that when I tried to install Windows XP it installed for most, but crashed & had the problem with hal.dll file missing.

  Please post a reply if you know one. If you need information additional just ask.

  Don't worry, I managed to solve the problem. It's a corrupt installer. I have the laptop runs like new.

• 0x800F0826 error code when you install Windows Vista Service Pack 1

  I bought Adobe Creative Suite CS4, so the installer tells me that I am in need of Vista Service Pack 1 to continue to install the programs. So, naturally, I go online and try to find the Service Pack 1. Mind you, I was never even offered the service pack via Windows Update... I wasn't even aware that they came out with ALL the service packs for Windows Vista. I am running Home Premium, by the way.

  So find a download of the Service Pack and it ends after about an hour and a half. I'm going to install the service pack, and everything seems to go well until a few hours later when I get back to my computer and I have a message waiting on my office saying that the installation has failed. I studied the error code I received online (0x800F0826), and I noticed that a lot of people said it had to do with the updates that had already failed to install on Windows Update. Well, a lot of commentators on the issue suggested looking in Windows Update history and are looking for any updates. Well, it turns out that I have TONS that had failed in the past. I read that the updates that had a different other than 0x800F0826 error code were probably the cause of the problem. Well, they ALL have a different other than 0x800F0826 error code.

  What I noticed though, is that all have the error code: 80070057. I was eager to get a glimpse of this problem pretty quickly because I have a class to come within 10 days that requires the use of Adobe CS4 software and I can not install it until I get the service pack work! Any help would be GREATLY appreciated! Thank you.

  Hi notpaul,
  If you have not yet resolved this so I will answer your questions regarding upgrade\restore.  If you have a bunch of updates failed and are not offered SP1, the faster would be to do a factory restore.  Then immediately, run Windows Update until you are offered are no longer updated.  Then you can reinstall the programs and data.
  If you want to upgrade to Windows 7, so make sure that you perform the custom installation.  This option will do a clean install of the operating system.  You will need to reinstall your programs and would need to make a backup of all your data before the installation.  Here is a link to Windows 7 install information. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0x80000FFFF error code when you install Windows Vista SP1.

  Original title: I had a problem with service pack 1 on vista 32 bit [allways should I install

  I had a problem with service pack 1 on vista 32 bit [allways should I install on the window update

  Try this Fixit MS

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414#letmefixit