When I plug my card on the motherboard wireless? He is defeated

Similar Questions

• Why the pictures open instead of iTunes when I plug my iPhone into the USB?

  Today, I upgraded to OS X El Capitan 10.11.2. I also updated my iPhone 6 p to iOS 9.2 and updated iTunes to 12.3.2.35. Now when I plug my iPhone on the port USB, Photos (1.3) opens automatically instead of iTunes. I tried to restart, but that solves nothing. How can I fix this problem?

  When the picture opens there is a box to uncheck it to prevent it from happening again.

• When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

  Original title: IPOD

  When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

  Any ideas?

  Hello

  1. were you able to use the IPod even without any problem before?
  2 have you made changes on the computer before this problem?
  3 have you tried plugging it into different USB ports and check?
  4. are you able to use other USB devices on the computer?
  5. have you try to use the IPod even on check and another computer?
  6. what operating system do you use?

  Answering these questions could help us help you better.

  Run the following article fixit tool and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

• you have the problem when I plug in my laptop, the brightness is low.

  you have the problem when I plug in my laptop, the brightness is low.

  No, when I plug it into electricity, it's low.

  It's usually the other way around... check the power settings. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• HP s5503w, Windows 7 ultimate 64-bit. Want to connect a player card on the motherboard.

  New to the Forum and looked but cannot find an answer to my question.

  I have a desktop HP SlimLine s5503w; what I need an answer, that's where on the motherboard I plug the card reader I have. Searched both here and on the web with no luck. A friend gave me a card reader and thought it would be good to use on the 5503. Anyone with an answer? Thanks in advance for your help.

  Roger

  Here are the specifications of your desktop HP Pavilion Slimline s5503w and its card mother M2N68-(Narra5). Based on the specifications, the motherboard has four headers USB as shown below;

  

  As long as the eMachines card reader is USB based, and uses the same pinout as the card mother HP, connect the drive to one of the 5-pin headers should work. Make sure that the four pins that have sons, go on the 4 pins on the motherboard... with the 'empty' PIN to the empty space.

  Also note that there is nowhere to get this card reader into your computer.

  Please click the White Star of KUDOS to show your appreciation

• To restore the backup of information to my new iPhone 7, I had to update iTunes.  I did it on my computer, but when I plug my phone into the computer, it tells me that I need the latest version of iTunes.  What should I do?

  I downloaded the latest version of iTunes to restore the backup of my new iPhone 7.  When I plug my computer into iPhone 7, I get the message that I need to update iTunes.  It is to show that I have updated the latest version, so I now do not know what to do.  Need help!

  In iTunes, go to the ' about iTunes' topic. What version do you currently use?

  What version of OS are you using on your computer?

  Your new phone should you use iTunes 12.5.1 requiring 10.9.5 OSX or higher.

• When I plug my headphones in the front jack 3.5 external speakers are NOT dumb

  Hello

  I recently reinstalled Vista Ultimate on a bigger hard drive, but now I have a problem with my audio devices.
  (1) when I plug in my headphones to the port of front 3.5 mm external speakers are NOT dumb.
  (2) the only way I can switch from headphones and speakers is by right clicking the speaker icon in the notification area, click playback devices and "Set is device by default", followed by restart the video or itunes.
  Can someone help me with this.
  In addition, and I don't know if it's related, but in device under 'Other devices' management, the SM Bus controller has a yellow Triangle with an exclamation mark inside.
  Thanks in advance for any help
  Concerning
  Rob

  This is controlled by the hardware itself or the driver software.

  You can try to install the latest audio drivers available from the manufacturer.
  If this does not work, you can try to contact the manufacturer for assistance.

• Display dims when I plug it in to the charger

  I have a fairly new laptop Pavilion g6 and I left it network connected for a few days. When I came to use it, the screen was very dark, so I cannot read. He lit up back to normal me when I unplugged it. Reconnect and the display then slowly dims.

  Have not left connected like this before. Drum recordings it is 100% full.

  Have seen this before on another laptop computer when the battery has been counted, but when it is full?

  Is this normal, can I change itl, or do I have a problem?

  Thank you very much

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button

  Please post here your positives or negatives in your thread.

• New printer HP 8600 how transfer photos from a memory card to the computer wirelessly?

  HP 8600 printer, put the card in the slot, desktop do bed not the map?  What should be my next move?

  Please specify

  First, click on the wireless or on the network icon at the top of the screen of the printer.

  Locate and note the IP address.

  Then, from your keyboard, press the Windows Logo with the simultanly key 'R '. the run dialogue box is displayed

  Type the IP address of printers with 2 backslashes to forward (for example \\10.0.0.1).

  Click on enter.

  Right-click on the folder of the memory card, then select map a network driver.

  Follow the steps and will be created a virtual disk with the contents of the card reader. You can access it from Windows Explorer, under computer.

• BlackBerry Smartphones battery goes dead when making phone calls or using the browser wireless

  Battery goes dead within seconds when the phone calls or using the browser wireless - software is a newer version of 6.0

  What is fix - camera works fine when text - another that this battery will die almost instantly - and the back of the phone generates heat so

  I've been running a new battery for a week - looks as good as new - thank you for your help

• Compatible video card and the motherboard

  Hi all

  I have a HP Pavilion Elite HPE-321i and I would replace my GeForce GT 320 with a GeForce GTX 650.

  I saw that it requires a PCI-E 3.0... is it compatible with my motherboard which is a MS-7613 (Iona-GL8E) with 1 PCI Express x 16 slot?

  Thanks a lot for your help

  André

  Chipset Intel H57 of your computer should be compatible PCIe 2.0 review. Most revision 3.0 PCIe graphics cards should be compatible with your computer. The GTX650 should be fine, but the 700 series may have problems.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• When I plug my headphones into the Jack on my laptop it does not cut out the speakers and turn on the headphones

  I have a PC running Windows 7 for HP Pavilion leisure

  Hello

  
  
  Thanks for your posting in Microsoft Community
  Is your question that the President is working with the headset mode
  
  
  Try to uninstall/reinstall the sound and see if that resets it. Remove the USB headset/microphone is not interfere or conflict with the next steps. Select the Device Manager and
  Go to the advanced Realtek device

  You should see two options from the playback device.
  

  See if one of the people to solve the problem. Right-click on the entry for the audio device from RealTek and then LEFT click on the device and click "Uninstall" DO NOT check the box to uninstall the drivers. Restart the PC and Windows starts it will detect and reinstall the RealTek sound
  
  
  You can contact the HP Support for hardware configuration

• error message when I try to connect to the internet wireless

  When I try to use the Internet, I get a message saying 'the settings saved on this computer for the network do not match the requirements of the network. I don't know how to change the settings so that it works.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? Good luck that the router settings have changed, or maybe it was
  reset - do you have other computers that connect to this router? You system connects to other
  WiFi as a library, Starbucks or other sites?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I plug my power supply laptop my wireless mouse doesn't work

  Compaq nx9600 and my new supply as so that I plug my wireless mouse stops working disconnect and it works.

  Tried to restart with the new offer of spower even

  Even tried to return the oval form

  Power supply matches the HP still seems the same, same size, same marking even amps watts...

  Puzzled?

  Looking for the wireless mouse software. Update and who might be your bet.

  Contact Compaq.

• When are you going to fix the Microsoft Wireless Mouse overheating Nano receiver?

  I bought one about a month ago Microsoft 4000 wireless mouse. Yesterday he is receiving died on me. I suspect the short-circuit. After some research, I realized that I was not alone with this problem, it could be a default of series.

  Once the question has appeared on the forum before (http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/727a8f10-4aaf-4f1e-bea1-3a73f7e62cf9) but the problem was quickly rejected.

  I bought the whole thing on a trip in Europe and cannot be replaced. So the question is: If we trust Microsoft for the second time and buy the same mouse again or opt for something else? I need a mouse that works on rough surfaces. But right now, I may need to overcome my taste for the device and opt for Logitech to anywhere, at least that you reassure me that you will have the transceiver replaced soon.

  Microsoft Wireless Mobile Mouse 4000

  Microsoft Replacement Tel: 800-933-4750.  Product ID = D5D-00001.  Have your mouse 4000 handy when you call.  They will need the product ID (PID) from the bottom.

  They will replace your for free .  Replacements carry a warranty of 3 years.  You must keep the PID of the original mouse for the replacement warranty.