E HP 5510
MY HP PHOTOSMART POSTER PRINTER FAILURE 0xc19a0035 there is a problem with the printer or ink system. whenever I turn it on. Please help me
I would look at this document here. She meets alphanumeric codes in your printer model. Once you select the appropriate to the low choice menu to determine if not your code includes the words 'ink system failure', it will guide you through the troubleshooting steps that will attempt to correct the alphanumeric error code that you get on your printer. If you reach the end of the document and get to the solution called 'Printing Service', sought to replace the product.
If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call. Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082
I hope this helps.
Tags: HP Printers
I have a photosmart 5510 which do not print black. All other colors are OK. Have changed cartridge and went through all the steps on the site of diagnosis without success.
I really need to turn it on. Any ideas gratefully received.
See you soon.
Here is a link that can help you with this problem. It can a be a print head.
Just bought the 5510 all-in-one PC world.
1. I can print it, but no (or little) black ink. I swapped the cartridges (in which case one provided in the box was a dud) but the same thing happens. No impression, or very light gray.
2. I can print an alignment page, but the analysis fails, no suggestion of how to solve the problems, if alignment is dead in the water
I lived all the troubleshooting onboard and used the mac based system to solve problems too.
(With no black ink), I can print from iphone or mac.
Please help if you can.
Hold button power for 20 seconds and then turn off the machine, then hold for 20 seconds then turn on the machine and this machine is turned on, press and hold the power button for three seconds following. This piece of lunatic of advice was given to me by the support. It worked. Which is lucky for them. Apparently not a ridiculous idea.
Photosmart HP 5510 will be not printed black before and after you installed the new cartridge. The specified controls did.
Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
If this does not resolve your problem, you may need to replace the print head.
Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
Let me know if this can help, thank you.
When I press "scan" on my printer, it is said that I don't have the software for it. I've looked everywhere for the software... What should I do?
The only thing you can do with mountain on the Officejet 5510 Lion is to ensure that you have run the Apple software updates with your printer plugged in with the USB cable. That you will get the latest version of the HP software that you can run on Mountain Lion.
To make the update Apple properly follow the steps below:
Step 1. Plug in the printer power cord TO the computer and the printer
Step 2. Click on the 'Apple' in the upper left corner
Step 3. Click "Software updates"
Once it's over you can check the HP support document How to Scan: OS X v10.8. This document will provide you with instructions how you can scan with the preview of Apple, Apple Image Capture and Print & Scan. If it is at all possible for you to scan it is how you will be able to do.
I hope that answers your question about scanning. Thanks for posting on the HP Forums. Have a great day!
I have never posted on a forum before, but I'm about to have a magma down! I try to print my wedding invitation. they are a custom size of 19.7x13.9 cm., I tried to add the custom paper size by following the instructions on the other posts, but this has not worked. paper/output is missing from the advanced settings.
help would be greatly appreciated because I alsways bought of HP printers, but if I have to buy a new one for that I won't buy HP I'm worried sick have the same problem.
Thanks in advance
Welcome to the HP Forums!
I see you are trying to print on paper 19.7 x 13.9 cm with your printer HP Photosmart 5510, on Windows 7. And I'm happy to help you!
According to the specifications of the printer, it is not a supported paper size. The paper sizes supported for this printer are:Type of paper
I have a note samsung galaxy Tablet 10.1... I'm having problems trying to use it to print on my print Photosmart HP 5510 E in a printer... can anyone help please. Samsung was not very useful.
Please use the following applications:
My 5510 print not black like everybody else. I tried everything-new cartridges, cleaning and try to align the print heads, etc., nothing helped. It is out of warranty.
Could someone send me the reset instructions "secret"? At this point, I don't care if I have the damage because I know I have to go out and buy a new printer, but I want to make a last ditch effort.
Thanks for getting back to me. A reset does not solve the problem; However, I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.
Several pages on a chromebook scanning is not possible, it seems. I use webscan but installation that only allows you to save a page at a time. I then use PDF love to combine the files, and although it works well there must be an easier way. Is there another brand or model All In ONE that will make a go?
Welcome to the Forums of HP Support!
I see that you are looking for a more easy why scan multiple page. PDF with the 5510 and a Chromebook. The way you do it is the best, because the Chromebook isn't any software which can be installed for the printer. Here I had a way, but if you find one, let me know.
I have a HP 5510 printer and that you are unable to print from my ipad. It will print from my laptop, but not from the ipad. Any suggestions?
Cordially in forecasting.... MW
First of all, please check your printer with this list:
If SO, it's here, so please check using this:
How can I return my page Wizard HP printer for all-in-one printer, HP Photosmart 5510? I used to have, but now all I get is a page that has only three choices: see what's printing, set the preferences and customize your printer. I need the Printer Wizard page that has one of the following options: ePrint Setup, customize your printer, see what's printing, maintain your printer, set preferences, scan a Document or picture, manage scan to printer and printer Home Page. Can you get it someone please let me know how I can return the Printer Wizard page? Thank you, in advance!
The simplest solution would be to reinstall the software of full functionality for the printer.
The last phase of installation should fix your printer wizard.
General instructions to install the printer software
- Open downloads & drivers HP
- Enter your printer model information
- Select your printer in the list of the 'results '.
- Enter your operating system from the menu drop-down
- Click NEXT and scroll down
- Find the category driver - software product installation
- Select the base driver, e-print, or a full features software
- Save the *.exe installation package (s) on your computer
The files will probably save in the "folder"downloads. "
- If it is available, you can download print and scan doctor and / or other programs of the category-utilities
Install the utilities / tools first. bit installation packages are smaller in size
- If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.
· On the bottom half of the main Web page for your printer, you can find some helpful videos to help with the installation of the printer software!
· Scroll down the list of videos back until you find the video that best fits your situation.
- If you use a USB connection: download and install the driver software before connecting a USB cable.
- Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish). Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.
- Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated
There is valuable information about the Web site, including manuals, pages, solving problems, and SOLUTIONS to problems, How-to's and alerts for your printer. Be sure to take a comprehensive look at what's available. To bookmark the page.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Click on the thumbs-up Bravo !
It's a nice way of saying 'Thank you' for help.
While I strive to reflect best practices of HP, I do not work for HP.
After almost two years, scan has stopped working on my 5510, although the printing and copying are still functioning. Here are the facts:
I run Windows 7 on my laptop. I'm connected wireless to the 5510.
I get a message that the search was unsuccessful, when I run the printer. But the printer can see the computer and is not a problem when I choose it. When I run the scan, it sits there for a while (no movement), then gives me the failure message.
I can't get the scan to work at all from the laptop itself. When I click on scan a Document or a picture, nothing happens. To be honest, I never tried this feature before, so I can't say if this is something new, or if it was always a problem.
I run printing and scanning doctor and he made three sweeps of test where the printer indicates that they were successful (the printer makes noises like he did a scan). But no scan file doesn't appear on my computer (in My Documents, where they normally appear). When it's done, he asks if I want to run a test scan. I say I do, and it seems to say that the analysis has been a success. This time the printer makes no noise, but I immediately get a message parsing succeeded, and I threw at the final menu.
I hope someone can help me!
I suggest you to uninstall the printer software.
Restart the PC.
Please, download and run the Installer printer HP www.hp.com/go/tools
Hi guys, really need your help. Ive have lost my cd for my HP photosmart 5510 series. Ive been on the HP website and tried to download for windows 8 32-bit, but when it downloads n I click it, it says: "this computer can't run this application. Ive got a netbook Acer Aspire to v5.
I appreciate that very much.
Is that what you downloaded the driver package? http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-3/PS5510_1315.exe
I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again? Thank you for your help, Sue
My Photosmart 5510 off-warranty will not be printed in black and color blocks on the test page are weak and upholstered. I have responded to customer cleaning tips with no improvement. Not enough messages about the problem detail advise to proceed. What to do next?Greetings @HLDLC,
I have a Photosmart HP 5510 e-All-in-one printer - B111a. I am running Mac OSX 10.8.5, running a Macbook pro mid 2012 15 inches. I am able to run Windows 8, but have not tried. I threw the magenta, cyan and yellow. I bought a new black toner cartridge. My printer does not print unless I have the magena, cyan and yellow installed. Is it possible to spend it?
No, the cartridges must be present. In addition, if the printer is allowed to sit for a long time with the cartridges removed the "plumbing" may become permanently blocked.
Maybe you are looking for
I have a wildcard SSL certificate used to secure a live and test the site. With a code similar to the test site show in Firefox (Version 38.0.5 Windows), but the online site are not displayed and replaces the page with:"Secure connection failed". An
the symbol on the startup, which you click to go to the website suddenly disappeared and I can't understand how to recover the symbol. Thanks for any help
Router Belkin N750 dual-band. For some reason, my laptop can't see 5 GHz signal. I looked at the options of wifi card, but could not get the 5 GHz network to appear in my list of available networks. Any ideas? Its SSID is broadcast. N mode is ena
Digital Camera RAW Compatibility Update 6.18 has been installed almost every day (for the last month) since I upgraded to OS EL Capitan. Why should it be duplicated?
Whenever I put a CD in my CD drive, I heard the "rurr" that usually accompanies the normal sound of the hard drive working group work. But lately, it makes this noise, but does not read the CD at all either. I searched the download and support alread