Problems with secondary after building the application .exe

Similar Questions

• LabVIEW crashing when you build the application (exe)

  Hello

  I am building an application from a simple labview vi (2011). The vi is that sets (boolean = TRUE) a line on the digital output card (NI 9472) when I start to run the vi. The program works very well after that I coded it. But when I try to compile an exe (application) of this project, then labview hangs in the build process. Is this a known issue? Help, please. I enclose my vi alongwith this email

  Thank you

  I'm sorry to hear that gascars.  I downloaded your project and VI and have successfully built an executable in LabVIEW 2011 and 2012 of LabVIEW.  Can you please send me a screenshot of the error you receive?  Also, can you make a simple VI that adds two numbers and see if that can be transformed into a .exe.

  Thank you

  Chris

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil

• Problems with iphone6 after downloading the iOS 10.0.1

  I was wondering how to solve the problem of the position of dramatic impoverishment battery install iOS 10.0.1? Called support and they do not know how to fix it. Basically battery comes out from 100 less than 20% in less than an hour and it started happening after installing 10.0.1

  It may be a 3rd party app which is not yet compatible with iOS 10. Have you checked your battery use to see what app is to eat your battery? Settings > battery

• Anyone having problems with crashes after setting the units (lb/po2) on an indicator on the dipstick?

  I use an indicator of money gauge to show pressure. With no set of units, everything seems to work properly. When I set units 'psi' and immediately try to save LabView hangs and crashes immediately after each next attempt to open the file project or VI. I'm using LabView 2012 (12.0f3) 64-bit on Windows 8. It is the first crash, I had. Unfortunately, it seems that the file is corrupted and I lost a few hours of work. Now I'm afraid to continue using this VI of fear he crash of something else and corrupt the file and I'll lose my progress. Any help would be greatly appreciated. I presented the crash to the settlement report, but who knows how long it takes to move to study the problem.

  Hi Arcus,

  If you search the forum you will find a large number of "moaning" on the buggy and incomplete unit support in LabVIEW. My favorite is the square function (available from LV2009?) which will follow "4 m" when you want as the square of "2 m". Of course: meter ^ 2 is always meter. And we're just talking a very basic unit...

  

  You will also find on the controls of the money bug reports.

  Combine all these threads in your own conclusions!

  I don't use controls of the money, and usually I stay away by using units of our days...

  BTW: I would also stay away from units such as "psi". Just my continental Europe perspective

  (Once I got to work with a machine (treatment of semiconductors) produced in the United States. She had 4 gauges next to each other using 3 different units: lb/po2, inHg, Torr. There must be a reason to do it, but have you ever needed to compare these pressures? Easy to remember these conversions...)

• Problem with redirect after save the wav file

  I have a photo booth / audio that we created with flash that take a photo and record then it records audio testimony and records it.  My problem is that, once the wav file is saved, I want to redirect them to a thank you page but can't seem to find a way to do it.  Here is the code that I use to manage the registration of the wav file.

  private void recordComplete(e:Event):void

  {

  var request: URLRequest = new URLRequest ("save - file.php '");

  var loader: URLLoader = new URLLoader();

  request.contentType = ' application/octet-stream ";

  Request.Method = URLRequestMethod.POST;

  Request.Data = recorder.output;

  Loader.Load (request);

  navigateToURL (new URLRequest (redirectPath), "_self")

  }

  I tried to add the navigateToURL at the end and it sends to this page correctly, but the wav file is not saved.  I was wondering if there was a way to determine that the file is saved and then redirect to a thank you page?

  Thanks in advance!

  -justin

  replace

  public var redirectPath:String = "http://localhost/thankyou.html";

  with

  not sure that this should be public but it won't matter for testing.

  public var redirectPath:String = "http://www.adobe.com";

• Problem with vi after changing the size of the window

  Hello

  I am very frustrated to change the appearance of the window properties for vi. Now I see all my controls front panel and I don't know what I did wrong.

  Is it possible to find my original vi?

  Thank you

  Could you give some more details on precisely what it was that you did to change the appearance of the front panel of your VI and how your façade is now different?

  I assume that you have changed the property of 'Appearance of the window' settings back to what they were originally, right?

• Problem with Photoshop after buying the creative cloud for teams for 1 year

  Hello

  I just Creative Cloud teams (one year subscription) (Mac/Win, several languages) and updated my photoshop, but when I go to open it, it asks me a liscence number.  Where can I find that?

  
  

  Refer to this:

  Connect you or activation errors

  Mylenium

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• No icon after installing the application

  I'm back in coding after a VERY long time (over 12 years) and am myself easing with HTML5 for the Playbook development. I managed to put together a very simple little app, especially as a test of the procedure for packaging and submission... and maybe get a free Playbook for my wife who covets my 64 GB baby!

  Anyway, had everthing packaged and signed using ripple (an excellent program once I worked out how to use it) and he expelled.

  Last night I got a reply that it had been rejected because "no icon after installing the application.

  When I sent the thing to Blackberry I included two .png files, which was to be used as an icon, but I think I was also to include in the compressed... am I right in thinking, I should have added a line of code in the XML file to set this?

  I feel like a total * beep *... like the time where I got a test paper in college without putting my name on it!

  Welcome to BlackBerry WebWorks development!

  Yes, you provide your name and the home screen icon in the file config.xml WebWorks.

  Here is an example of a config.xml file:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/code_sample_creating_a_bb_widg...

  Here's a guide for each of the items in this file.

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/working_with_config_xml_file_1...

  Also, for your interest, check out some examples of existing applications published on github:

  https://github.com/BlackBerry/WebWorks-samples

• the application needs to restart after removing the application due to .png files.

  When images are imported under res/img /, the application needs to restart after removing the application.

  Even the functions related bitmap are invalidated, the application should always reboot after removing the application.

  recordPic private bitmap is Bitmap.getBitmapResource ("Record-Normal - 1.png");.
  stopPic private bitmap is Bitmap.getBitmapResource ("Player-Stop - 1.png");.
  infoPic private bitmap is Bitmap.getBitmapResource ("Info - 1.png");.
  setupPic private bitmap is Bitmap.getBitmapResource ("setup - 1.png");.
  private bitmap exitPic is Bitmap.getBitmapResource ("exit - 1.png");.
  calibPic private bitmap is Bitmap.getBitmapResource ("calibrate - 1.png");.

  The png files are under 24 KB.

  Does anyone know what is the problem?

  Thank you for your attention,

  After the resolution of the image to 14KO downgrade, the problem is solved.