When I plug in my flash drive in my computer autoplay didn't pop up

Similar Questions

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• When I plug in my flash drive in my laptop drive usb flash drive flashes a light on it and then does not open drive gs

  as the computer does not recognize the flash drive

  Hello

  1. What is the operating system installed on the computer? What is Windows XP, Vista or 7?
  2. The same problem occurs with all Flash drives?

  Visit the link provided, download and run the Fixit.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Plug in a flash drive and get a bluescreen partmgr.sys

  I used a flash/usb drive in my HP probook 4530 s before.  I just bought a new lexar 4 GB Flash DRIVE and pluged in there.  As he was installing the driver, the laptop shown with an error partmgr.sys blue.  The laptop is only one month.  I am running Windows 7 Professional.   I tried to uninstall, delete the registry and reinserted it.  He still blue screens.

  I plugged the same flash drive on a dell optiplex running windows 7 Enterprise, and it worked fine.  It's obviously something with my laptop.

  Any help would be appreciated.
  Thank you
  Jake

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?

  Original title: memory card Problemz

  When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?

  Here's a way to accomplish the task...

  Apparently, you have an external or internal USB media player?

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download the files from here. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the files of your choice in a folder on your hard drive
  drive.

  Just click with the right button on a group of selected files and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

• Problem with the Flash drive on the computer.

  My folders on my flash drives appear flash drives, however, show have some use. When used on another computer, they are perfect. What could be the problem?

  Hello

  Have you tried another flash drive in this computer?

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then allows you to refresh the USB stack:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error-insert the disc when try to open the flash drive.

  Original title: why connect my USB drive as an external drive.

  When the flash drive is plugged into the USB port, it seems that it will be added as a flash drive, but then the following equipment added window indicates that an external hard drive has been added.  When I go into windows Explorer to open the drive in Explorer mode, it says to insert the disc.

  Hi JimScottATO,

  We will try this.

  First of all, make sure that you are connected under an administrator account on your computer. Then plug in your USB key.

  Click START then right click on my computer , then click MANAGE

  In the new window, click MANAGEMENT OF DISKS

  Find the name of your flash drive and right click.

  Click on the letter of change of road and railways

  And then change the drive letter to something not already taken by another drive on the computer, such as "x" or "v".

• I want to keep my albums separate when I move to a flash drive!

  How can I keep my albums separated when the flash drive!

  If you drag albums from the iTunes on the Flash drive window, create empty folders on the drive flash using the Finder.  One for each album, with the name of the album.  Drag each album in its respective folder.

• The Code 43 when you plug in a USB drive

  Original title: Code 43

  I have a drive hard usb. It worked, but when I tried to use it yesterday I got the 43 code that windows does not recognize my device. I moved it to another port, but it still doesn't work. I uninstalled the device and restarted my computer, but it is not always recognize it. I even took the battery. But that no longer works. Can anyone help?

  nike23,

  Because you are using a laptop, remove the power cord and the battery, hold the power button for 30 seconds, replace the battery and the power cord and then start the laptop to see if the USB flash drive can be read.

• Why e-mail messages are saved as .fol when I record to the Flash drive?

  When I save my Windows Mail emails to my flash drive it saves them as files .fol and I can not open them.

  How do you open them and is it possible to save the email in an easily accessible format?

  Hello

  Winmail.FOL contains information about the folder itself, it does not all e-mail messages.  The actual messages are stored as discreet. EML files that can be imported or slipped and fell in Windows Mail folders.

  Windows Mail does not export directly on an external support.

  First, export the e-mail messages to your hard drive, then copy from there on your USB.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• problem viewing on XP sp2 when the source is a flash drive

  I have a SanDisk 16 GB flash drive, with several stored movies.  Try to watch the movie on my laptop (Acer) and can hear the sound but no picute/video? All that it shows are the skins.  Thank you

  If they are be XviD .avi files... you probably
  need the XviD codec.

  This can be checked by using the free software GSpot:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Codec identifier
  http://www.headbands.com/GSpot/download.html

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

• How to get windows xp re - install for installing the flash drive to the computer error portable "windows\system32\config\system".

  My Acer Aspire One has error "windows\system32\config\system" How can I get a copy of windows xp original usb? When I bought the

  computer laptop windows xp made & paid for. Product key is on the back. Can I download & reinstall using a flash drive?

  C:\Windows\system32\config\system is one of the files that make up the system registry.  Backups of the system registry files are kept in the 'C:\System Volume Information' folder under the system restore program.  Probably all you need to do is copy of registry backups in the Windows\system32\config folder.  A reinstall of windows may not be necessary.

  To do this is to start your machine from a free "Live Linux" thumb drive.  You can create a startup disk Ubuntu here:
     <>http://www.Ubuntu.com/download/Ubuntu/download >

  Follow the instructions of "Try me" and you should be able to copy backups of registry in place.  Windows has "Hidden doubling" the System Volume Information folder, but Linux doesn't seem to have any problems with it.  After starting from the Thumb Drive Linux, follow the instructions in the following article from part 2, step 6, using the graphical interface of Linux to copy files (right click copy, make a right click Paste) instead of the lines of command in the article.  With a little patience, you can restore the registry from a backup, and be back in operation

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• When I plug my iPod Touch into my Windows computer, only SOME of my images appear.

  When I plug my iPod Touch 6 to my Windows 7 computer, only some of the pictures will be displayed. It seems that the only people who will not show are that I have taken in recent weeks. I need the photos as soon as POSSIBLE, so please help!

  Thanks in advance!

  Only pictures in the album film devices are easily accessible from the vi my computer computer or camera import app. For others you need a third-party as TouchCopy or PhoneView application

• Cannot install Plug & Play USB Flash Drive

  Flash player will not install automatically.  Get the message "Software was not Logo testing to verify its compatibility with Windows XP".  I tried to continue with the installation, but the computer does not recognize it.  What can I do next?

  Open "Disk Management" and see if the USB drive is listed.
  If it is then the reformat.

  J W Stuart: http://www.pagestart.com