When I print to my HP Laserjet 4000, the display shows the data received, but nothing happens

Similar Questions

• Every time I open Firefox I get the meesage from follopwing: it's recommended storngly you appl this update as soon as possible. When I have TRD to di, show he's trying to connect to the update server but nothing happens

  Everytime I open Firefox I get the following message: it is strongly recommended that you apply this update as soon as possible. When I try to do, is to show that it is trying to connect to the update server but nothing happens

  You are welcome

• I downloaded and installed the trial dwcs6, but nothing happens when I click on start application in the Adobe Application Manager

  I have Cs4 master collective suite on my windows vista machine, it says installation complete and it went through the whole download progress bar and bar installation but it won't start. This who can I try to do to fix?

  Thank you for responding. The problem was that I tried to launch the trial DWCS6 while I still had DWCS4 open. Apparently, who stopped the new version opened. It opened very well after I closed the CS4 c. and I was Lovin ' on the CS6 since. Thank you once again.

• LaserJet 2605dn initializes, then ready, then it says printing but nothing happens

  The 2605dn initializes, then going on loan, then when I try and print the configuration pages of the control panel placed in "printing" on the control panel but nothing happens.  It's there, watching staring into space.  Any ideas?  User manual no help and not able to find a service manual.

  All toner cartridges are HP authentic and rich.  We first got a message "replace supplies", but he himself deleted after checking the toner cartridges.  Nothing extraordinary happened previously, and there is no other error message either.

  Thank you

  Bah,... I suppose I should have been a little more patient, I came back from lunch and said well, okay, so, I reinstalled the direct stream, then reinstall the trainer, suppose one of the connections was loose, returned to the top, and now correctly displays the ink supply.  Perhaps "IJW" it was a problem of id-10-t.  "I need a holiday"...

  Thanks anyway...

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.

• I'm trying to set up the synchronization... pair a device and menu on home computer says sync now, but nothing happens when I press it. I have not yet entered code

  Cannot set synchronization because when I try to enter the code on the main computer to pair a device menu firefox Sync now displays but nothing happens when I click on this

  Maybe the button is hidden somewhere, please create a screenshot of the problem you see by following the guide mentioned in the How to make a screenshot of my problem?.

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . You really help us to visualize the problem.

• My macbook bettery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happened.

  My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.

  You can try another charger?

  Also-

   - Press the Option button and click it - system info - Power - post what is shown on the battery please

• I received a notice of "software update" (Firefox 10.0.2 update), but nothing happens when I click on "Update Firefox" - button

  I downloaded Firefox about 6 months ago, and since I was not able to make softwareupdates. I get pop up notice on updates available, but nothing happens when I click on the update Firefox button.

  Yes.

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• VI does not work properly when run at each full speed or highlight the run mode, but running at full speed after the starting and stopping of the execution mode games

  Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.

  The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?

  Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.

  Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.

  I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P

• My laptop suddenly stopped opening my Hotmail emails. I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email.

  My laptop suddenly stopped opening my Hotmail emails.  I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email.  The cursor will just highlight the particular word on what it is and do nothing.  As far as I know, nothing else was done on my computer.  This could be the cause?

  original title: cannot open emails.

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

   

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• When start the computer can be turned on but nothing happens

  Original title: computer does not start

  Hi all

  Have a dual processor Intel running Vista with 2 GB of memory.

  When start the computer can be turned on but nothing happens. That is the screen is not lighting, brief flashes KB on and nothing. I hae take the drive HARD case and implemented it is powered, but there is no sign that it is accessed at all when the machine is running. It seems that ot could be the HARD drive, but I think that there is a rom on the motherboard, which is accessible in the boot process and I wonder if this could fail. I don't have a spare drive to test what happens then is anyway I can be sure if I need new hard drive or m/Board?

  While on the question - if I need a HARD drive, Vista is the one that crashed and I do not have a Cd with the machine when I bought it. Nor has created a cover of one! I have an old XP Pro upgrade disc and an original copy of Windows 2000 (so I can switch to XP). This is my best option? I can't afford £ 140 for Windows 7.

  Hi Eddie,.

  Since this is a hardware problem, you should contact your computer manufacturer or a hardware technician to understand the defective material.

  And also, since Windows Vista was preinstalled on the computer you must consult the manufacturer of the computer for resettlement or a recovery DVD.  Also survey about data recovery on hard drive crashed.

• When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler.

  When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler. And the only way to resolve the pbobleme temporarily to stop temporarily the computer weighing on the button of the tower.

  Hi Louis,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• (Redirected) When you install the driver for the Touchpad Synaptic that nothing happens.

  Hey guys...

  I have a new laptop, Dell Inspiron 15-5888 5000 series. It's all great, but there's only 1 problem...

  The touchpad, it works correctly, but it has all of the features, such as scrolling, zooming, etc.

  When I go to Dell-> support, enter my Service Tag, go to drivers and downloads, keyboard, mouse, and other input devices, I can't find the listed Synaptic touchpad driver, I find that the so-called Unifying or something like that... I tried to download a synaptic driver compatible with Dell Inspiron 5558, downloaded and installed, but nothing happened after that, I looked on google and found that it is not a synaptic driver for my dell type, but there is something called Alps, I don't remember really what was it called, in any case I downloaded it, but also nothing happened... BTW, I have 10 windows, and in my previous laptop, I used to get outta windows update Synaptic touchpad driver, now it don't are no driver for synaptic in the drivers listed in windows update... any help guys?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening

  I am running Windows 7 and I have a batch file to copy files from 1 computer to another.  It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening.  None of the files are copied, and the control box does not appear.  Any ideas?

  Run a batch file in Task Scheduler

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  Configure your task under your administrator account.
  Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
  If the batch files write data, then the target for the task should ALSO have all explicit permissions.
  Now try to run the Task Scheduler task.

  Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
  http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe

  I hope that this information will help resolve your batch file does not problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think