When I plug my power supply laptop my wireless mouse doesn't work

Similar Questions

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• HP laptop: wireless mouse does not work

  After mobile update on oct 6th wireless mouse is not working.when I am looking for in the receiver 2.4 g device is here.

  I did a hard reset but it does not. The mouse is iball freego 2.4 g wireless optical mouse

  and even when I went to download a software to reinforce the msg me: "We have couldn't retrieve the list of drivers for your product." Help out me

  dhruvil28

  Hello;
  
  Let me welcome you on the HP forums!

  Sorry, but if your talk to get the mouse drivers from HP, what's not at work, such as HP does not include drivers for the hardware not HP.

  Have you tried to download the drivers from the manufacturer of the mouse?

  You must go to the settings, update & Security-> Windows Update.

  Then, choose Advanced-> history to see when the updates have been applied last. If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem. Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.

  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  If the appropriate device adapter is no longer present in the Device Manager, what MIGHT work is something known as a repair installation. It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.
  
  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

  Good luck

• My touchpad on my laptop and my mouse suddenly stop working.

  My touchpad on my laptop and my mouse suddenly stop working.  The cursor just sits there in the center of the screen.  Device Manager indicates that they are working.  I tried to remove the drivers and reinstall them without a bit of luck.   Help

  Hi Zippy,

  I suggest that you try to do a restore of the system, here a guide with Visual effects.
  See you soon ~

• AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

  Using Windows7 - I tried Windows10 but restored to 7.

  AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

  Help please...

  OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!

• TV not picking up the power supply laptop HDMI

  I have a HDMI cord to connect my laptop (Dell XPS M1530) to my Samsung LCD TV. I was already able to simply connect the two units together and my TV would automatically pick up my HDMI feed. However, it now seems that the AutoPlay feature does not work. Oddly enough, my computer makes a noise when I Plug and unplug the power cord into the laptop
  (as if its grateful I'm connected) but never sees my TV to pick up food. I checked the TV and it doesn't seem to be the problem.

  Try these steps in windows vista...

  1. go in Control Panel.

  2. click on hardware and sound.

  3. in the left pane, click on laptop.

  4. on the right, click Windows Mobility Center.

  5-the screen that appears, click CONNECT DISPLAY.

  6 then another pop up, click VIEW MY DESKTOP on all DISPLAYS (MIRRORED)

  then click on apply.

• Super Speed USB 3.0 Docking Station - no power supply laptop?

  Laptop is on and plugged in the docking station which is "powered".  Connection to the monitor / keyboard and mouse is fine, however I am surprised to see a less power - plug is soon message.  Docking station is not supposed to power the laptop?

  In fact, I think that what makes a docking station for a docking station, because it is a device that actually connects to a docking port. Thus the name docking station. A usb port isn't a docking port. A docking port is a single port that provides many pine so different protocols such as video, audio, usb, and Yes power etc. all have their own connections so that they can operate at their full potential. A docking port is not a conversion of many protocols for a usb signal, then try to cram two ways between the pins a lot less. And saw that all the "docking ports" as far as I know, have connectors to supply them, I do not see how Dell calling a port replicator a "floor" could confuse someone. I don't think whether a good faith error or another, simply tactical knaves in the marketing department to take advantage of what people believe to be a docking port so that they can make a nickel. Think that a wharf shipping, with access full power, fuel, water, sewer connections, the whole shebang. But rather a boat anchor so that you can anchor your boat to the coast, so take your time waiting on what ever ashore ship transport boats you can find the basket with a limited amount of resources via a limited method.

• Compaq 6710 b: my HP Compaq power on only when I plug in power. Don't turn on with the power button / stop!

  I have a laptop HP Compaq 6710 b... Its more than 6 years...

  The problem is really annoying... The laptop powers on only when I force taken into the spindle of the charger and the laptop works very well after that...
  But the laptop never turns on when I try to power by pressing the power button!
  I did not understand the reason why...

  Any thoughts on this problem?  Help!

  There are no settings in the BIOS that affect the use of the power button.

  The power button works at the level of the material (firmware).

  By pressing the button translates the action of the Commission of the conditions of the logic system.  There must be voltage at specific points in the power circuit. If the voltages are not present, then the power button does not work. This can be caused by a failure resistance, mlcc capacitor or a bad solder joint, if the power button has been tested and shown to work normally. Fluff even could cause this to happen. This can help out-performed by Visual inspection and using a multimeter.

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• When you disable the trackpad (cant use laptop computer mouse), if I add a wireless mouse, it still works?

  I have a hp 650 and I can't disable the mouse and trackpad on the laptop, but if I install a top wireless mouse and disable the trackpad while using the wireless mouse, wireless mouse still works? Thank you

  Thank you, and will be the laptop trackpad (once connected disabled and wireless, mouse), will be always off trackpad while mouse wireless can still be used? Thank you

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Wireless mouse does not work when it is docked.

  I have a new laptop Latitude E7440, with a mouse Dell Wireless and E-series docking station.  When it is docked, the wireless mouse is disabled.  Receiver must USB mouse be connected to the docking station to make it work? It would be quite embarrassing.

  Thank you

  live

  Hi dwells1957,

  Thanks for the post! Looks like you might have the USB receiver connected to the USB ports on the back of the system? While anchored feature transfers E7440 of ports at the back of the unit to the Wharf (by disabling these ports).

  Rear ports Latitude E7440 & E7240 system are disabled when it is docked on an E-port I / II or E-port Plus I / II

  http://www.Dell.com/support/article/us/en/04/SLN290782/en

  If you connect the USB receiver on the dock or on the USB port on the side of the system, it should work correctly when it is connected to the docking station.

  Kind regards

• When are you going to fix the Microsoft Wireless Mouse overheating Nano receiver?

  I bought one about a month ago Microsoft 4000 wireless mouse. Yesterday he is receiving died on me. I suspect the short-circuit. After some research, I realized that I was not alone with this problem, it could be a default of series.

  Once the question has appeared on the forum before (http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/727a8f10-4aaf-4f1e-bea1-3a73f7e62cf9) but the problem was quickly rejected.

  I bought the whole thing on a trip in Europe and cannot be replaced. So the question is: If we trust Microsoft for the second time and buy the same mouse again or opt for something else? I need a mouse that works on rough surfaces. But right now, I may need to overcome my taste for the device and opt for Logitech to anywhere, at least that you reassure me that you will have the transceiver replaced soon.

  Microsoft Wireless Mobile Mouse 4000

  Microsoft Replacement Tel: 800-933-4750.  Product ID = D5D-00001.  Have your mouse 4000 handy when you call.  They will need the product ID (PID) from the bottom.

  They will replace your for free .  Replacements carry a warranty of 3 years.  You must keep the PID of the original mouse for the replacement warranty.