When I stop the noise still continues

When I stop the noise still continues. When I test the movie in the timeline and use the chronology does not break the sound with the image, it continues up to the stop, the problem is that I have very long sounds and he plays to the end.

I'm guessing that the sound is embedded in the timeline panel. If this is the case, select the keyframe where the sound starts and then in the Properties window, set the property of synchronization for the sound selected 'Stream '.

Tags: Adobe Animate

Similar Questions

  • YouTube audio plays double in a tab and we always play when I stop the video

    I play Youtube videos, play audio even twice with slightly delayed in the meantime. If I stop the video play continues. I don't know about this problem.

    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
    • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    Thank you.

  • Search tool crashes Windows Explorer when I stop the search

    My XP search tool (the one with the little dog) goes on and during the search, and if I found what I need I stop searching and getting back to work.  I could do in W2K, but in XP - SP3 when I stop the search, Windows Explorer crashes.  So, I have to restart my XP.  Y at - it a fix for this, or do I have to use another search tool?

    My XP search tool (the one with the little dog) goes on and during the search, and if I found what I need I stop searching and getting back to work.  I could do in W2K, but in XP - SP3 when I stop the search, Windows Explorer crashes.  So, I have to restart my XP.  Y at - it a fix for this, or do I have to use another search tool?

    I have this problem on my own XP machines and have seen several times on client computers. I think it's one that Microsoft will have to work, because I can not find a solution.  It seems to be the installation of third party software that does this, because a stock installation of XP with all updates to this day doesn't seem to have this problem.

    YOU DO NOT HAVE TO RESTART WINDOWS TO RECOVER FROM THIS.

    If Explorer crashes and your icons and the taskbar disappear, the solution is simply to wait for Explorer itself to begin again, or issue a ctrl-alt-delete, start Task Manager, click on file-> new task (run)-> and then enter "Explorer" (without the quotes) and click 'OK '. The icons and the taskbar will be back and XP will then operate normally.

    If some of the icons in the system tray are missing after Explorer restarts, you can quickly sign out and then sign back in to fix this problem, after you saved all work and close programs. The programs represented by missing icons are, in this case, which is still running, so it's only a cosmetic problem.

    Until Microsoft or someone else found a real solution, you may need to reinstall XP to resolve this problem. Not knowing the real cause, this problem could happen again. Not all facilities have this problem, or is it all the time.

  • How stop the noise annoying to add to creative cloud that opens every time I startup CS6 PS?

    How stop the noise annoying to add to creative cloud that opens every time I startup CS6 PS?

    Sometimes the CS6 will go into trial mode, and here comes the announcement of the CC.

    You click on this software license, sign in using your Adobe ID and when it asks for your serial number, enter it.

    Which will bring things back to normal and get rid of the announcement of the CC.

  • I bought the CC student & Teacher Edition. but when I install the applications still are trail version...

    Hello

    I have a question:

    I bought the CC student & Teacher Edition. but when I install the applications still are trail version...
    Is there something that I did?


    Thank you

    John.

    In addition, you can see this link:

    https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  • whenever I click on the link for creative cloud, it takes me to the download page. Even when I reenstall, the link still tackes just me draft.exe page. Can it be planned.

    I have an account that I have lightroom & camera shop. I used all 3 for more than a year. But now.every when I click on the link for creative cloud, it takes me to the download page. Even when I reinstall, the link still takes me right to the download page. This can be corrected.

    I fixed it by removing all the programs. Then I have them re-installed

  • Error message: "Preparation set up windows, do not turn off your computer" when to stop the system.

    Original title: closure of the problem

    Almost everytime I turn off my laptop, I get the message ' Preparation set up windows, do not turn off your computer . Then it takes forever to finally stop. Suggestions for this problem?.

    Hi ArthurCosford,

    This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system.

    Step 1:

    You can check the windows updates history to discover updates recently and failed to install.

    For more information, you can consult the following article:

    See the Windows updates are installed

    Step 2:

    If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

    a. to download updates from the Microsoft Download Center

    b. Enter the item number in the field search and download the same.

    c. double-click on the downloaded file.

    d. click on run and follow the wizard to install it.

    Hope this information is useful.

  • Problem to stop the task of continuous using API C DAQMx data acquisition

    I'm doing the acquisition of data in the PCIe-6536 continuously using DAQMx C API. But whenever I try to erase the task and put end to my application, program stops and it is not completed by the Task Manager and task killer applications. Can someone help me with this?

    Sameer

    Hi John,.

    Thank you for your concerns. the example attached also created the same problem. Then I run the test of the device to the MAX and it failed. Then I realized that there is something wrong with the installation. I simply uninstalled the card and installed on the other PCI-e slot. This time, self test has been successful and so did my request.

    So my problem has been resolved

    Again thank you for your quick response.

    Sameer

  • When I stopped the computer there are updates for Vista

    Original title:

    Vista updates

    For the last two weeks, every night when I stop there are updates for Vista. What gives?

    Please see the article after some troubleshooting for your question:

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339/en-us>

    In addition, you can read the following article and check.

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

    http://support.Microsoft.com/kb/906602>

    UTC/GMT is 18:13 on Monday, May 21, 2012

  • Smartphones blackBerry how to stop the noise?

    Just got my first blackberry!  When I use the rollerball, it makes a noise.  How do cut you noise?  Any help is appreciated!

    Thank you!

  • Best practices for p2v - when to stop the physical machine?

    After you perform a p2v conversion, when should I stop the physical machine? By default, the virtual machine is turned off after the conversion and characterized by a DHCP address and not the static address that was on the physical machine... Why is this? Not the virtual machine is a duplicate... maybe it's a setting I'm missing the conversion.

    Looking for a better practice for the p2v conversion process.

    Using Virtual Center 2.5 and the converter built-in.

    Thank you, Rick

    Hello and welcome to the forums.

    I tend to do the conversion and to choose to not to turn on the virtual machine later.  Once the conversion is completed, I make changes on the hardware as needed and then make sure that "Connect at Power On" is not checked in the device status of the NICs.  Now you can power up to the virtual machine and do what you need to do to prepare (uninstall the old software, change HALs, etc.) without fear of being on the network with the same name or IP address.  Once everything is good in Event Viewer, Device Manager, etc. - I shut down the physical server and then turn on the virtual machine with a "wired" network adapter to test.

    Another option would be to use the "Customize the identity of the virtual machine" option towards the end of the wizard import, if you need to be able to have the physical server and the virtual machine on the network at the same time.  This customization will give you virtual machine, a new name server and SID, and then you could just set it to a different IP address.

    Good luck!

  • Chess game, how to stop the project to continue

    If the user fails the test that I don't want them to be able to do b/c for those who have passed, I have created a certificate. I have my settings of the quiz in the success or failure "If the passage of rank"-go to the next slide. "If the quality defect:-send email to... on the drop down menu continue it play the project is not checked." But when I tested it out, he continues to play the project when the user fails. Should I set the Action if I fail the Action No.? Other solutions?

    ashorsley,

    One thing you can do is set such as if the user fails the test, then he jumps to a slide that you created.  The blade can simply say "Thank you" or 'Sorry, you do not pass' and include additional instructions the learner might need.  Say what you want.  Whatever it is, then set your project options to close the program.  So, it looks like this:

    For example:

    Slide 26: last question slide in the quiz properties: at the exit of the slide: go to the next slide

    Slide 27: Results of the quiz slide properties: at the exit of the slide: go to the next slide

    Slide 28: ' congratulations, you passed. "          Properties: At the exit of the slide: go to slide 30

    Slide 29: 'sorry, you do not pass."               Properties: At the exit of the slide: go to slide 30

    Slide 30: thank you very much.                                   Properties: At the exit of the slide: no action

    In preferences/Quiz/publish/success or failure, set the following parameters:

    If the passage of rank: go to the slide 28

    If lack of rank: go to the slide 29

    Publish/preferences/project/start and end, set the following parameters:

    Project end options: Action: close project

    Who should do if I understand your problem.  It worked for me.

    WARNING: In settings/preferences/publication/Quiz if you set must pass required - the user must pass this questionnaire to continue, then this solution will not work.  Assign the necessary - the user must take this questionnaire to continue, then it should work fine.

    Good luck.  Let us know how it works.  Any other questions, feel free to ask.

    Take care

    Jorge G.

  • The sound stops when I stop the timeline.

    If I start the animation from the start, the sound will be played. But, when I put in pause and click on replay, the sound stops.  I have to run it to the beginning to get the sound to play again.  I'm trying to animate a video to the beat of a song and it is very difficult to do that when I have to run it to the beginning each time to hear all the sounds.  What should I do to fix this?  Can it be fixed?

    Select sound in the scenario and in properties, change its synchronization to be stream instead of the event. If you find that the flow is grayed out, it means that you are using HTML5 Canvas, which does not support that.

    If you the last animation should be HTML5, then continue to use an ActionScript 3 FLA to set up the synchronization of sound to the animation and then either convert that into HTML5 Canvas, or copy and paste layers in a Florida HTML5 Canvas

    You are likely to encounter synchronization problems if you play a demanding animation as HTML5 on a slower device.

  • HP685 ink cartridge - HP when to stop the production of ink

    I wonder when HP would cease cartridge HP 685 of the products? My Deskjet Ink Advantage 5525 would become unnecessary if HP continues to make the ink cartridges HP 685 for it!

    BTW, if that really occur, is there a way I can use future ink for this printer cartridges (for example, in the next...) 5 years?)

    If that were to happen, you can always contact the HP Support (1800-474-6836) to get the right cartridge.

    It is not certain that (over the next 5 years), it will be a replacement cartridge, but it may be a work around.

  • If my creative cloud is being canceled, how can I stop the cancellation and continue my payments?

    Hi everyone I am trying to figure out how I can stop a cancellation on my creative cloud account and continue with my payments, but I can't understand it alone. Can someone help me?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

Maybe you are looking for