When I try to create a query by going to links > > Recordset, it crashes every time.

Similar Questions

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• Just installed on my Macbook Pro 13 elements, and when I click on the file to open and edit a photo, it crashes every time!

  When I click on file, open, pictures, it crashes! I downloaded the program from Adobe yesterday, checked the updates and downloaded three new updates but cannot open any photo to change. Someone knows what's the problem?

  You use the new Photos app, no doubt. It's just how it is with Photos and an editing program that does not use the apple photo browser:

  How to use an external editor with Photos for OS X | IVous

• Error message when I try to create or reproduce a numbers document.

  When I try to create or reproduce a numbers document, I get the following error message:

  'Untitled.numbers' could not be moved, because you don't have the permission to access the 'Documents '.  To view or change permissions, select the item in the Finder and choose file > read the information.

  So far, I have never had a problem creating or duplicating a numbers document.  I don't understand why I get this error.  Can someone please help me fix this so that I do not continue to have this problem.  Please note that documents Pages works fine.

  Hi stelcon,

  I see that you encounter some problems with the permissions on your Mac running El Capitan. I have two articles for you who will guide you through the following steps to resolve this problem:

  Set permissions for the items on your Mac OS X El Capitan:

  https://support.Apple.com/kb/PH21997

  OS X El Capitan: If you do not have permissions to open a file or folder

  https://support.Apple.com/kb/PH22196

  Thank you for coming to Apple Support communities!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Why do I get Briefcase icon when I try to create a new folder in the documents or images in Vista, it just started

  Vista family 32-bit premium get portfolio when I try to create new folders and when I download pictures, they show photos, I have to click them all to open?

  Close the browser and start a command prompt
  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
   
  Then to restart the Explorer after trying all of the following
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer
  Delete the thumbnail and icon Caches
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

   

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

   

  del "% userprofile%\AppData\Local\IconCache.db".

   

  del "% userprofile%\AppData\Local\*.db" / q

   

   

• When I try to create a (new folder) the Briefcase icon appears instead

  When I try to create a (new folder) the Briefcase icon appears instead. What is going on? When I try to create a (new folder) in some files, it tells me that the choice is 'empty' what can I do to get the files works again?

  * original title - cannot create a "new folder."

  Hello

  ·         Did you make any changes before the show?

  I suggest that you create a new user account and check if the problem persists since the new user account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not persist and then follow the link below to fix the corrupted account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• When I try to create a restore point, I get this message: Systempropertiesprotection.exe - corrupted file.

  When I try to create a restoration point, a message is displayed on the lower right part of the screen and I get this message: Systempropertiesprotection.exe - corrupted file.
  In addition, it tells me to run Chkdsk. I am doing and not of results. If I search for the file, Systempropertiesprotection.exe happens in several different directories along with one. Record of MUI with the same name. The computer seems to work very well, but my suspicions are triggered. Any suggestions?

  Hi Popo75,

  Let us try the following steps to solve the problem.

  Step 1

  Sometimes the malware could have disabled the files. Try to run an online scan and see if it helps.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If this does not help, try the next step.

  Step 2

  Try to run the Design Checker (SFC.exe) system files and check if the problem persists.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Check the link for more information:

  http://support.Microsoft.com/kb/936212

  Step 3

  If the problem persists, create a new user account and check if you still have the problem:

  To create a new user profile:

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Check out the link for more information on creating a new account below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer or useful you help others find the answer more quickly.].

• Access denied message when you try to create a zip folder windows 7 Home premium

  I reinstalled windows yesterday and now get an access denied message when you try to create a zip file

  If you are still having the same problem with your zip files, please see the thread below for assistance.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/issue-can-not-create-zip-folders-in-Windows-7-home/4eeba066-e741-4267-AA5D-910e4bf43b82

  Thank you!

• When you try to create a system image, receive the error code 0 x 81000019

  Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

  Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

  So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

  The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

  So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

  All my old computers is standard backups without any hassle... Just this new machine with Win7.

  (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

• When I try to create an account, I get a: = 403 Forbidden error

  I'm setting up eprint for my new Oggicejet HP 6700 Premium.  When I try to create an account, I get the error of the object (403).  What I am doing wrong?

  Hello

  Please try another web browser, OR clear all the cache, history and cookies, then try again.

  Kind regards.

• When I try to create a new folder of file I get the error Code 0 x 80070570

  When I try to create a new folder of file I get the error Code 0 x 80070570

  Hello Denny,

  
  Thanks for the reply with the State of the question, sorry for the caused incontinence.
  I suggest you follow the suggestion of Babu V replied on 16 may 2013
  Reference:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/unable-to-create-a-new-folder-in-c-drive-get-the/75bbf947-094a-45E6-baf6-6b188f8d8ca0

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please respond with the State of the question of assistance in
  Windows.

• When you try to create an ACCT. I get a 403 forbidden error code

  I'll put up my new 6510-e and when I try to create an account, I get a 403 forbidden error code.

  I can't get far enough to get the code for my printer.

  I discovered that you will not get the error if you use Firefox. Everything works as it should.

  Must be Internet Explorer causing the problem.

• When I try to create a link in dreamweaver bootstrap in the usual way I can't do.  What I'm trying to link disappears?

  When I try to create a link in dreamweaver bootstrap in the usual way I can't do?  I selectionner select text, bind it to another file and the text I've selected disappears?  Why can't I create a link in dreamweaver?

  What color are the links in your style sheet?

  If they are white text on a white background, you will not be able to see them.  Try changing your background of a contrasting color.

  Nancy O.

• When we try to create a shape with a predefined size above 10 x 10 inches of ps cs6, we get the next value in A message between 0.00 10.00 inches and thumb is necessary.  Close value inserted.

  When we try to create a shape with a predefined size above 10 x 10 inches of ps cs6, we get the next value in A message between 0.00 10.00 inches and thumb is necessary.  Close value inserted.

  You could put in your dimensions in the boxes of fixed size .

  Then just click on you document and move the object slightly before releasing the mouse if you don't get this pop up dialog box to create a Rectangle rounded.