When I run chkdsk on C: to start all that I get is a black screen.

Similar Questions

• cannot re start my system by getting only a black screen with recovery of window failure

  original title: do not re start

  I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
  Myrna

  Hi myrnaspiers,

   

  1. What is the exact error you get when you try to start windows.

  2. what type of installation you have done, it's a custom Setup or an upgrade.

  3. check if you have the option to go back to the old version of windows.

  I suggest you follow the link to black screen when I start Windows 7 below.

   

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

  I also suggest you start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• How can I get full screen when you run qbasic on Windows 7 starter?

  When I run Qbasic (Version 1.1) with Windows 95, I get a view full-screen. When I run Qbasic (Version 1.1) with Window 7 Starter I get a partial screen display. How can I get a display full screen when running Qbasic (Version 1.1) using Windows 7 Starter?

  Hello Joseph,.

  Sorry for the late reply. It seems that you cannot run Qbasic (Version 1.1) on your computer in Windows 7.

  You can uninstall the program and install it in compatibility mode. Here's how:

  1. Right-click on the configuration file (program).
  2. Go to Properties. Click on the compatibility tab.
  3. Place a check on the option run this program in compatibility mode for and in the drop-down list, choose the operating system on which it was working fine.
  4. Place a check on run as administrator under the level of privileges and click on apply , then OK.
  5. Now, double-click the setup file to start the installation.

  Do not respond if you have more related questions. We will be happy to help you. Thank you.

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges.

  I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges. You have to invoke this utility in elevated mode.

  How can I fix it?

  Hello

  1. what prompted to run chkdsk on your computer?

  To work with this problem, refer to these methods.

  Method 1:

  I suggest that you disable the antivirus software temporarily and try to run chkdsk on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can check disk errors using the command-line of the system recovery options in Windows 7.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  To open the System Recovery Options, see the section: to open the menu system on your computer Recovery Options
  

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check if it helps.

• When I start my computer I get a window (black) called cmd.exe.

  I have Windows 8.1.  When I start my computer I get a window (black) called cmd.exe.  It disappears eventually when the computer loads completely.  But, how can I get rid of the window cmd on startup?

  John Alderman

  Press Ctrl-Shift-Escape and go to the Startup tab to view all the things that load at startup. One of those who is going to be the cause of this view occurs. Sometimes it's easy to sort by name, it sometimes takes a few tests to know who is who.

• Computer does not start, all I get is a black screen

  I use family Vista premium and everything worked right up until the other day. My computer froze and I stopped it to restart. After the reboot, it gave me the ability to start windows normally or in safe mode. I selected at startup of windows. After that, I got was a black screen. The computer is still running, I can hear the fans and the ligts are on.

  I have been looking for a solution to this problem and would really like to fix it myself. I tried all the options menu-f, but all I get is the black screen. Vista came pre installed on my computer, so I don't have the cd/dvd of Vista.

  Please help me if you can.

  Hello

  May I ask what computer do you have?
  Why you n t post this important information?

  You can start in safe mode? Maybe a driver or a virus has something confused upward in the Windows registry and the computer can start t more correctly.

  In the worst case, you must reinstall Windows using Toshiba recovery disc. :(

• At the start of the laptop goes to a black screen and says invalid partition.

  Original title: can I PRO 1-2cpu (IBM Laptop) Xp.

  • Not long I Formated my Windows XP PRO 1-2cpu, thinking that he would have run faster, not a blue screen crash and eliminate any viruses that could in fact, now that its formatted I can't use, whenever I start the laptop it goes to a black screen and says invalid partition, I don't know what that means though.

    so my question is there a way I can restore the computer back to normal? However, I don't have a recovery disk.

  A lot depends on how reformat you your hard drive.  Most manufacturers have a recovery partition on the hard drive that can be used to reinstall the operating system. Access you this by pressing a button that appears briefly at the beginning of the boot process.  If you have reformatted the drive c: partition only you might be OK and can get by using this recovery partition.  Otherwise, if you reformatted all the hard drive, then your only alternative is to get a Windows installation CD, boot from this CD and reinstall Windows.   Contact your computer manufacturer for advice.

  HTH,
  JW

• My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.

  My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.  I can not get to the windows screen, cannot get in safe mode, only the BIOS screen. I managed to get the Samsung recovery screen once, but he said that he did not find the repair disc in! Help, please?

  It is possible that your hard drive is damaged. You can download Windows recovery disk (if you haven't) and run Startup Repair this one.

• When I try to open an all new video I get is a black screen, how can I fix this to see the video

  When I try to open any video feature posted on my comcast home page all I get is a black screen. the same thing when I try to open
  videos in my message. I can't even open a training video.
  How can I solve this problem.
  Thank you for your help.
  Y_Brown

  This does not happen on my computers.  Try to download Firefox from http://www.mozilla.org and see if that makes a difference.  I also recommend the safe boot and checking the virus.  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Good luck.

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• When I try to open my RAW files all that I see is a yellow frame.  Win 10, PS cc [was: RAW files?]

  I have 10 windows and also use PS CC.  When I try to open my RAW files all that I see is a yellow frame.  I tried everything I can think of.  What can I do to see my files in RAW?

  Disable the GPU in ACR.  The check box use graphics acceleration is on a new Performance section in ACR preferences (Ctrl-K w / in ACR).

• I downloaded the application, and all I get is a black screen. It will not start. What's wrong?

  I downloaded the application, and all I get is a black screen. It will not start what is wrong?

  Sign-in black screen | Creative cloud desktop application

• I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand wh

  I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand what is happening? We put it on automatic renewal so I know it's not that we have not renewed this subscription, because we pay automatically.

  Hi olivias,.

  Looks like there may be some confusion on your system which application should be associated with PDF files. You can reset the file name associations by following the steps described in these articles (depending on your operating system):

  How to change the default application for a file type. Macworld

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  Please let us know if you have any additional questions.

  Best,

  Sara

• When I open Photoshop CS4 all I get is a black screen with photos

  I can't get the pictures to open in CS4, all I get is a black screen.

  I have Vista Business operating system.

  I install the admin, I have video gforce3, ops Windows Vista Business card.

  1.67 GHz Intel Core 2 Duo
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached

  2046 megabytes installed memory

  You need to update Photoshopto to version 11.0.1.

  What is the exact model number and manufacturer of the video card? Have you checked for drivers updated on their website?

  If you have done all that, see if the problem goes away when you turn off OpenGL in PS preferences.