WHEN I TRY AND BURN A CD NOTHING SE PAST
I THINK THAT A PILOT COULD BE DISABLED BUT CANNOT FIND A WAY TO START
Hello
Try the microsoft 'fix - it' for your problem below
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
and read this information too
http://support.Microsoft.com/kb/982116/en-us
Tags: Windows
Similar Questions
-
8FFD020E and C00D11AB when you try to burn CDs
original title: 8FFD020E and C00D11AB
This error prevents appear when you try to burn CDs. Have tried all of the suggestions. This is a very common errror, a lot of people on the Internet asking about it! I managed to burn a couple of week last CD, after the publication of this error. Now, does not burn yet. This should be fixed! What is the solution?
Hello
Method 1:
You can run the fix - it from the following link.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2:
You can read the following article.
How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
http://support.Microsoft.com/kb/324129See also:
How to copy information to a CD in Windows XP
http://support.Microsoft.com/kb/306524
How to troubleshoot Audio CD creation in Windows Media for Windows XP player
http://support.Microsoft.com/kb/306319 -
"Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R. Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something? Windows XP computer bought from Dell about 4-5 years (Dell 5150). He let me play commercial CD, burn CDs and burn data on CD - r. He no longer do anything with a DVD-R disc, wont even recognize one, please help
Hi malikchebli,
See the below Microsoft article and try the steps mentioned, check if it helps.
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
-
I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player. I have the DVD/RW internal drive and external DVD/RW as a player. I use them mainly to copy music files and it has always worked fine until yesterday.
When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive). Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.
Is it something that needs to be reset or changed?
In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.
-
I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover
http://www.Nero.com/enu/tools-utilities.html
Uninstalling a Nero product did not work properly?
Use Nero General CleanTool to delete all remaining Nero entries from your system.Read the above info.
See you soon.
Mick Murphy - Microsoft partner
-
I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?
Hey paulc6148125,
Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.
Kind regards
Nicos
-
ntdll.dll error message when you try to burn DVDs
Help please. I use Magix Movie Edit Pro 2014 and when you try to burn on a DVD I get the following error message:
I've uninstalled and reinstalled the software nothing is done and cannot figure out how to solve this problem. I use Windows 7.
Hello
You must contact the support for developers of this product.
Concerning
-
Satellite L500-19 X - code error when you try to burn on DVD
Error code: 380381-26 - 2A 037303 when you try to burn to DVD.
Can anyone help?
Hello
What program you use for burning discs?
What operating system is installed?
What kind of blank DVDs you are using?To be honest, I can t say something about it and description of a sentence is too short in this case.
I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.
-
I use FCX. I saved my video in a file and I am trying to burn on a dvd.
It is recorded in 16 / 9, but when I try to burn using idvd turns into 4:3. What I am doing wrong?
But a better question is what can I do to stop this? Thank you.
If you export 1920 x 1080 or 1280 X 720 square pixels and the iDVD project is set to widescreen 16 X 9, it must encode and display correctly. However, iDVD does not translate the anamorphic (e.g. 1440 x 1080) formats well. So, if your project FCP HDV (or DVCPRO HD), export it to the CPF in format Pro ResMaster and bringing in iDVD.
Russ
-
Original title: I can not burn CD
I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?
Hello
1. have you tried using different CD and check?
2. were you able to burn CDs without any problem earlier?
3. have you made changes on the computer before this problem?The hotfix in the following article might help you.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/ -
"An error occurred" appears when you try to burn a CD
After ordering the Windows Media Player 11 to START to BURN, a red circle with an X appears immediately to the bottom of the list of the songs selected for burning (in the title, in the middle of the main column). CD were burned on this same burner, but I did not burn in about three months. Any suggestions?
Hello
· Do you have any third party burners installed on the system?
· What is the exact error you get when you try to burn the CD?
· You are able to use the CD drive for playback of the disc?
I suggest you to try with another CD and check if you're able to burn or not.
I suggest you run the fix it is present in the article below.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Apart from that, I suggest you follow the steps mentioned in the article below.
How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
http://support.Microsoft.com/kb/324129
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
'Burning disc error' when you try to burn a DVD
Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?
I have a computer laptop advent 9117.
Hi Adam,.
What is the full and exact error message?
I suggest you to refer to the article and see if it helps:
Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."
http://support.Microsoft.com/kb/934544
Let us know if it helps.
-
When you try to burn a television program recorded on a dvd, I get the error above "sbe server has stopped working" Windows media, then stops and restarts. I tried a clean restart, a restoration of the system, a check disk to dvd etc and all come out ok. Help! can I reinstall all windows Media center?
Hello
How long have you received this error message?
Was there anything added/removed before it began?
Try this:
In the control panel/uninstall a program.
"Turn on or off Windows features.
* Disable media features
* Reset
* Re-enable media features
Reset
Eddie.b -
Error: 'search Active Captions' when you try to burn the data file on a CD
original title: burn a data file on a CD
When I try to burn a cd, that a window pops up that says search active legends. I am trying to record a data file, no pictures. Help, please.
I solved the problem. It seems that this was a program I had called Photo tags Express. I uninstalled the program and the window 'search Active Captions' went. Hope this helps someone else.
-
Windows Media Player 11 says disc not empty when you try to burn
When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc. Sometimes, it will finally work after multiple attempts; sometimes not!
Hi doodle75,
You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?
If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.
To resolve this problem, save the data to a new CD - R or CD - RW.
Reference:
You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11
http://support.Microsoft.com/kb/930370
Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".
http://support.Microsoft.com/kb/927814
Please see the link below for more information
Burn a CD or DVD in Windows Media Player
Solve problems in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How can I search all the books addresses at once?
I created more books address a hundred. How can I do a global search in all address books at the same time?
-
Full sync Ipod with your music library
How can I get my new iPod to sync with ALL the songs in my library. It is only synchronization with 96 about 1,000 songs.
-
Satellite L300D-10 q - restore to factory settings
Hello I have just received this laptop and would like to recovery it to its factory settings, but no disk not supplied with the laptop and it had Windows XP installed on Vista. The recovery partitions are still present but I can't seem to restore the
-
HP pavilion g6: computer does not during start up
HIII, After I install the updates (from Control Panel - Action Center) when I restart the computer, it says: work on the updates. After 10-15 minutes when this is done it again by flashing "HP" on the screen (start-up). And then it gets stuck. I left
-
I received a phone call from someone claiming to be a Windows IT person. He said that they had received many messages of error in my computer. He said that he was afraid that I had a type of virus that affected my motherboard and I would please on my