When I plug in my flash drive in my laptop drive usb flash drive flashes a light on it and then does not open drive gs

Similar Questions

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I'm under El Capitan on MacbookPro. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall the CS4 Master Collection after failure of the card logical and all work EXCEPT Acrobat 9 Pro. I'm under El Capitan on a Macbook Pro. The program worked with El Capitan until the logic board failure - I use it every day.  I reinstalled the entire Collection, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  I tried to uncheck the boxes, but no difference.

  How can I get an operational program again? If Acrobat Pro 9 is no longer supported, how to get a version supported by software that works on my computer?

  Thank you.

  Thanks for the explanation. I actually have to install Acrobat and it now works. I downloaded and installed Adobe Reader XI (I think, http://ardownload.adobe.com/pub/adobe/reader/mac/11.x/11.0.02/en_US/AdbeRdr11002_en_US.dmg ) and opened the program. I noticed that after I opened the new drive, my Adobe Reader 9 program began to work. After that, I tried to open Acrobat and instead of getting the error 6 message that I had before, I had an error on a question of license that would require me to uninstall and reinstall the software. Once I did these steps my Adobe Acrobat 9 Pro started working! Don't know why my program, but it is fully functional again. I hope it helps someone else, I have why I came to answer.

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I am running Yosemite. on iMac. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall CS4 after failure of hard drive and everything works - photoshop, Indesign - EXCEPT Acrobat 9 Pro. I am running Yosemite on iMac. I reinstalled Acrobat from the disks, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  What is the cause? If yes where can I get.

  I tried to uncheck the boxes, but no difference.

  Is this or an activation problem

  Thank you

  K
  

  Hi Kate,.

  Acrobat 9 is not supported on OS of Yosemite.

  You could face compatibility problems.

  Kind regards
  Rave

• When I call a file in firefox, the address bar inserts a backslash (\) before the name of the file and it does not load

  When I call a bit files in a backslash is inserted during the loading of firefox (http://razorbackpark.com/%5Chole17.htm). Therefore it will not load. If I manually enter the file in the address bar, it loads very well. How can I fix this behavior?

  Hi LTCreations, glad to hear that worked. It seems clear some cobwebs that cannot be offset by other menu items, but I have not studied precisely the difference.

• The logo of help and Support does not open when I click on it. It has always worked before today, 7 October. Title: Help and Support

  Logo help and support on the office just stop working. How do you get it working again<>

  Click Start, run and type:

  %windir%\pchealth\helpctr\binaries\helpctr.exe

  Press {ENTER}

  If Help and Support Center does not open, try to reinstall by using the PCHealth.INF method which is explained here.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• When I download files, the system shows that she gets 99% done and then does not allow me to open the file.

  I am not able to download files.  The details are in the title above.

  Hello

  1. what file you want to download?

  2. based on what browser web you trying to download?

  3. were you able to download other files?

  4. have you received an error message?

  I suggest to perform the clean boot and try to download the file and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• drive CD shows autoplay, autoplay shows cd drive, but does not open automatically when the cd or dvd is inserted

  drive CD shows autoplay, but does not open automatically when the cd or dvd is inserted

  original title: Watch autoplay cd player

  OK, got cha.
  Try this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings
  b Eddie

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• When I click on the 'new tab' + sign it flashes blue but the window does not open

  mouse on the new tab brings up the message 'open a new tab '.
  clicking on new tab causes the + sign flashing in blue but window does not open. If I loaded AVG PC tuneup?

  Please disable or uninstall the Ask toolbar extension for your problem.

• DVD drive does not open. What can I do?

  Yesterday, the DVD drive in my Dell laptop, Inspiron, Windows Vista has worked very well. This morning, the drive does not open when I pressed the eject button, although the indicator flashed several times. Dell support site mentions try "eject feature in Windows", but I can't find information about this.

  It is important to get the DVD drive works because I'm ready to upgrade to Windows 7.

  How can I fix the drive?

  GordonP

  http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

  http://www.fonerbooks.com/laptop12.htm

  But first of all, you can go in my computer, find your dvd drive, right-click on it and click on eject.

  If this post answers your question, click mark as answer .

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!